Question about Stanley TR250 H Heavy Duty Heavy Duty Staple/Nail Gun w/ Free Staples

3 Answers

Inserting brads into my Stanley TR250 Staple Gun

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I bought one of these guns today and I had the same problem and it took me about 2 hours to figure it out as the instructions were very poor. Here how to load the brad nails:-

(a) Pull the slider bar all the way out
(b) Place the brad nail stick on the left side, IN FRONT OF the slider, NOT in the narrow gap in front of the two arrows where it says "LOAD BRADS"
(c) The nail heads should be facing the handle of the gun
(d) Close the slider and lock it
(e) Try it out. I tried nailing hardboard onto chipboard. The lever at low power only put the nail in about 30%. On Hi power it went in about 80%.

Good Luck
Peter

Posted on Jan 31, 2009

  • mmarnye Sep 06, 2010

    Thank goodness somebody finally explained it to where someone could understand it!! Thank you, it took me about two minutes to load the brads after i read your answer!!
    Melanie

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Here is a video I made showing how to put brads into a Stanley TR250.
https://www.youtube.com/watch?v=J1y5kYgRodk&t=15s

Posted on Mar 10, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,176 Answers

I have tried several times to download a breakdown for this tool but it is unreadable, but from what I could see it looks like if the stapler is upside down the brads load on the left side. Stanley sometimes has live help that you could try. Sorry I couldn't help further

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I load the stapler?


No you don't. We answer most things here.

If the stapler is like any of these

http://www.amazon.com/s?ie=UTF8&page=1&rh=i%3Aaps%2Ck%3Abostitch%20staple%20gun

You push the back in slightly to unlatch it and then drop it down a bit and the staple pusher comes out completely.

Jan 28, 2016 | Heavy Duty Stanley Bostich Heavy-duty...

1 Answer

How to put back together


Stanley Model TR45 Light Duty Staple Gun Review - YouTube

? 3:35
https://www.youtube.com/watch?v=hWmvXhkqnYI
Jul 25, 2012 - Uploaded by Vansvideoreviews
Stanley Model TR45 Light Duty Staple Gun Review ... How toPut Staples in a Craftsman Stapler (Model 968447) ... Stanley SharpShooter Manual Staple and Brad Gun review - Duration: 9:35. by Unpack Guy 35,948 views.

How to load staples into a Stanley Stapler - YouTube

? 2:11
https://www.youtube.com/watch?v=j4Q5W0uKS-s
Mar 26, 2013 - Uploaded by David DeStefano
This video shows you how to load staples into a Stanley StaplerModel # TR110. ... Stanley SharpShooter Manual Staple and Brad Gun review ...

put stanley sharpshooter staple gun back together ... - Fixya

www.fixya.com > Forum > Tags
Find solutions to your put stanley sharpshooter staple gun back together question. ... staples for the TRE500 Stanley Sharpshooter Electric Heavy Duty Stapler.

Dec 10, 2015 | Stanley SHARPSHOOTER HEAVY-DUTY STAPLE GUN

1 Answer

HOW TO LOAD BRADS IN STANLEY TRE500


Please download the instruction sheet from the following link which explains how to load the brads. Make sure you have the correct size of brads mentioned at the bottom of the instruction sheet.

TRE500 Sharpshooter Stapler Instruction Manual

Aug 13, 2014 | Electric Stanley Tre500 Staple Gun /...

1 Answer

Loading staples into a Stanley sharpshooter staplegun


There are 4 staplers in the Stanley SharpShooter family. You drop the staples on top of the "slide out loader," then slide it into the gun. See models and staple sizes below:


TR150HL Stanley Sharpshooter
  • Stanley SharpShooter TRA700 series or Arrow T-50 heavy duty staples

TR150 SharpShooter
  • Stanley SharpShooter TRA700 series or Arrow T-50 heavy duty staples

PHT150C SharpShooter Heavy Duty Hammer Tracker
  • TRA700 series or Arrow T-50 heavy duty staples (1/4"-3/8")

TR250 SharpShooter Plus Heavy Duty Staple/Brad Nail Gun
  • Stanley SharpShooter TRA700 series or Arrow T-50 heavy duty staples and 1/2", 9/16" and 5/8" Brads

More information on the Stanley SharpShooter and a quick loading demo can be found here: http://www.expotv.com/videos/reviews/12/134/StanleyTR150HLSharpShooterHeavyDuty/185661

Sep 11, 2012 | Stanley Proto Stanley TR150HL SharpShooter...

2 Answers

How do you load nails in stanley tr250 staple and nail gun??


The magazine on the TR250 has a recess on one side as well as a relief at the top where the driver pushes them through the opening. Load the brads/nails on that side of the magazine and it should operate properly. AS A REMINDER: ALWAYS REMOVE NAILS/STAPLES/BRADS WHEN NOT IN USE AS THIS WILL WEAKEN THE SPRING AND CAUSE FEED PROBLEMS IN THE FUTURE.

Dec 22, 2009 | Stanley TR250 H Heavy Duty Heavy Duty...

1 Answer

Will only shoot one brad and then stops


its problem is too much oil or not enough. never the less, it needs taken apart and cleaned and inspected. make sure you are shooting the right guage and brand hardware. generic doesnt always work.

May 23, 2009 | Stanley Tools TRE550 Electric Staple/Brad...

1 Answer

Can you help with loading staples into a stanley sharpsshooter T50 staple gun


Look at rear handle bottom, Push in then pull out,load. Please rate. Thanks

Jan 25, 2009 | Stanley TR250 H Heavy Duty Heavy Duty...

1 Answer

How to insert fasteners


Already posted in response to a similair question, however repeated here to close off open query!

I bought one of these guns today and I had the same problem and it took me about 2 hours to figure it out as the instructions were very poor. Here how to load the brad nails:-

(a) Pull the slider bar all the way out
(b) Place the brad nail stick on the left side, IN FRONT OF the slider, NOT in the narrow gap in front of the two arrows where it says "LOAD BRADS"
(c) The nail heads should be facing the handle of the gun
(d) Close the slider and lock it
(e) Try it out. I tried nailing hardboard onto chipboard. The lever at low power only put the nail in about 30%. On Hi power it went in about 80%.

Good Luck
Peter

Jan 07, 2009 | Stanley TR250 H Heavy Duty Heavy Duty...

1 Answer

Tr250 does not drive brad nails all the way down.


Jason,

I think this is typical of these staplers/nailers. I bought a lighter model Stanley the first time and had this problem. I took it back and exchanged it for the heaviest Stanley they had at Home Depot and had the same effect. It drove the stapler a little deeper but not all the way.

I did find that if I put all the down pressure on the stapler right on the edge where the staple comes out and then pull the trigger it would drive the staple almost all the way in. I think that there is a recoil effect (like with a gun) when you pull the trigger and the staple enters the wood. Try this. it will help.


Hope this helps Good Luck Loringh PS Please leave a rating if appropriate Thanks for using FixYa

Nov 06, 2008 | Stanley TR250 H Heavy Duty Heavy Duty...

Not finding what you are looking for?
Stanley TR250 H Heavy Duty Heavy Duty Staple/Nail Gun w/ Free Staples Logo

3,907 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stanley Tools & Hardware - Others Experts

John Trevino

Level 3 Expert

1383 Answers

JOHN LAPIER

Level 3 Expert

2419 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Are you a Stanley Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...