Question about Acer Aspire™ T180 PC Desktop

1 Answer

Trying to Install New Motherboard in Acer computer

I have an Acer Computer and the motherboard went bad. I got a replacement board but am having some trouble figuring out how to hook it up. Do you know where I might find a schematic or guide to hook it up?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 585 Answers

The new motherboard should have came with a manual, that manual should identify all connection points on the motherboard. If you did not receive a manual, I would say that you did not get a new motherboard. If you got an exact replacement for your motherboard, you should be able to find the correct supporting documents on the Acer website. If it is a different motherboard than you had originally, then you might find supporting documents on the motherboard manufacturer's website. You will need to identify the motherboard by manufacturer and model #.

If you find my suggestions to be helpful, please share with us some details so that others may benefit from knowing the whole story. Thank you!

Posted on Jan 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My motherboard is dead replaced power supply still nothing


you may got a power spike if so board bad look at the board the caps are they round or flat if rounded on top bad board

Jan 13, 2013 | HEWLETT-PACKARD Hewlett Packard GV34469001...

1 Answer

C4 13


Could be bad thermocouple, or oxygen sensor, not enough fresh air to unit.
Probably bad PC board. Rheem will send new board and you can install yourself.

Bad PC board is kind of like the motherboard on your computer, so expect same level of performance after replacing motherboard ... which usually means the computer's days are numbered before another major problem.

Copy following links:
http://waterheatertimer.org/pdf/Fault-codes-11003.pdf
http://waterheatertimer.org/Troubleshoot-Rheem-Tankless-water-heater.html
http://waterheatertimer.org/pdf/Error-code-13.pdf

Sep 20, 2012 | Water Heaters

1 Answer

I have a Dell Vostro 410. It would not turn on - would just blink amber light and go "ping, ping" - So I had a technician come and he said the motherboard was bad - we put in new motherboard -...


Yes the motherboard is faulty. But it hasn't died on its own, it was damaged by something else in there - most likely the power source is defective and it has effectively fried the boards. The technician should have tested it before replacing the board. Call it again, make him test the source in front of you and if it's defective have it foot the bill for the repair.
If the source is OK then something else that is connected to the pc is defective so multiple test will have to be done.

Sep 14, 2011 | Dell Vostro 410 Desktop Computer

3 Answers

The computer will not power up, the board fan acts like it is going to start but then doesnt. I have replaced the ps but is still isn't working. do you have any advice?


The 2 most common problems for a no start up situation are bad motherboard or bad RAM. I would suggest trying the easiest things first, and that would be to remove 1 of RAM at a time, and if that doesn't fix it, put the stick that you removed back in and remove the other. This will tell you if it's a RAM related issue. Another thing that you can try is to just "reseat" the processor, making sure that it's seated in it's socket correctly. Hope that helps

Mar 07, 2011 | Acer Aspire X1200-B1601A PC Desktop

3 Answers

I have an hp pavilion a6030n that wont power up. I've tried multiple power sources, removing ram and battery and reinstalling and switching the power options on the back of the computer. Nothing is...


First thing you should try is another monitor. It's likely nothing is going to happen but if you get a picture, then that rules out the video card, which means you have a bad cable or a bad monitor. If you're plugging into an external video card, try plugging into the on-board video card. If you get an image then your external video card is shot. If you don't get an image, that rules out anything to do with your video card(s).
If this is the case then it's likely you need new Ram. You can see if this is the problem by removing the Ram and trying it in another computer. If the other computer stops working then the problem is due to faulty ram. If it still works, your ram is fine.

The next step is to test the hard drive. Again, take the hard drive to another computer and plug it in. If your hard drive is recognized, then something is wrong with your processor, the BIOS, or the motherboard.

It's a process of elimination to find out what piece of hardware has stopped working on you.

Jan 06, 2011 | HP Hewlett-Packard Pavilion a6030n Desktop...

1 Answer

Motherboard problem Acer 5641-U5520A


i will suggest you to send the computer to acer service center and they will replace the new mother board. it will take some time but apart from that they will also check other things as well. you are investing money to replace yourself which can cause more problem. mother board should be the right one so that it should match with the other components of your comp. it wil cost you bit more but the factory fittings will be better than what you will do yourself and risk involved is less. you can also claim them if anything goes wrong. it doesnot matter if it is out of warranty or in waranty. dude you are paying the money and thats more important.

May 10, 2010 | Acer Aspire AM5641-U5520A PC Desktop

1 Answer

I have a dell dimension 5100 desktop, I installed a new graphics card and 2 days after it wouldnt start. So im trying to find a replacement motherboard for it, the motherboard is a j8885 and im trying to...


hi there, it may not be the mother board, it may be that the graphics card doesn't have the drivers for your system. Bring it to a computer shop and they will install the drivers for you.

Jan 30, 2010 | Dell Dimension 5100 (D51L1) PC Desktop

1 Answer

ACER S2W 3300U Flatbed not "connecting" on Windows ME system.


Go into your device manager to see if there is an error.  If there is don't install the software, instead install the driver first.  I would also try to unplug the scanner from the computer and plug it into a different port and wait for Microsoft hardware wizard to pop up and point it to the cd for the driver.

Jan 13, 2009 | Acer Scan to Web 3300U Flatbed Scanner

1 Answer

Hit by Lightning


No Mother board is compatable.
The Motherboard and hard drive are paired and cannothe be replaced.
The best thing to do is to buy a new computer and use the Harddrive as a slave on the new one.

Jul 10, 2008 | Acer Aspire T135 PC Desktop

Not finding what you are looking for?
Acer Aspire™ T180 PC Desktop Logo

641 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

556 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...