Question about Breville ESP8XL Espresso Machine

1 Answer

I believe the heating element has given it up and I need to know if there is an authorized repair center in Amarillo, TX.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Look on the web, chris322. if you don't find a repair center for Breville in your area, try other main brands like saeco, et al. they may laugh & tell you to buy a better machine; at the very least expect to spend a bit to fix it. don't rule out the possibility of a bad knob or loose wire, though. i suggest checking out ebay or craigslist. starbucks barista machines usually go for $200-$250, and if you buy one used face-to-face and it's working, it will most likely continue working for long while. try finding a heating element to replace it, and call around to electrical repair shops to see if they'll put in it for you. good luck to you!

Posted on Jan 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My milk frothier is not heating milk?


I would say the heating element has burned out, or the thermostat has failed. Given what they cost new, you may as well buy another, for which you will have a warranty. I believe repair will be uneconomical.
.

Nov 26, 2016 | Coffee Makers & Espresso Machines

1 Answer

Heating element


there is a number on the heating element, the model of your toaster oven should be on the backside of the unit itself, armed with this info, you should be able to find a replacement element

Jul 28, 2013 | Cook's Essentials Cooks Essentials Arome...

1 Answer

I need two rubber hoses that supply water to the heating element. Where can I acquire these?


try a auto parts store they should have what you need for a fraction of the cost of parts at a service/ repair center. Mike

Dec 07, 2012 | Cuisinart DCC-1200 Coffee Maker

1 Answer

My Keurig Special Edition model has a ruptured heating element which is filled with a white substance packed around the inner element. Obviously, this substance has been going into our coffee. What is it...


I believe this is a ceramic filler... non conductive... takes the heat... and I dont know what the health risk is.

google digesting ceramic might give you an insight.
we know it's not asbestos... they dont use that product anymore...

Only thing else I can think of is Mica... they use that in toasters...

May 02, 2010 | Keurig B60 Coffee Maker

2 Answers

HEATING ELEMENT IS RURNED OUT


You can order a new heating element from the manufacture. But, the crimp connectors and the thermo-fuse may also have to be replaced. You will need the crimp tool for the crimp connectors. You will also need a meter to verify the connections.

If you take the unit to an appliance center they can service it for you. But, you may find the cost of the parts alone to not be feasible.

Jerry G.

Jan 07, 2009 | Bunn Pour-Omatic Coffeemaker, 10 Cup White

1 Answer

Coffee urn heating element not working


there are 3 or 4 componants inside that could cause the problem.
if you can use an ohm meter, check all of them for continuity.
a switch
overtemp fuse
perk control fuse, or keep warm fuse
element
all should read "short " or almost 0 ohms when the unit is unplugged '

Dec 14, 2008 | Faberware 12-55 Cup Coffee Urn

2 Answers

Slow and low heating/temp


When a machine takes a longer time to heat up, this is often due to scale on top of the heating element, try using a descaler product, and running a descale cycle a couple of time.

If it is not a scale problem, then it is usually a faulty thermostat or a faulty element.
When it is a faulty thermostat water gets hotter than normally.

Nov 22, 2008 | Saeco Vienna SuperAutomatica Coffee...

4 Answers

Mr Coffee


If your coffee maker is under a year old, take it to a authorized service center for free repair or replacement.If its over a year then the complete heating element assembly must be replaced.However, this part is only available to authorized service centers and is not sold to consumers.

Nov 04, 2007 | Mr. Coffee 072179228578 12 Cup Coffee...

1 Answer

Delonghi Coffee Maker


You need to take the unit to an authorized repair shop and have the heating element replaced

Sep 01, 2007 | DeLonghi DCM485 Coffee Maker

2 Answers

Trips ground fault on plugging into receptacle


You have a leak on to and electrical component or an element that is bad. Stop using it due to possible electrical shock and take it to an authorized repair center or get a new one.

Jul 30, 2007 | Keurig B60 Coffee Maker

Not finding what you are looking for?
Breville ESP8XL Espresso Machine Logo

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Breville Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Breville Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...