Question about Sony FD Trinitron WEGA KV-20FS120 20" TV

1 Answer

I get no channels wen i plug in my cable wire into the cable jack

There is two jack or ports on a used sony kdp-51ws550 i just bought being the cable port and the vhf/uhf port and i seem to get 9 channels when i plug in my cable wire only to the vhf port and only digital channels. but when i plug in the cable wire to the cable port it seems to get not even one channel. what can i do to solve this problem?

Posted by on

  • jose_12_lope Jan 07, 2009

    i went to the channel settings but it gives me no option for cable yes/no! i also have many adapters for my 2 other tvs that have cable as well. but i still cant figure out the problem

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 67 Answers

Hello,

First, I would change the cable that comes from the wall to the TV.
Plug the cable into the cable port, then go into the menu of the TV. Go to the channel setting and go down to where it says "CABLE YES/NO"and change it to cable YES. Then try to re-autoprogram it.

If there are no channels found after that, then you may have an issue with the tuner.

Posted on Jan 07, 2009

  • waynejamescm
    waynejamescm Jan 07, 2009

    Hope this helps you out...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I recently received an admiral tv and i was looking for the audio and video jacks/ports and could not find any... are there any ports? it is n admiral tv and the model # is GOJ 12028


If there are no A/V jacks on the set you can get a RF modulator. They are cheap on Ebay and work great. All you would do is plug in your A/V plugs into the RF modulator and then plug in a coaxial cable on the output of the box then plug the other end to the input coaxial cable jack on the TV. Make sure your TV is on the channel your RF modulator specifies.

Aug 31, 2012 | Televison & Video

1 Answer

I am trying to plug a play station 2 into the rca f19240 and do not see ports for the three colored prongs that I need to conect


Many of RCA's smaller sets didn't come with AV input jacks. They only had a connector for an antenna or cable wire. To use a device like a DVD player or game console with a TV like this, you need an RF modulator. This takes the audio and video signals (those three cables you can't plug in to the TV right now) and creates a signal that the TV can tune in on channel 3 or 4. Unless you replace the TV with one that has AV inputs, the modulator is your only solution.

Jun 21, 2011 | RCA F19240GY 19" TV

1 Answer

I have a sony color rear projector model kdp-51ws550 seial 9710095 manufacture june 2004 it turns on and it goes off the stand by light keeps blinking


Hi there,

Well If you simply push the power button on the front, does the stand-by LED turn off or start flashing? Anyway the G Board is definitely suspect. Try measuring the 5 volt DC stand-by power supply. That is best done at connector CN605, between pin 10 and cold ground (any metal chassis part). 

If that voltage isn't there, carefully measure the voltage across resistor R607 ( not to any ground). You should get something very low, a couple of volts (if that much). If you get a couple hundred volts, that resistor is open, and that happened because transistor Q601 shorted.
Note. You need a ohms meter to check that all. please do not try this if you do not know how to do that.......
Please post comments for more help or information........

Good Luck!!

Thanks

Jan 05, 2010 | Televison & Video

5 Answers

No connection DVD to G25189TK. No external channel set. (3 or 4)


to see the dvd video you should select the AVmode using your TVremote.if the wires are not properly connected you cant see the picture or video.try to connect the wires in the front panel or the back panel.try to connect the wires as per the notes given as audio input,video input etc.

Dec 06, 2008 | RCA G27647 27" TV

2 Answers

No cable


try going into the menu of the tv and changing the tuner type from ANT to Cable

Jan 28, 2008 | Sony FD Trinitron WEGA KV-20FS120 20" TV

1 Answer

Trinitron KV20FV12 sony


check the video cable first / next try using a s-video or hdmi cable some dvd players you have to select the way the picture is sent from the dvd player

Dec 10, 2007 | Sony FD Trinitron WEGA KV-20FS120 20" TV

1 Answer

Sony bravia to my P/C


You need to wire up the audio from the computer.
The 15 pin cable is only the video, next to the input on the tv should be a red and white phono connector which should say audio or line in, get a cable that has a headphone type jack on one end and 2 phono red and white plugs, connect the headphone jack into the back of the pc, should be the green audio out where you would usually connect pc speakers, then the phono plugs into the back of the tv and insert them into the phono ports on the back of the tv that say line or audio in. Turn the TV to PC and thats it.

hope this helps

Dec 02, 2007 | Televison & Video

1 Answer

Vertical line running through video channels 1-4


Interchange the video channels 1-4 and 5-7. Now check white vertical line in video port 5-7. Suppose you get problem remove cable television cable from tv during another two port running. These type problem occurs only when RF disturbance from cable television or video ochannel ports cable wire ground problem. I found there is no problem in tv. External source only the problem. I hope above details give you the better solution.

Aug 23, 2007 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

Can't get cable or any channels


Do you have another TV set you can test the cable with? It possible the TV you bought has a bad tuner. Or your cable line is dead.

Jun 30, 2007 | Sony KV-32V25 32" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-20FS120 20" TV Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

98608 Answers

The Knight
The Knight

Level 3 Expert

69570 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...