Question about Miele DA326-1i Kitchen Hood

1 Answer

I need to onlock safety lock on hood

Safety lock on can't get hotplates to work. How do I unlock it. What is the code .
Thanks for your help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Sep 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

EO2 error -what does it mean, can it be fixed? How do you fix it?


It depends on the cause which can be a short circuit or faulty thermocouple, element failure or the opto/triac driver faulty.
You can check the error codes in the attached link http://www.torontomicrofluidics.ca/cms/manuals/hotplate.pdf

Apr 23, 2015 | Fisher Scientific Isotemp Basic Ceramic...

1 Answer

How to change the light in technika range hood


Safety is important when is comes to replacing a light bulb of a range hood. The first thing to remember is to turn off power and allow lights to cool before proceeding.
home light

Jun 03, 2012 | Kitchen Ranges

1 Answer

My Broan range hood keeps going up and down. Will not stop. I unplugged it and plugged back in but keeps going up and down. The hood is almost 2 yrs old. Pls help. Thank you.


This sounds like something has got into the track area and is setting off the safety. they are designed to stop raising or lowering if they meet any resistance and anything in the track area will cause it to happen in both directions

Jun 26, 2011 | Broan-NuTone Best by Broan DD01 Series...

1 Answer

How do you replace?


Kitchen hood replacement can be completed easily with a family member or a friend. While you may wonder why anyone would replace a kitchen hood, the answer usually is simple. Here is how to replace a kitchen hood.
Tools Needed

  • New Range/Kitchen Hood
  • Screws
  • Screwdriver
  • Friend
  • Wiring Nuts
  • Circuit Tester

Warning: Remember that you are dealing with electricity, so stay away from water and use all safety precautions issued by the manufacturer.
Step 1 - Shut off Electricity

Remember to turn off the electrical supply to the old kitchen hood. You will need to do this via the circuit breaker box. Wait for 10 to 20 minutes and then test the wires with the circuit tester to double check that no electricity is being supplied to the kitchen hood.

Step 2 - Remove Old Hood

After you know for a fact that it is not receiving an electrical current, you can begin the process of removing the older kitchen hood. You should first take off the electrical wiring cover that is located by the light fixture. Then have your family member or friend hold up the old kitchen hood while you remove any screws or bolts from it. Once that is done, you can then freely slide it off.
Step 3 - Check Wiring

Double check that you have at least 12 inches of wiring to connect your kitchen hood to the wall. It should be noted that if you have a kitchen hood without vents, proceed to step 5 next.
Step 4 - Find the Ducts

If your new kitchen hood has vents, you will need to locate the fan or vent duct. Once you have found it, you can open up the vent hole where it will belong.
Step 5 - Wires

Open up the covering for the wiring and put the covering in a safe area for easy reach.
Step 6 - Install the New Kitchen Hood

Have your friend or family member hold up the kitchen hood and mark the areas where the screws or bolts will be. Then have them put down the kitchen hood and screw in the screws half way into the holes. After that, you can slide in the kitchen hood.
Step 7 - Route Wiring

Lightly pull the wiring through the proper holes and connect both black wires from the new kitchen hood to the black wire from the wall with a wire nut. Then connect the two white wires from the hood with the white wire from the wall, again using a wire nut. Next, connect the green wire to the green ground screw. Then place the wire covering back on.
Step 8 - Tighten Screws

Finish tightening the screws in place.
Step 9 - Test

Check to make sure the fan and light work. If it is supposed to vent outside, make sure that the air is leaving the vent with no issues. If something does not work proper, repeat steps 6 and 7 until everything works well. Remember that you will be working with electrical equipment, so follow safety measures issued by the state or the city.

Jan 29, 2011 | Kobe RA9436SQB Kitchen Hood

1 Answer

Stopped working after power outage


If you cannot fix - too expensive or whatever - consider a replacement with a five year 100% parts and labor warranty and in-home service. Imperial (made in USA) is the only range hood manufacturer that offers this. More information here: www.vent4less.com

Regards,

Donald

Jul 12, 2010 | Frigidaire (PL36WC40EC) Stainless Steel...

1 Answer

Dripping kitchen exhaust fans


It sounds like there is a restriction in the vent or the hood is to low. It should be at least 18" above the cooking surface.

Jun 24, 2010 | Zephyr Cyclone AK6500 Kitchen Hood

1 Answer

Kitchen Aid downdraft hood stuck in retracted position


The filters need to be seated properly to complete an electrical safety circuit. This keeps the unit from operating without the filters. The best way I have found to fix them when they get dislodged in the closed position is by using two spatulas. The first is used to move the filter forward a bit and the second is used to keep it pushed tightly forward to complete the circuit.

Apr 03, 2010 | KitchenAid KIRD861HSS Kitchen Hood

1 Answer

Microwave shuts off and reflects f-9.


F 9 means Fault Code 9. This means that the Microwave has developed a "Fault" and the "Brain" has determined what it "Thinks" the problem is and outputs that "Code" so a serviceman can consult the manual, to find the exact "Fault". In all likelihood the mangnetron has failed, or perhaps even the Power Supply. or a fault that is shutting the system down for safety reasons You need to have it serviced by a reputable service centre/man. Ensure you get a firm "Quote" before proceeding, and remember these days the cost of repair can equal or exceed the price of a new one.

Feb 12, 2010 | LG 30" Over the Range Microwave Hood with...

1 Answer

The wiring from the fan on my cooker hood has no earth is this ok


yes mam earthing is must and should be provided because of safety for the equipment and the operator,

Oct 06, 2009 | GE Monogram ZV1050SFSS 42" Island Chimney...

2 Answers

Zephyr Typhoon control panel replacement


Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Feb 20, 2009 | Zephyr Kitchen Ranges

Not finding what you are looking for?
Miele DA326-1i Kitchen Hood Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Kitchen Ranges Experts

yadayada
yadayada

Level 3 Expert

63455 Answers

Jim Thurston

Level 3 Expert

669 Answers

kakima

Level 3 Expert

98758 Answers

Are you a Miele Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...