Question about Jenn-Air JJW8230D Electric Double Oven

1 Answer

Beeping and F7 when cleaning

I was cleaning my Jenn Air bottom oven when it started beeping and flashed F7. What does it mean?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 725 Answers

F7 stuck keypad
Stuck keypad may mean relay is turned on.
Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

Posted on Sep 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The oven is randomly beeping and the display is reading f7


Hello & Welcome to FixYa
F7 error code is displayed when the clock assembly/electronic oven control (ERC) goes bad and needs replacement. Please get back to me if you have any other questions.

Apr 10, 2011 | Jenn-Air WW30430P Stainless Steel Electric...

1 Answer

I have a jen air propane oven and four stove burner and it is flashing a the code f7-1 and saying call a a tech. Please help the beeping is very annoying


Hi, the error code implies that the Function key shorted or stuck..
You need to replace touch pad or if touch pad is part of the clock, replace the clock (ERC).

Oct 20, 2010 | Jenn-Air JJW8530C Expressions Collection...

1 Answer

The oven keeps beeping and displays "F7" as an error message.


Hi


Thanks for using FixYa. Error F7 on your oven means that the keypad is shorted or stuck and to resolve this issue you’ll have to replace the Electronic Range control (ERC). Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Aug 25, 2010 | Jenn-Air JMW9530C Stainless Steel Oven

2 Answers

F7 is displayed on my gas range and it's beeping


F7 on jenn air usually means you have a stuck or shorted key on the key pad. If it has a separate keypad you can just replace that or try disconnecting the keypad from the control board and cleaning the connection/ribbon with a pink eraser if possible. This rarely solves the problem but is worth a try. If it doesn't have a separate keypad you'll need to replace the whole ERC. (Electronic Range Control) It's usually the most expensive part of the range. Good luck!

Apr 28, 2009 | Jenn-Air Ovens

1 Answer

Beeping


Here is what the fault code means:

F7 Function key shorted or stuck button Replace touch pad or clock assembly (also called the ERC) or attempt to un-stick button

I hope that this helps for you

Apr 20, 2009 | Jenn-Air Ovens

1 Answer

F2 code


F-2 error for jenn-air means the oven is to hot, it could be the oven temperature sensor is faulty, or the relay board.

Mar 29, 2009 | Jenn-Air WW30430P Stainless Steel Electric...

3 Answers

Jenn-Air WW30430W double oven flashing F7 and beeping


It seems you have a stuck button. Here is a list of fault codes:

JENN AIR
Range/Stove/Oven Fault Codes
Failure
Code
Condition Check/Repair F1 Defective touch pad or membrane Replace touch pad or membrane (this problem is usually the touch pad) F1 Watchdog on board Replace touch pad or clock assembly (also called the ERC) F2 Oven too hot Replace relay board (if present) or oven temperature sensor F3 or F4 Open or shorted oven temperature sensor Replace oven temperature sensor F5 Hardware and watchdog circuits disagree Replace clock assembly (also called the ERC) F6 Missing AC signal Check for proper voltage F7 Function key shorted or stuck button Replace touch pad or clock assembly (also called the ERC) or attempt to un-stick button F8 Analog/Digital supervisory Replace clock assembly (also called the ERC) F9 Door latch supervisory Check door lock circuit or replace clock assembly (also called the ERC) F0 Function key stuck Replace touch pad or clock assembly (also called the ERC)

Dec 09, 2007 | Jenn-Air JJW8530C Expressions Collection...

Not finding what you are looking for?
Jenn-Air JJW8230D Electric Double Oven Logo

Related Topics:

515 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Ovens Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Jenn-Air Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...