Question about MediaFORM CD 3702 Burner

1 Answer

Reinstall Os Is it possible to reinstall os on mediaform 3702. I don't know what OS it has installed before. Harddisc has crached and will replace it with a new. Can this be done.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 657 Answers
Re: Reinstall Os

I'm not entirely familliar with this system and also it appears to be discontinued from the manufacturer, it may be possible to "clone" a disk from a working one using Norton ghost or something similar. (but that means finding someone willing to let you dissasemble their working one), with norton ghost you should be able to copy entire disk from the working disk to a new disk. the manufacturer does have a firmware update disk for this but that most likely only updates the system once it is working. Gareth

Posted on Jul 26, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Dear Sir, Madam My computer crashed and now all

If you have the software to your ( OS ) Operating System re-install and boot from the CD. There should be an operation for repair or reinstall for now choose repair. Allow the computer to boot and then reinstall all your software including downloading the latest drivers for your NEC be sure the drivers are compatible with the ( OS ).

Feb 28, 2011 | NEC ND-3550A DVD RW Dual Layer Burner

1 Answer

It says my DVD is working properly but I cannot open the drive....I manually opened the drive and I can't close it without doing manually also. the light comes on but it is not responding.

check the dvd drive and see if there is any damaged on its plastics that may cause the issue. make sure the drive tray is not being stuck and nothing is preventing it from opening or closing. next, try to remove and reconnect its power and data cables. Using different cables if available may also help. if using the eject button works, but not through the OS, a possible reinstall of the driver, the firmware and even of the OS may be necessary. if all else fails, there is a chance that you may need to get a drive replacement.

Sep 05, 2010 | ASUS DRW 24B1ST Disk drive DVD RW ( R...

1 Answer

My computer says software not found but i have burned over 100 cds on my computer

plz b more detailed in describing, is it a case of a particular software..??
however, probably ur ram is faulty..replace with a standby n see..
also check for defective capacitors on the main/mother board..
reinstall os..

dis also do happen when ur cd/dvd rom drive is down or the cd frm where u r installing is corrupted.. ur system admin/vendor....

Oct 26, 2009 | Dell CD & DVD Burners

1 Answer

Dvd writer is not reading any cd

try re pluging in the ribbon cable make sure it is in right. then put a know dvd intothe drive and see if it reads it if it don't then the drive is bad the 16 speed has a stand alone driver so you could try reinstalling the drive also check that the DVD player is not disabled in bios.

Sep 15, 2009 | LG GSA-H42N 18x DVD RW DL IDE Drive...

1 Answer

How do you reformat a computer

Assuming you don't mean the BIOS...
It suffices usually to reinstall Windows or whichever OS you intend to use. You let the installation program format the partition (watchout you loose all data which was on that partition)

Jul 28, 2009 | Dell Inspiron 1525 1526 24x CDRW/DVD Combo...

2 Answers

About installation

If you do have some backup on your file, you need to have other Hard Disk Drive to copy all of the files inside.

Jul 27, 2009 | Dell Inspiron 1525 1526 24x CDRW/DVD Combo...

1 Answer

Cd burner not working

mac is more about the looks and there a lot of bugs with it .it could be the os.what you can do is get a vista cd install it on the mac and then later on install the mac will make your pc run a lot better and not have that many problems with the machine it self.if you don't know how to install the os then you can look online or if you don't have a cd borrow one.(exept for the mac os.because the cd is coded to work with only machine with the same code on it.)if you can't find the cd's then take it to a pro and ask him to install a daul os. if you got any more question feel free to email me at

Jul 15, 2009 | Apple CD & DVD Burners

6 Answers

Philips DVD +rw DVD 8801

I'd first try another burning programming to see if it works. if not I'd try the drive on a different pc to ensure its not the drive. if the drive works on another pc then i will reload the os and dell recommended if it doesnt works i'd returen if for warrenty if it has any or i'd replace the drive myself :)

Let me know what happens :)

Dec 28, 2007 | Dell Optiplex GX270SFF (5U825) Burner

1 Answer

Harddisc crashed

Take a look here

May 29, 2007 | MediaFORM CD 3702 Burner

Not finding what you are looking for?
MediaFORM CD 3702 Burner Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top MediaFORM CD & DVD Burners Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Richard Roberts

Level 2 Expert

198 Answers


Level 3 Expert

6993 Answers

Are you a MediaFORM CD and DVD Burner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides