Question about Cisco Aironet 1131AG 802.11a, 802.11g/b (746320933474) Wireless Access Point

2 Answers

Steps for testing en repairing tthe Access point

I have problems with my access point. Don't know the problem,but also i can't connect to the access point!! Can u give me some usefull steps in determining what the problems might be?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We mistakenly assigned 3 from 6 existing ip addresses to new switches.

These addresses were already configured on 3 1131 ap's .

Now we have removed the addresses from the switches but cannot get the WLC 4402 to register the ap's.

Have re booted the WLC and ap's a few times but problem persists.


Can you help please..?

Posted on Nov 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

Try my tips and start connecting to access point using LAN cable

Posted on Jan 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an issue with Wireless Access Point D-Link DAP 1155 When i'm connected to the internet via WiFi by mobile device (different ones Galaxy Note 1, Galaxy Note 2, Galaxy ACE) when browsing internet is...


Do other wireless laptops connect to your wireless router, and give good speeds? Do you have many wireless networks, other than your own, that show up when you try to connect? It could be interference from other wireless networks in your vicinity.

Aug 21, 2013 | D-Link Computers & Internet

1 Answer

Connecting wireless router to server


If routing and remote access is enabled on the server, it should handle the bridging automatically between the two nics...

Otherwise, simply turn off the DHCP in the router, have the server and all the clients connect to the LAN ports, and they will automatically get their address from the server. In this scenario, you don't need to worry about the WAN port on the router.

But you might want to think about using the WAN port on the router to provide an added layer of security rather than exposing your server directly to the internet. You can set up all the port forwarding you need on the router.

More info here:

http://www.dlink.com/us/en/support/product/dwl-g700ap-high-speed-2-4ghz-802-11g-wireless-access-point

The manual is here:

http://www.dlink.com/us/en/support/product/-/media/Consumer_Products/DWL/DWL%20G700AP/Manual/DWL_G700AP_Manual_EN_US.pdf

You need a pdf reader (adobe) to read the content.

Good luck.

Nov 18, 2012 | D-Link DWL-G700AP 802.11g/b Wireless...

1 Answer

Only power light goes on when I reconnect to electricity. WLAN and LAN lights stay off


It sonds like you are ethernet connected to the Edimax from your home computer. Can you access a wireless connection? If so Try This:
Unplug the ethernet connection between the PC and the router. Exchange the connection (The ethernet connected to the PC place it in the Edimax and Put the connection from the Edimax into the PC) Check to see if you have a connection light on both devices.
Reboot you Edimax and PC. First turn on the PC and let it power up to the desktop. Once the PC is on then power on the Edimax. Now check to see if you have a connection. If these steps don't work I suggest you try replacing the ethernet plug connected between both devices.

Good luck!

Aug 14, 2012 | Edimax EW7416APn (EW7416APN) Pre80211n...

1 Answer

Can't configure netgear access point wg602


try to access the the router by using address 192.168.1.1, if this don't work then reset the router and used the factory setting in the manual

Mar 25, 2012 | NetGear WG602 802.11g/b Wireless Access...

1 Answer

Hi i have a d-link dwl-g700ap and i cant acces the wifi from my garmin-asus a50 nuvifone , i know its not the phone because i can connect on everyother network . please help


Go to your management software inside the access point. Default IP address is 192.168.0.50. If you changed it, go to that address with a browser. Default login with "Admin" without a password. If you set up a different administrator id and password then login with those credentials.

Go to the "Advanced" tab. The setting on the MAC address settings are important here. Hopefully you know how to get the MAC address of the phone. I don' have the same phone so I can't tell you how to get it. Ensure that you have entered in the phone's MAC address and any other devices that you connect wirelessly to. If you have registered the MAC address under the second radio button or you have the first radio button clicked, you have a WEP or other password issue. Many public access point don't filter any MAC address and don't require passwords. When setting up at home, you do have to at least these up.

Hope this helps.

Aug 06, 2011 | D-Link DWL-G700AP 802.11g/b Wireless...

1 Answer

I cannot find the default ip address for Cisco AIR-AP1242AG-E-K9. can anyone help?


Hi, The Access Point does NOT have a default ip address

below is quick setup guide to the Access Point

http://www.cisco.com/en/US/docs/wireless/access_point/1240/quick/guide/ap1240qs.html#wp41082

May 30, 2011 | Cisco Aironet 1242AG (AIR-AP1242AG-E-K9)...

1 Answer

My cisco wap4410n won't let windows 7 connect


Dear Romo

i have had lot's of problem with the WAP 4410N
the usual solution was to reset the Access Point
and in some case you have to reset it to factory default and set it up again try change the channel of change the location of the Access point for testing only

yesterday i face a problem with WAP4410 that the laptop gets IP but smart phone /tablet doesn't connect stack when getting an IP with static IP the devices connected


So what i did ,I went to the market and buy a new AP NOT Cisco brand


Cisco devises i lost truest on it

Abdullah Al-Ahmadi
System and Network Eng.

Mar 26, 2011 | Cisco WAP4410N (WAP4410NLA) Pre80211n...

1 Answer

Trednet Access Point keeps dropping Network connection


Trednets are know to do this if you have another wireless component close or next to the device. Do you have any 2.4ghz phones? Cell phones? Other wireless devices? If you have not tried yet, Try switching the channel on the access point. If its not a channel issue, try getting new firmware and test the signal strenth with a wireless sniffer such as Net Stumbler

Jun 14, 2007 | Trendware TEW-450APB (TEW450APB) 802.11b/g...

Not finding what you are looking for?
Cisco Aironet 1131AG 802.11a, 802.11g/b (746320933474) Wireless Access Point Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

brian soufane

Level 3 Expert

693 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...