Question about Vacuums

1 Answer

Dyson DC01 Blocked Hose

Can you please tell me how best to go about unblocking the hose on my DC01. I get good suction normally but when I use the hose it is poor, was previously good so have to assume its blocked.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Unclip the hose and push a garden hosepipe throughit. that will clear any blockedge in the dco1 hose.

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loss of suction in hose


your hose is blocked get some thing long and thin push it done the hose and try and clear it

Dec 17, 2013 | Dyson DC40 Multi floor Upright Vacuum...

1 Answer

My dyson crawls up to me - hose is not relaxed


Hi Colleen,

Due to your DC07's very powerful suction, it's normal to experience a certain amount of resistance when using the hose. But if the hose seems to be pulling back excessively, this indicates you may have a blockage somewhere in the hose, wand or accessories. To check for this, please follow the steps shown in our online Support guide:
http://www.dyson.co.uk/support/dc07/dc07-standard/my-machine-is-not-working/machine-not-sucking-picking-up-as-well-as-usual/how-to-wash-filters/wand-suction

I hope this information is useful. If you would like some further advice from our experts, please give us a call on 0800 298 0298 (UK), 1-866-693-9766 (US), or 1-877-397-6622 (CA).

Best wishes,

Jack
Dyson Online Support
www.dyson.com

Aug 15, 2013 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

My dc01 wand wont pick up


Hi Davina,

I'm sorry to hear you're having difficulty with your DC01. If your machine doesn't seem to be picking up as well as it should be via the hose, there may be a blockage somewhere in the machine. The filters may also need to be washed or replaced.

To check for any blockages, please follow the steps shown in our online Support guide:

http://www.dyson.co.uk/support/dc01/dc01-standard/my-machine-is-not-working/machine-not-sucking-picking-up-as-well-as-usual1/clean-the-shroud
In normal use, the filters should be washed at least once every 3 months, as shown in the video below. Use cold water without detergent, and allow the filters to dry completely somewhere warm for at least 12 hours before replacing them.

This should resolve the issue, but if you'd like any further assistance or advice, please give us a call on 0800 298 0298. Our Helpline is available from 7am until 10pm, 7 days a week, and calls are free from UK landlines.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Apr 30, 2012 | Dyson DC07 Bagless Upright Cyclonic Vacuum

2 Answers

No suction in the hose on dyson dc24


Hi its Darran at Dyson.

It sounds as though the hose is blocked. I would recommend following the blockage procedure. If this does not resolve the problem, please call our Helpline on 0800 298 0298, between the hours of 7am - 10pm, 7 days a week.

Kind regards
Darran
Dyson Customer Service

Mar 04, 2010 | Dyson Ball DC24 Bagless Upright Vacuum

1 Answer

Dyson hose does not produce alot of suction when extended.


Hi its Darran at Dyson.

It sounds as though the wand/hose is blocked. with the machine locked in the upright positino, remove the hose from the machine, switch on and test the suction. If the suction is poor, remove the wand from the hose and test the suction from the top of the hose. If the suction is strong, you will need to check the wand for a blockage. If the suction is still poor, check the hose for a blockage.

You may find it useful to wash the filter as this can sometimes cause a drop in performance if its dirty and it wuold be more noticable from the hose.

I hope that this information is useful to you.

Kind regards
Darran
Dyson Customer Service

Feb 19, 2010 | Dyson DC14 Animal Bagless Upright Cyclonic...

1 Answer

A Dyson dc 17 Animal and the wand/hose has lost suction


Hi its Darran at Dyson.

From your description of the problem, it sounds as though the wand/hose is blocked. To check this, remove the wand/hose assembly from the machine, switch it on and test the suction from the top of the wand with your hand. If the suction is poor, remove the wand from the hose and test the suction from the top of the hose. If its good here, then you know that the wand handle is blocked.

For the full diagnostics, check out the Support section on our website at www.dyson.com or call our Helpline on 1866MYDYSON.

Kind regards
Darran
Dyson Customer Service

Jan 30, 2010 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

I just bought a used Dyson DC07. Works good but


Hi its Darran at Dyson.

From your description of the problem, it sounds as though the wand/hose is blocked. To test this, please remove the wand from the machine and switch on, testing the suction from the top of the wand handle. If the suction is poor, remove the wand from the hose and test the suction from the top of the hose. If its strong from the hose itself, the wand is blocked and you will need to clear this.

If there is poor suction from the hose, you can remove this by unclipping it from the base of the machine and can then remove any blockages. It is also worth checking the hose for any splits or holes.

If you need any further help or advice, please visit our website at www.dyson.com and check out our support section.

Kind regards
Darran
Dyson Customer Service

Jan 30, 2010 | Dyson DC07 Animal Bagless Upright Cyclonic...

2 Answers

No suction on wand of Dyson DC14 Animal


Hi its Darran at Dyson.

It sounds as though the wand handle is blocked. To check this, remove the wand/hose from the machine as if you were going to use it to vacuum the stairs. Switch the machine on and test the suction at the top of the wand handle with your hand. If the suction from the wand is poor, remove the wand from the hose and test the suction again from the top of the hose. If the suction here is good, then you know the wand handle is blocked. If the suction is poor at the hose, you can remove the hose from the machine and clear any blockages here.

For the full blockage procedure please visit the support section on our website at www.dyson.com.

Kind regards

Darran
Dyson customer Service

Jan 10, 2010 | Dyson DC14 Animal Bagless Upright Cyclonic...

2 Answers

My DC05 Dyson suction has stopped...there are no blockages, the seals are good, there seems to be more suction coming from a yellow box which is situated at the top of the removable cannister. There is...


My Dyson had exactly the same problem. I found the problem was caused by a blockage in the hose. Take the hose out where it joins the cleaner (it will come out if you pull it downwards gently) and take the hose out of the handle by squeezing the yellow buttons on either side. I pushed a rubber alkathene pipe down and found a piece of plastic was blocking it even though at first I was sure it wasn't blocked.

Jan 11, 2009 | Dyson DC05 Cylinder Bagless Canister...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

593 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...