Question about Televison & Video

2 Answers

We have sound but no picture on Phillips flatscreen television

Picture was lost yesterday so turned it off. Put it back on and still black screen but when pressed 1 on remote pictre returned again but only briefly. No picture since then despite able to change channels and maintain sound with the remote.

Posted by on

  • LX Jiang
    LX Jiang May 11, 2010

    Please provide the TV Maker & Model Name.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 356 Answers

Take a flashlight and shine it on the screen when you have sound, look very close, can you see a video image? If so the inverter is probably bad.
Let me know and I will assist further.
lone99star

Posted on Jan 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What is behind the top left part of the screen? something hit my tv there and still have sound but picture just has some lines going down the left side and a white spot where it made impact. What part do i need to fix it?

Posted on Jul 28, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sanyo LED tv model DP58D33. It turns on and functions perfectly for awhile, then screen goes black but still has sound.


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 09, 2017 | Sanyo Televison & Video

2 Answers

I have a rca model led65g55r120q tv flickers and no sound


Check all cables for loose connection, try another input for picture (DVD, BLu-Ray, etc). If none of the other inputs work then it's a panel problem (display) If one or more of the others work then it's a problem with either the tuner or the signal.

Jan 02, 2017 | RCA Televison & Video

1 Answer

Replaced convergence on toshiba 42HDX82...put back together now no picture or sound...could i have rehooked up wires wrong?


YES YOU COULLD HAVE WRONGLY HOOKED UP THE WIRES AND TANGLED THEM UP WHICH IS CAUSING THIS TO HAPPEN BECAUSE ITS CAUSING THE THE VOLTAGE THE TO ENTER AND CAUSING THIS TO HAPPEN

Nov 30, 2016 | Toshiba 42HDX82 42" Rear Projection...

2 Answers

I have sound but no picture on my tv


This is a popular question. Most of the time you either need to make sure all connections are not loose or just need to turn off your tv and receiver and unplug. Wait for 1 minute then reboot.
I recommend this short video as it walks you through some diagnostics for other possible problems.
Repair TV With Sound But No Picture

Nov 24, 2015 | Luxor Televison & Video

1 Answer

I have checked cables and different methods of connecting, but the white and red audio out of my PVR appear to have stopped putting out sound.


Go through the setup of the PVR and check the sound settings. It sounds like it's only producing digital audio, that's why it works with HDMI but you want analog, so set the audio to stereo, or try every setting to see what works!

Jan 19, 2015 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

853 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69845 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6393 Answers

yadayada
yadayada

Level 3 Expert

64034 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...