Looking for cord to connect main unit to 2nd screen.
I have the duraband dual system and the cord that attaches the base and 2nd screen together broke. All the little prongs came off of the cable where u plug into main screen. Can I purchase another cord somewhere.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Start by checking from the fuse to the player. if this seems right there could be a possible failure of the flexible cord that moves along with the panel . Normally this get cut and the fault come on without any notice. you will need to detach the set and test the continuity of the cord from the main unit to the panel. If not Also check for loading motor drive, drive ic. orr faultor dry/loose connections in the main board. remove carefully to test one by one. Helpful? Good day
check on the main wiring harness you wil see a black box on the yellow wire. open up the cover. there is a 10 amp mini fuse inside. if it is blown replace the fuse. also check your main radio and accesssory fuses in your fuse box. if no fuses are blown check all wiring connections.