Question about Computers & Internet

2 Answers

I need to find the drivers for a tyan thunder k8w (s2895). please let me know where i can find them to download. thanx

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 20 Answers

Most motherboard manufacturers have the drivers on the website. I did a little research and found the driver page for your board. If this was any help, please click FIXYA, and thank you for choosing FIXYA :)

http://www.tyan.com/support_download_drivers.aspx?model=S.S2895

Posted on Jan 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

Http://www.tyan.com/support_download_drivers.aspx?model=S.S2895

Hope this helps

Give me a message if you need any assistance


-Blazamane

Posted on Jan 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My motherboard will boot but CMOS will not hold the settings


Hi,
This problem is usually caused by a dead or damaged CMOS battery which is a flat, chrome battery about 2 thirds of an inch in diameter and located on the motherboard.
The battery powers the memory which stores your CMOS settings and devices installed such as hard drives.
Replacing this battery should solve your problem.

Best wishes,
Graeme

Apr 16, 2012 | Tyan Thunder K8W S2885ANRF Motherboard

1 Answer

I am thingking of getting a Thunder K8WE (S2895)


Hi!

Of course it can run Windows Xp 32 bit. The computer specification is much higher for the operating system to run and there can be no problem for it.

About the hard drive, it depends upon it RPM (Rotate Per Minute) and it's data access time. I think SATA drive is good to use.

Hope it helps..

Thank you for reaching Fixya.

Please leave comments for further assistance.

Apr 04, 2010 | Tyan Thunder K8WE Motherboard

1 Answer

I have a 1997 Subaru Legacy Outback Wagon and im having a problem with it overheating. I changed the thermostat 3 times...replaced the radiator...and still overheats. I took the thermostat out of car and...


sounds like a bad water pump, if have thermostat out allready, remove cap start engine look inside rev engine see water move rapidly if not water pump bad, sure is problem

Feb 04, 2010 | Tyan Thunder K8W S2885 Motherboard

1 Answer

Tyan S2885 mb and graphics card Asus AH 4650


install agp drivers, ide drivers then video drivers

Feb 04, 2010 | Tyan Thunder K8W S2885 Motherboard

1 Answer

Please help. i need to download audio and video drivers for a tyan thunder k8w (s2895). where can i find them?


HI


CLICK THE LINK:-

http://www.tyan.com/support_download_drivers.aspx?model=S.S2895

ENJOY


RATE ME DEAR



HAVE A GOOD DAY





Jan 07, 2009 | Tyan Thunder K8WE Motherboard

1 Answer

Manual to tyan s239001


Hi,

Try This link to Tyan Archive Files.
http://www.tyan.com/archive/support/html/manuals.html
I think your board will be here.
Trinity KT Manual under Socket 462/A ( AMD Athlon/MP/Duron )

Mike @ Compurepair.

Mar 12, 2008 | Tyan Thunder n6650W Motherboard

1 Answer

Tyan motherboard


No replacement is available, and none is needed, the RAM should work without it. Just make sure you push in the RAM all the way, so it's properly seated; usually, the clip will pop into the notch on its own, when its fully seated. If the RAM isn't in all the way, the computer wont recognize it, or may not boot up. There's a few exceptions, when the clip is needed to hold the RAM down, e.g. in laptops and certain server motherboards, where the RAM folds in against the motherboard.

Oct 01, 2007 | Tyan Thunder K8W (S2885) (S2885ANRFKIT2)...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...