Question about Ulead Videostudio 8 for PC
I need to input composite video as a webcam into a Flash .swf. as part of a year long project underway. The flash program works great with any USB webcam, EasyCap works in windows Movie Maker and Ulead's incl. program, but won't work with the Flash! Flash's setup "sees" the easyCap, but won't make the green light come on, thus no video. ..
To make things even more bizarre, if I open the .swf in Internet explorer, it works!! Problem is, it needs to be embedded inside another flash that's a projector (exe) or at least in FlashPlayer. The browser can't be used.
If anyone even has an inkling of what the problem/protocol/whatever might be, I'd be forever grateful
SOURCE: EasyCap Video Capture
I had the same problem. No picture and no sound.
Here is what I did to solve it.
1. I Un-installed the software and restarted the computer.
2. Placed the installation CD (that came with the product) back in the CD drive.
3. Click on "Install Driver" (this only installs the USB 2 drivers so that the computer can see the device)
Make sure you do not attach the Easycap Device before you have installed the USB Driver (as above).
4. Once USB Driver has been installed then plug in the Easycap USB Device, windows should then detect the new device, to make sure:-
5. Right Click "My Computer" "Properties" "Hardware" "Device Manager" check "Imaging Device" (which is where my STK1150 Driver was installed) and make sure it has no yellow exclamation mark next to it.
6. Go back to CD and "install the Uplead Software", you then have to Restart the computer.
Once all installed you can then connect your external device VHS Player/Camcorder etc to the Easycap device, using the Red/Yellow/White leads.
I like many before me, tried and I tried to get the image to play on the software "Capture" screen but all to no avail, I was pulling my hair out, I wasted two days on it, I finally decided that this product was a total load of rubbish and I had wasted my money and it had to go.
Then a major break through, some smarty pants made the comment about INPUTS & OUTPUTS, my prayers along with many others could have been answered ??....
I had actually plugged the Red/Yellow/White leads into the INPUT terminals of the external VHS Player, when they should be plugged into the OUTPUT terminals of the external VHS Player/Camcorder.
On a Camcorder the RED/Yellow/White terminals are usually Output terminals but on a VHS Player they are usually always Input only !!....
I tried running my Camcorder through the software and Hey Presto that worked a treat.
So in order to get my VHS to play through the software I ended up having to buy a Scart OUT (very important "OUT") Red/Yellow/White adapter (see link for product image)
Once all connected I pressed play on the VHS Player and I have to say that nearly fell off my chair "IT WORKED - IT WORKED - IT WORKED"
Posted on Feb 16, 2008
Ok, here is what is going on. The default video setting in control panel> scanners and cameras> syntek 1160 is pal-b it should be NTSC_M. Right click on the Syntek 1160 and click Video Decoder Property. Change it to NTSC_M from Pal. Do this with the unit plugged in or it wont be displayed in the Scanners/Cameras options box. Right away the signal line should rear 1 from 0 with video hooked up. Keeping that setting to stay is my issue right now. I was so excited to figure it out, I had to post. I was about ready to throw the unit away. Its a program driver error. Hope this helps!!!
Posted on May 20, 2009
Tips for a great answer:
Jun 14, 2012 | DekCell EasyCap USB 20 Video Capture...
on Jul 09, 2010 | Computers & Internet
on Jun 24, 2010 | Computers & Internet
Oct 11, 2009 | iView Multimedia Website Pros Netobjects...
on Jun 17, 2010 | Computers & Internet
on Jan 14, 2010 | Computers & Internet
Oct 21, 2007 | Macromedia Flash MX
1,129 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: