Question about Computers & Internet

1 Answer

Consent.exe deleted without notice

I was surfing the net on my computer and got an update and I tryed to install it but it needed administrator permission but it said the file was not found and I went into system32 and looked Consent.exe and I couldn't find and now I can run anything.

Posted by on

  • forrestkelle Jan 07, 2009

    Well I tried that and it failed to restore and there are no other restore points.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

I assume you have Vista. This is indeed supposed to be in the folder you specified. If this file is missing, other may be too. If you have the Vista Installation CD or DVD, boot with it. You be prompted with a repair option that allows you to either perform a system restore to an earlier, and hopefully intact point by date, or you can run a repair install that will restore the operation and file but may lead to some loss of personal information and necessitate re-installation of some programs. Try the System Restore first.

Remember you must boot the CD/DVD to get this.

Good Luck!

Posted on Jan 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yahoo chat box blank




*lights cigarette*



You may need to register vbscript.dll and jscript.dll


Follow the instructions below:


1.Run cmd.exe with administrator privileges (Start > type 'cmd' then right click on cmd.exe and select Run as Administrator, then click Continue when prompted by the elevation consent dialogue box). This will open a command prompt in c:\windows\system32


2.Type cd..


3.Type "cd SysWOW64" (Without The Quotes) press Enter


4. Type "regsvr32 vbscript.dll" (Without The Quotes) press Enter


You should now get a message that says: "DllRegisterServer in vbscript.dll succeeded."


5. Type "regsvr32 jscript.dll" (Without The Quotes) press Enter


You should now get a message that says: "DllRegisterServer in jscript.dll succeeded."


Restart Your Computer.


Now try running Yahoo!



Regards,

Tamim


Jul 21, 2012 | Yahoo Messenger

Tip

How to Delete Windows administrator Password without any software


Normal 0 7.8 磅 0 2 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:普通表格; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;}

I have done a research of losing Windows administrator password and find out more than 50% who have set password on their pc will finally forget it,espercially those women,add password to prevent their kids from downloading any games.


There are many reasons account for this.No mather how,when you realize you have forgotten password,you may try everthing you could do as there are many works waitting for you.No doubt, many ways can help you remove or recover the lost password, But here,I will show you how to delete Windows administrator password without any software.


Method 1


Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.


Method 2


Step 1. Put your hard disk of your computer in any other pc .

Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ).

Step 3. Then open that drive in which the victim's window(or your window) is installed.

Step 4. Go to location windows->system32->config

Step 5. And delete SAM.exe and SAM.log

Step 6. Now remove hard disk and put in your computer.

Step 7. And boot your computer


Method 3


Start system and press F8 key when Windows is starting up. Then select Safe Mode with Command Prompt and enter. Choose Administrator,the default password may be blank if you don't set the default administrator password before.Then you will enter into doc Command as following.


Type " net user net user xxx 12345 /add " (xxx is the locked accout name and 123456 is the new password set on this account).Then you will see the Command Completed Successfully.


Try these three method if you do not want to download a program to recover windows password. The preconditions is you should understand and be familiar with the operations


However,if you want to gain access to your pc in emergency,I still suggest you login to another PC which can link to internet and download a windows password recovery software to help.


on Sep 16, 2010 | Computers & Internet

2 Answers

What is jucheck.exe? It keeps trying to acess my computer. I select NO and it pops back up.


The jucheck.exe is the Java update verification process. This process will check on the internet for available updates for the Java software installed on your computer. If updates are available, it will notify you and/or manage the download and install of the updates. You should leave this process running in order to keep your Java up to date.

When there is a notification for new update, a tooltip ballon appears.

java_update01.jpg

To install new update click the notification window.

Note: If you are on Windows Vista or Windows 7 operating systems, then you will see User Access Control (UAC) consent prompt.
The consent prompt is seen when a user attempts to perform a task that requires a user administrative access.

consent-prompt.jpg

Click Continue button to install new Java update.

Jul 30, 2011 | Computers & Internet

1 Answer

My pc is not loading updates


Suggestions:
How do I reset the Windows Update settings?
http://support.microsoft.com/kb/971058
Register Windows Update engine files
http://support.microsoft.com/kb/326253
Rename the software distribution folder
1. Stop the Windows Update service (make sure you are logged on as an Administrator)

Start button || Control Panel ||System and Maintenance ||Administrative Tools
Double-click Services
(Provide the Administrator password or confirmation if prompted to do so.)
Right-click the Windows Update service and click Stop.

2. Click Start, type %windir% in the Start Search box, and then press ENTER.

Locate and rename the SoftwareDistribution folder.

3. Start the Windows Update service

Start button || Control Panel ||System and Maintenance ||Administrative Tools
Double-click Services
(Provide the Administrator password or confirmation if prompted to do so.)
Right-click the Windows Update service and click Start.

Important: Restart the computer, and then run Windows Update again.
Renaming the software distribution folder will erase your history on the Windows Update Site. Anytime you wish to check what updates are installed you can: -
Start button || Control Panel || Programs
Under Programs and Features - click View installed updates.

Rename the Catroot2 folder

1. Click Start, type cmd in the Start Search box, right-click cmd.exe, and then click Run as administrator.
2. At the command prompt, type the following commands, and then press ENTER after each line:


net stop cryptsvc
ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
exit


3. Delete all tmp*.cat files from the following folder:


%systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}


If no files that start with “tmp” exist in this folder, do not remove any other files. The .cat files in this folder are necessary for installing hotfixes and service packs.

Important: Do not rename the Catroot folder. The Catroot2 folder is automatically recreated by Windows, but the Catroot folder is not recreated if the Catroot folder is renamed.

Reregister DLL files that are associated with Cryptographic Services
Reference: http://support.microsoft.com/kb/822798

Click Start, type cmd in the Start Search box, right-click cmd.exe, and then click Run as administrator.
At the command prompt, type the following commands, and press ENTER after each command:
regsvr32 /u softpub.dll
regsvr32 /u wintrust.dll
regsvr32 /u initpki.dll
regsvr32 /u dssenh.dll
regsvr32 /u rsaenh.dll
regsvr32 /u gpkcsp.dll
regsvr32 /u sccbase.dll
regsvr32 /u slbcsp.dll
regsvr32 /u mssip32.dll
regsvr32 /u cryptdlg.dll
regsvr32 softpub.dll
regsvr32 wintrust.dll
regsvr32 initpki.dll
regsvr32 dssenh.dll
regsvr32 rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 sccbase.dll
regsvr32 slbcsp.dll
regsvr32 mssip32.dll
regsvr32 cryptdlg.dll
exit

Note: Click OK if you are prompted.

Restart the computer.

Re-Install “Windows Update Agent”.

Download and install the latest version of “Windows Update Agent ” on your computer.

How to obtain the latest version of the Windows Update Agent to help manage updates on a computer
http://support.microsoft.com/kb/949104
Information for network administrators about how to obtain the latest Windows Update Agent
http://support.microsoft.com/kb/946928

To reinstall Windows Update Agent - download the relevant file for your system and save it to a drive where Vista is not loaded because the file cannot be launched directly from the system root directory.
Click Start, click Run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without quotations) and then press Enter to install the Windows Update engine.

Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/wuforce"
D: is the drive where Windows is not installed (ie a flash drive or a 2nd hard drive etc)
How to troubleshoot a problem by performing a clean boot in Windows Vista:
http://support.microsoft.com/kb/929135

May 15, 2010 | Microsoft Windows Vista Ultimate Edition

1 Answer

Can not install Net Framewoek 3.0 because of


Sir,

Run the cleanup tool to clean out temporary files, run the .NET
Framework cleanup tool, Run the installation file, then reboot and try to install it again and see if it works. If not try the below following steps....

Step One:
1. Go to Add or Remove Programs, try to remove all .NET Framework.
2. Please download and install the Windows Installer Cleanup utility
from this link:
http://download.microsoft.com/downlo...BD/msicuu2.exe
3. Then, please run it from Start-> All Programs-> Windows Install
Clean Up.
4. Please remove all Microsoft .NET Framework shown there and click
Remove.
Step Two:
1. Click Start->Run, type INSTALLER and click OK.
2. In the open folder, click View menu and select Details.
3. Right-click the Date Modified column header.
4. Click Comments
5. In the Comments column, locate the cached Windows Installer file
that displays Microsoft .NET Framework 1.1 (English) RTL x86 enu.
6. Right-click the cached Windows Installer file and then click
Uninstall.
7. Close the window.
8. Delete the cached Windows Installer file.
Step Three:
1. Restart your computer.
2. While your computer is booting up, press F8 to invoke the startup
menu.
3. In the startup menu, choose Safe Mode.
4. Log on as an administrator.
Note: In Safe Mode, your system display and Desktop will look and
perform differently than in Normal Mode. This is only temporary.
5. Delete the folder C:\WINDOWS\Microsoft.NET
6. Delete the folder C:\WINDOWS\system32\URTTemp
7. In the C:\Windows\System32 folder, locate the file mscoree.dll.
Right click and rename it to mscoree.old
Step Four:
1. Click Start->Run, type REGEDIT and click OK.
2. Navigate to the following registry key by expanding the "+" beside
the registry tree in the left pane:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework
3. Delete this key in the left pane.
4. Repeat steps 2-3 to delete the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup
5. Restart your computer to Normal Mode
Step Five:
1. Please download the Microsoft .NET Framework Version 1.1
Redistributable Package from the following link and save it to C:
http://www.microsoft.com/downloads/d...DisplayLang=en
2. Click Start->Run, type "c:\dotnetfx.exe /C" (without quotation marks
and there is a space in this command) in the open box and click OK.
3. Click Run, and type "C:\.NET Framework 1.1" (without quotation
marks) in the open box click OK
Note: If you are prompted to create this folder, please click Yes to
continue.
4. Locate the folder C:\.NET Framework 1.1 and double click the file
netfx.msi in it to install .NET Framework components.
If .NET Framework 1.1 can be successfully installed, we can go on to
install .NET Framework 1.1 Service Pack 1:
Microsoft .NET Framework 1.1 Service Pack 1
http://www.microsoft.com/downloads/d...DisplayLang=en
Step Six:
If the above two can be installed correctly, please download KB886903
from the following link and install again:
http://www.microsoft.com/downloads/d...displaylang=en
If the problem still exists, please describe the error message when
installing Microsoft .Net Framework Service Pack in further detail


Thanks
Good luck

Nov 07, 2009 | Microsoft Computers & Internet

1 Answer

Vista error codes 643 and 646


Hi there,

the error codes that you have mention is related to windows update of Microsoft .net framework.

To troubleshoot this issue, I suggest we first perform these steps:

Step 1: Download Microsoft Windows Installer CleanUp utility
====================================
1. Visit:
http://download.microsoft.com/downlo...BD/msicuu2.exe
2. Save the file to your computer.
3. Right click "msicuu2.exe", click "Run as administrator" and follow the
wizard to install this tool on your computer.

Step 2: Remove .NET Framework
========================
1. Click Start ->All Programs->Windows Installer Clean Up, click Allow.
2. See if you can find .Net Framework software. If so, remove them.

After that, please restart the computer and perform the following
suggestions to reinstall .NET framework 1.1 and the updates for it.

Step 3: Install .NET Framework 1.1 Redistributable Package and related updates
==================================================
1. Please download the Microsoft .NET Framework Version 1.1 Redistributable
Package from the following link and save it to the C drive (C:\)

1) Microsoft .NET Framework Version 1.1 Redistributable Package

http://download.microsoft.com/downlo...6/dotnetfx.exe

2) Microsoft .NET Framework 1.1 Service Pack 1

http://download.microsoft.com/downlo...867460-X86.exe

3) Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1
(KB928366)

http://www.download.windowsupdate.co...d81a178b15.exe

4) .NET Framework 1.1 Service Pack 1 SYSTEM.WEB.DLL and MSCOREE.DLL Security
Update for Windows Vista (KB929729)

http://download.microsoft.com/downlo...929729-X86.exe

Please follow the steps above and if still problem persist please lets us know

Regards,

Om

Oct 20, 2009 | Computers & Internet

1 Answer

Consent UI for administrative applications has stopped working


Consent.exe is part of Windows Vista UAC (user access control). If you are having problems, try going back to a restore point and see if you can add/remove programs. If you don't have a restore point where you can do that, then you will have to use the recovery CD which will require the admin password. If you didn't set a password, it could be blank, just try pressing Enter.

Aug 31, 2009 | Microsoft Windows Vista Home Basic Edition...

1 Answer

Access violation at address 0052D602


Sorry If this doesnt help your problem but here is some info that might help


"
Consent.exe is part of Windows Vista - it's the User Access Control (UAC) executable.

There is a known malware version of this executable. Do a search on your hard drive (within Windows Vista, obviously) for all consent.exe files - make sure you include hidden and system files in the search criteria.

Once the search has completed, right-click on each file and check the file properties.

There is a MalWare version of Consent.exe
Right Click ALL of the ones you find and look for
Microsoft details in Properties

  • File Names Used: 3
  • Paths Used: 8
  • Common File Name: CONSENT.EXE
  • Common Path: ?:\windows.old\windows\winsxs\x86_microsoft-windows-lua_31bf3856ad364e35_6.0.5728.16387_none_ef1113b929fe5371\
  • Vendor Information: Microsoft Corporation
  • Product Information: Consent UI for administrative applications
  • Version Information: 6.0.5728.16387
  • CONSENT.EXE may use 3 or more path and file names, these are the most common:
  • 1 :%windir%\winsxs\backup\X86_MICROSOFT-WINDOWS-LUA_31....A1C2
  • 2 :?:\windows.old\windows\winsxs\backup\X86_MICROSOFT-WINDOWS-LUA_31....A1C2
  • 3 :?:\X86_MICROSOFT-WINDOWS-LUA_31....A1C2

  • If you find a consent.exe anywhere else in the search results, I'd delete that file. Run a thorough anti-virus scan of the harddrive. I'd also download spybot and run it as well as downloading Ad-Aware from Lavasoft and using it to scan as well.

    Spybot and Ad-Aware can find different spyware/malware, which is why I recommend running both products.

    Once you've done all that, reboot the system. That should fix the problem.

    Jun 22, 2009 | Microsoft Windows XP Professional With...

    1 Answer

    PunkBuster problem.


    Try uninstalling Punkbuster completly, make sure its deleted from program files as well, then try installing it again see if this helps.

    Jun 15, 2009 | Video Game Consoles & Games

    1 Answer

    Consent ui for administrative applications has stopped working


    Consent.exe is part of Windows Vista - it's the User Access Control (UAC) executable.

    There is a known malware version of this executable. Do a search on your hard drive (within Windows Vista, obviously) for all consent.exe files - make sure you include hidden and system files in the search criteria.

    Once the search has completed, right-click on each file and check the file properties.

    There is a MalWare version of Consent.exe
    Right Click ALL of the ones you find and look for
    Microsoft details in Properties

  • File Names Used: 3
  • Paths Used: 8
  • Common File Name: CONSENT.EXE
  • Common Path: ?:\windows.old\windows\winsxs\x86_microsoft-windows-lua_31bf3856ad364e35_6.0.5728.16387_none_ef1113b929fe5371\
  • Vendor Information: Microsoft Corporation
  • Product Information: Consent UI for administrative applications
  • Version Information: 6.0.5728.16387
  • CONSENT.EXE may use 3 or more path and file names, these are the most common:
  • 1 :%windir%\winsxs\backup\X86_MICROSOFT-WINDOWS-LUA_31....A1C2
  • 2 :?:\windows.old\windows\winsxs\backup\X86_MICROSOFT-WINDOWS-LUA_31....A1C2
  • 3 :?:\X86_MICROSOFT-WINDOWS-LUA_31....A1C2

  • If you find a consent.exe anywhere else in the search results, I'd delete that file. Run a thorough anti-virus scan of the harddrive. I'd also download spybot and run it as well as downloading Ad-Aware from Lavasoft and using it to scan as well.

    Spybot and Ad-Aware can find different spyware/malware, which is why I recommend running both products.

    Once you've done all that, reboot the system. That should fix the problem.

    May 08, 2008 | Computers & Internet

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    79 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Computers & Internet Experts

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    kakima

    Level 3 Expert

    100387 Answers

    David Payne
    David Payne

    Level 3 Expert

    14160 Answers

    Are you a Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...