Question about Spectroniq PLTV-42HW68 42 in. LCD TV
The remote power the tv on and off. The tv powers on with the name of the tv comes across the screen (spectroniq) and then disappears and the screen turns blue. the tv has no sound. what is wrong with this tv.
This is the best solution for your problem as a 40 year experience with wires etc. Go to the source of your cable signal connector . Open it and clean the terminals with emery paper , sand the end of the cable shiny clean from corrosion , get a new barrel connectors with gold terminals if possible lengthen the ends of the cable , insert and tighten good, use thick rg-16 or rg 40 cable with good insulation ends crimped professionally with a crimpier or buy ready made , not from dollar store. Get a gold plated professional splitter if you need one or two , it will cost about 15 or more each . Make the cable runs as short as possible, using the thick good cables. If needed get a signal magnifier. From radio shack or the source etc. Connect them good and tight . Ground the splitters . Problem solved , you will get crystal clear channel 2 to 7 including 3 and 4 . Isolate the TV cable from other cables and power wires. Vitally
Posted on Apr 15, 2010
Tips for a great answer:
Apr 15, 2016 | Spectroniq Flat Panel Televisions
Jul 26, 2014 | Spectroniq PLTV3250 32 in. LCD TV
Dec 05, 2013 | Spectroniq Protron PLTV-32 32 in. Plasma...
Aug 29, 2013 | Spectroniq PLTV-42HW68 42 in. LCD TV
May 18, 2011 | Astar SpectronIQ STV378 37 in. LCD TV
Sep 30, 2010 | Protron PLTV3250 32 in. LCD Television
Aug 10, 2010 | Spectroniq Flat Panel Televisions
Feb 25, 2009 | Spectroniq PLTV3250 32 in. LCD TV
Jan 04, 2009 | Spectroniq PLTV-42HW68 42 in. LCD TV
109 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: