Question about Epson Stylus RX650 All-In-One Printer

1 Answer

Resetting Epson RX 650 refilled ink cartridge?

How can I get my RX 650 to reset the print cartridge after refilling or can I turn off the function in the printer?

Posted by on

  • 3 more comments 
  • butters69 Jan 07, 2009

    Where do I get the "Extracted File" that you tell me to run the adjprog.exe from?

  • butters69 Jan 07, 2009

    Okay, I've done this but I'm still none the wiser as to what it is I have to do, I think I need a bit more information.

  • butters69 Jan 12, 2009

    Where is the extracted folder?

  • butters69 Jan 13, 2009

    Okay, I downloaded the program to C:\download and then ran the .exe file but I was not asked to "extract" any file. All that appeared in my download folder was the Icon with wrar380 under it, no extracted folder.

  • butters69 Jan 16, 2009

    Hello again. Well I have finally been able to get to the extracted file after the fog had cleared from my brain. Thanks for all your help and sorry to have made it so hard for you.
    Cheers.
    Paul


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 837 Answers

Posted on Jan 07, 2009

  • 3 more comments 
  • Jay Glendenning
    Jay Glendenning Jan 07, 2009

    I apologize you also need this

    download WinRAR 3.80 and install


  • Jay Glendenning
    Jay Glendenning Jan 07, 2009


    1. Switch on printer

    2. Set your computer date setting to february 13 2007

    3. Run adjprog.exe from the extracted folder

    4. Click accept

    5. Click particular adjustment mode

    6. Go to maintenance then Select waste ink pad counter then click ok

    7. Click on “check button till its done then click on initialization button then click on finish button

    8. Switch off printer for 5 secs then switch on again

    9. After you reset successfully, you can change the date back to normal


  • Jay Glendenning
    Jay Glendenning Jan 12, 2009

    When you extract the downloaded program it shows you where it is going to extract . I don't know where you extracted it to .. but try extracting the file and when it asks for the location, it will show a location that it wants to out it in. Change that to C:\download. Then after it extracts the adjprog.exe file will be in C:|download

  • Jay Glendenning
    Jay Glendenning Jan 13, 2009

    Ok ..

    Now go here

    And be sure to click the 'Download Resetter Printer Epson RX650' link on the page.

    When you extract the downloaded program it shows you where it is going
    to extract . I don't know where you extracted it to .. but try
    extracting the file and when it asks for the location, it will show a
    location that it wants to out it in. Change that to C:\download. Then after it extracts the adjprog.exe file will be in C:|download

    Be sure to then follow the instructions of setting your system date etc


  • Jay Glendenning
    Jay Glendenning Jan 16, 2009

    Thats ok .. I enjoy being able to help .. Sometimes us "tech" guys aren't exactly clear on what we are trying to do when we are assisting .. but believe me . .we really want to see you through your problem.

    Thanks for using FixYa .. and if you need us .. we are here

    Crayz


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset my Epson T200XL ink cartridges?


Resetting the Epson Ink Cartridge Chip With Software A freeware program called SSC Service Utility enables users to download and install software that helps to manage their Epson printer. The software offers several functions, one of which is resetting the ink cartridge chip. Other settings allow users to freeze the internal ink counters or to reset the internal ink counters. It supports over 100 Epson printer models, but some printers may not respond to the commands from the software.
Using a Cartridge Reset Tool A cartridge reset tool is a small plastic piece that fits against the cartridge. The contacts on the reset tool correspond to the contacts on the printer's ink cartridge. When connected to the ink cartridge, the cartridge reset tool indicates the resetting of the ink cartridge with a green LED light. The reset tool is beneficial not just for resetting the chip, but also for allowing the printer to use all of the ink in the cartridge.

Troubleshooting Issues With the Reset Tool

Buyers should be sure to check the description for each reset tool carefully to determine whether they can reset their Epson printer cartridge with the tool. If the wrong cartridge is attempted or the reset tool is simply unable to reset the cartridge, users see either a red LED light or no light at all. In some cases, they simply cannot reset the chip any further. Before disposing of a reset tool, always test it on multiple ink cartridges.

Apr 07, 2016 | Epson Printers & Copiers

5 Answers

My Epson NX415 does not recognize refilled and reset cartridges. What can I do about it?


Don't let your ink levels drop below 25% before refilling and resetting your cartridges. There is an inner and an outer chip on these cartridges. The inner chip disables the outer chip when it's contacts are no longer bathed in ink. So, it doesn't matter if you "reset" the outer chip after refilling your empty cartridge because the chip was disabled. I'm really curious how you refilled these cartridges yourself without souring yourself on refilling from the experience. I own a Cartridge World ink refilling store and I refilled a set of these cartridges when we had replacement chips available (we don't now because our chip distributor was violating Epson patents) and it was an absolute mess, took forever, and the cartridges still didn't work in our test printer.

Feb 13, 2010 | Epson Stylus NX400 InkJet Printer

1 Answer

My NX400 doesn't print. I changed original 69 type cartidges with bought on ebay self-resetting 88 type.Printer did resetting but doesn't want to print, actually prints but without ink, copies without ink....


Do not use Resetter.......

ALL…. Epson & Brother Requires Genuine Epson Cartridges. !!!!!!!!
That sounds like your problem.

In Purchasing Epson's CX 5400, CX4600, & CX7400 and more, I found out that Epson does not like Generic Printer Cartridges. I also Purchased a Brother. That also does not like Generic Print Cartridges. Color that should be Yellow, will turn out Green, Blue Brown, etc.

These printers have a CHIP that will detect if it is Generic or Genuine. When they see it’s Generic Cartridges, it will print lines thru the words, stripes across the picture and also do a mix match with the colors. It also will not let you print anything, if only one of the cartridges is empty.

I wanted to print only Black, and would not let me, because I did not have any ink in one of my cyan cartridges. Go figure.

That's what these Companies do., so they can keep selling the ink cartridges. Some Printers, are able to use Generic, and some are refillable. Some you can refill them up yourself and I heard, quite MESSY.

So I learned, thru trial and error, that you must use the ORIGINAL Genuine Cartridges for these PRINTERS. Some people say some models work fine compatible, but not mine.......


I had to replace the printer, but Epson, Lexmark & Brothers are always on sale. My Brother & Epson cost me $50.00 with Rebate. .

This is the only advice I can give you. If you find this helpful, pls rate me.

Thanks and Good Luck :0)

Feb 07, 2010 | Epson Stylus NX400 InkJet Printer

1 Answer

Printer ink cartridges contain ink but printer says not!


The chip on the cartridge tells the printer how much ink is left in the cartridge. If the chip says the cartridge is empty, it won't print no matter how much ink is left. That said I think you got refills that didn't get the chips reset or compatibles (non-Epson brand cartridge body) with poorly made chips that expired before they should have. You need to have all the cartridges installed with functioning chips to use your printer. You need to buy new cartridges of the ones your printer thinks are empty. I recommend Cartridge World for refills because they make a quality product that doesn't have these kind of "novice" refiller problems. I would never buy refills or compatibles off the internet because you get what you pay for.

Oct 26, 2009 | Epson Stylus DX4200 All-In-One InkJet...

1 Answer

How do i go about refilling epson T5591/2/3/4/5/6


Before you can have unlimited refilling you must need this devices:

Option 1: The chip resetter which you will need to manually reset the cartridge before refilling to enable the printer to recognize a new cartridge.

Heres the link where you can buy the resetter:
http://cgi.ebay.ph/CHIP-RESETTER-For-EPSON-T5591-T077120-T078120-T0791-INK_W0QQitemZ290276640766QQcmdZViewItemQQptZBI_Toner?hash=item4395d607fe




Option 2: You a new set of empty cartridges with autoreset chips in it. No manual resetting needed, what you need is to refill and monitor the ink level.

Explanation: When the printer detected that the cartridge is empty, the printer sends data to the cartridges and the cartridge understand what the printer says, then the cartridge automatic chip resetter will re trigger the logic circuit built in into it to reset into full ink level.

Here is the link of the autoreset chip what Im taking about:

http://www.made-in-china.com/image/2f0j00wCVtjAmMPlchM/Refill-Cartridge-with-Auto-Reset-Chip-Canon-520-501-.jpg

Oct 21, 2009 | Printers & Copiers

1 Answer

I bought some refillable ink cartridges for my epson rx 595 printer. I have the ink to refill them, but do not know how. is there any instructions you can help with, or suggest a site that can help. thanks...


You can't refill Epson cartridges unless you have a microchip resetting tool.

The process is messy and you take a chance on flooding your printer if you get it wrong.

Why not buy affordable ink cartridges brand new and ready to use. They are called compatible cartridges because the are not made by Epson but they are for Epson printers, manufactured by other reputable companies and replicated by chemists to get the ink quality just right for the printer model they are intended for.

Don't believe the frightening stories you hear about compatible cartridges, believe me if you are going to refill cartridges using a refill kit, it has GENERIC ink in it and this is so it works on all printers and so it is not specific to yours and will give poor results.

You don't have to buy our ink, feel free to search the NET and find a retailer of your choosing, but don't use refill kits for your own sake.

I hope this helps

Nigel
The INK Store
http://www.the-inkstore.co.uk

Jan 17, 2009 | Epson RX595 Photo All-In-One Printer

2 Answers

Canon pixma refill is not recognized


Dear nedaa,
You need to deactivate ink level detection function to keep your printer working after refilling the cartridge. Click here to know more how to deactivate ink level detection function.
Source:
Canon Inkjet Printer Forum
Canon Manual & Tools Dowload

Jan 17, 2009 | Epson Stylus 2200 InkJet Photo Printer

1 Answer

Epsom stylus CX4700 won't print - new ink cartridges installed


They cut costs on Epson compatible cartridges by using low quality ink and chips or not resetting the chips at all. Sounds like you got cartridges that the chips were not reset on so your printer thinks all the cartridges are empty. I own a Cartridge World ink refilling store and I would never recommend purchasing compatible Epson cartridges from anyone. I would buy refills of Epson brand cartridges and make sure the seller reset the chips.

Oct 18, 2008 | Epson Premium Compatible** Inkjet...

1 Answer

Epson RX-500 ink's full but won't print


u just have to replace the refilled cartridges.and insert new orignal cartridges.this is a very common problem in epson printers that refilled cartridges work sometimes and sometimes dont.so insert new orignal cartridges to have good printouts.

Sep 09, 2008 | Epson Stylus RX580 InkJet Photo Printer

1 Answer

Epson stylus cx4800 won't print


Hi, reason we sell epson printers are they are the cheapest to run, but they do get alot of problems with the print heads, if you change from using refill ink kits to compatible ink cartridges you would not have to reset the chip each time, otherwise you will have to change to a more expensive to run printer like the HP, or Lexmark, lexmark is the most expensive for cartridges but it has the print heads built into the cartridge and not the printer itsself, epson only have the chip on the cartridge.
You can use the refill kits on most HP & Lexmark without having to reset the cartridge all you need to do is refill it.
but for every 3 for example you may have to buy a new cartridge which will be more expensive, ie if you get lines through your print, as the print head will probably get blocked on cartrdige.

Happy New Year

John

Dec 10, 2007 | Epson Stylus CX4800 All-In-One InkJet...

Not finding what you are looking for?
Epson Stylus RX650 All-In-One Printer Logo

Related Topics:

860 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...