Question about Indesit 24 in. D63S Free-standing Dishwasher

2 Answers

Inlet hose on dishwasher too short

I have a lg dishwasher and the inlet hose does not reach the tap can I length or connect to another hose (use two hoses).

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

Yes you can add to the hose. Just make sure there are no leaks.

Posted on Jan 07, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Yes you can connect another hose.There are connectors available on retails stores to make sure there is no leak.

Posted on Jan 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to lengthen the water supply hoses. There to short to reach sink.


Buy a flexible braided hose for mains pressure. They come in different lengths.

Fit one end to the water outlet tap and for the other end you will need a fitting you can attach the dishwasher hose to that any plumbing supply has. I don't think you can buy a flexible braided hose that will fit to your water supply tap on one end and then straight to the end of the dishwasher hose on the other. You will need the adapter between the 2 to hook the fittings up. Use plumbers tape on the fittings when installing them for a good water seal.

Or you can just get a plumber in who will fit everything up for you and will also probably use a flexible hose to plumb in the water supply.

Jan 04, 2016 | Dishwashers

Tip

I get error IE on my LG dishwasher.


IE is inlet error, displayed when "Not reached to the normal water level in spite of 10 min. water supply"

Possible cause:

  • The Water Supply Tap is closed.
  • The Water Supply is shut off.
  • The Inlet Hose is kinked.
  • The Water Pressure is very low.(below 10 psi)
  • Inlet Valve is OK?
  • The filter of Inlet Valve is clogged by impure water.
  • The Hall sensor is OK?
  • The Impeller of Air Guide is bound.
Remedy:

  • Cut power by tripping circuit breaker or unplugging power cable for ten minutes.
  • Take action on Water Supply device.
  • Measure the electric resistance of Inlet Valve. (950-1300 )
  • Clean the filter of Inlet Valve.
  • Check the frequency of Inlet Water by the Test Mode.
  • Replace the Air Braker.

on Jan 31, 2009 | LG 24 in. LDS 5811 Built-in Dishwasher

1 Answer

LG LD2131SH Dishwasher displays a ie error


Hi santjiesfras,

The error code your receiving is an "Inlet Error" message. This means that no water is going into the Dishwasher. Please check the following:

1) Is the tap open.
2) Is the inlet hose kinked?
3) Is your water pressure fine? Because anything less than 0.3kgf/cm(bar) is not going to work

If all of the above is fine, then take off the inlet hose of the dishwasher, and clean the filter which is between the hose and machine (small circular filter). If still not working, then you will need to replace the inlet valve. I would suggest getting a L.G service agent to do so.

Good Luck :-) - J.Q

* If you found this solution helpful, please vote positively. A 4 four thumbs up will do nicely too :-)

Apr 13, 2011 | Dishwashers

1 Answer

1e error appears after start


It is an inlet error. Normal water level is not reached after 10 minutes.Check the following:
  1. The Water Supply Tap is closed.
  2. The Water Supply is shut off.
  3. The Inlet Hose is kinked.
  4. The Water Pressure is very low. (below 10 psi)
  5. The filter of Inlet Valve is clogged by impure water.
  6. The Hall sensor is OK.
  7. The Impeller of Air Guide is bound
Remedy:
  1. Take action on Water Supply device.
  2. Measure the electric resistance of Inlet Valve. (950-1300 ohms)
  3. Clean the filter of Inlet Valve.

Oct 20, 2009 | LG 24 in. LDF 7811 Stainless Steel...

1 Answer

I have an error code of 1E on my LG dishwasher what does this mean and how do I fix it?


1E error is Not reached to the normal water level in spite of 10 min. water supply
POSSIBLE CAUSE REMEDY FOR ERROR OCCURRENCE The Water Supply Tap is closed. The Water Supply is shut off. The Inlet Hose is kinked. The Water Pressure is very low. (below 10 psi) Inlet Valve is OK? The filter of Inlet Valve is clogged by impure water. The Hall sensor is OK? The Impeller of Air Guide is bound.
Remedy Take action on Water Supply device. Measure the electric resistance of Inlet Valve. (950-1300 ) Clean the filter of Inlet Valve. Check the frequency of Inlet Water by the Test Mode. Replace the Air Braker.

Sep 26, 2009 | LG Dishwashers

1 Answer

Keeps alarmimg 1E on my Lg Dishwasher


Inlet water error 1E
Not reached to the normal water level in spite of 10 min. water supply
The Water Supply Tap is closed. The Water Supply is shut off. The Inlet Hose is kinked. The Water Pressure is very low. (below 10 psi) Inlet Valve is OK? The filter of Inlet Valve is clogged by impure water. The Hall sensor is OK? The Impeller of Air Guide is bound.
Take action on Water Supply device. Measure the electric resistance of Inlet Valve. (950-1300 ) Clean the filter of Inlet Valve. Check the frequency of Inlet Water by the Test Mode. Replace the Air Braker.

Sep 24, 2009 | LG Dishwashers

1 Answer

IE problem


IE is inlet error, displayed when "Not reached to the normal water level in spite of 10 min. water supply"

Possible cause:

  • The Water Supply Tap is closed.
  • The Water Supply is shut off.
  • The Inlet Hose is kinked.
  • The Water Pressure is very low.(below 10 psi)
  • Inlet Valve is OK?
  • The filter of Inlet Valve is clogged by impure water.
  • The Hall sensor is OK?
  • The Impeller of Air Guide is bound.
Remedy:

  • Cut power by tripping circuit breaker or unplugging power cable for ten minutes.
  • Take action on Water Supply device.
  • Measure the electric resistance of Inlet Valve. (950-1300 )
  • Clean the filter of Inlet Valve.
  • Check the frequency of Inlet Water by the Test Mode.
  • Replace the Air Braker.

Dec 23, 2008 | LG LDF8812 Stainless Steel Built-in...

1 Answer

LG Dishwasher ie error code problem


IE is inlet error, displayed when "Not reached to the normal water level in spite of 10 min. water supply"

Possible cause:

  • The Water Supply Tap is closed.
  • The Water Supply is shut off.
  • The Inlet Hose is kinked.
  • The Water Pressure is very low.(below 10 psi)
  • Inlet Valve is OK?
  • The filter of Inlet Valve is clogged by impure water.
  • The Hall sensor is OK?
  • The Impeller of Air Guide is bound.
Remedy:

  • Cut power by tripping circuit breaker or unplugging power cable for ten minutes.
  • Take action on Water Supply device.
  • Measure the electric resistance of Inlet Valve. (950-1300 )
  • Clean the filter of Inlet Valve.
  • Check the frequency of Inlet Water by the Test Mode.
  • Replace the Air Braker.

Oct 31, 2008 | LG 24 in. LDS 5811 Built-in Dishwasher

1 Answer

LG Dishwasher (LDS5811) - low water level


1E= Inlet Error
Condition>>>
Not reached to the normal
water level in spite
of 10 min. water supply


The Water Supply Tap is closed.
The Water Supply is shut off.
The Inlet Hose is kinked.
The Water Pressure is very low.
(below 10 psi)
Inlet Valve is OK?
The filter of Inlet Valve is clogged
by impure water.
The Hall sensor is OK?
The Impeller of Air Guide is bound

Solutions:

Take action on Water Supply
device.
Measure the electric resistance of
Inlet Valve. (950-1300 )
Clean the filter of Inlet Valve.
Check the frequency of Inlet Water
by the Test Mode.
Replace the Air Braker

Aug 20, 2008 | LG 24 in. LDS 5811 Built-in Dishwasher

1 Answer

LG 3 in 1 Dishwasher model LD2131SH


E1=Water inlet Error

Not reached to the normal
water level in spite
of 10 min. water supply

Causes:

The Water Supply Tap is closed.
The Water Supply is shut off.
The Inlet Hose is kinked.
The Water Pressure is very low.
(below 10 psi)
Inlet Valve is OK?
The filter of Inlet Valve is clogged
by impure water.
The Hall sensor is OK?
The Impeller of Air Guide is bound

Solutions:
Take action on Water Supply
device.
Measure the electric resistance of
Inlet Valve. (950-1300 )
Clean the filter of Inlet Valve.
Check the frequency of Inlet Water
by the Test Mode.
Replace the Air Braker.

Aug 14, 2008 | LG 24 in. LDS 5811 Built-in Dishwasher

Not finding what you are looking for?
Indesit 24 in. D63S Free-standing Dishwasher Logo

Related Topics:

606 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Dishwashers Experts

noel
noel

Level 3 Expert

4740 Answers

Ted Maxwell

Level 3 Expert

3516 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

12047 Answers

Are you an Indesit Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...