Question about Kenwood KDC-MP4028 CD Player

1 Answer

I cant get the rear speakers to play on my pioneer deh-p3000ib.

If i press certain buttons I get nothing but bass coming from those rear speakers.

Posted by on

  • tskrhak Jan 10, 2009

    I fixed my own problem. I disconnected the power wire to the radio and the radio reset to factory settings and the rear speakers worked.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Sounds like you have
1) the rear speaker cable is plugged into the wrong colored hole
2) the audio software thinks you have a subwoofer, but you don't? Check on the audio software for ways to configure the speakers, the latest chips auto-detect when you plug in a cable, and ask you what that was you plugged in.

Posted on Jan 07, 2009

  • Hans Schulze Jan 07, 2009

    never mind, i didn't see that this was for kenwood system.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer deh-15ub usb port will not play iphone


Pioneer deh 15 ub does not have intial setup option and my music plays bass and hardly and vocals at a low state.I need it to say rear rear

Dec 23, 2012 | Car Audio Receivers

1 Answer

Cant access the fade controls. Rear speakers are not operable without it.


When the rear output setting is "rear s/p:SW", you cannot adjust the front rear spreaker balance. Go to the rear speaker output from function and select "rear sp/full".







Aug 19, 2012 | Pioneer DEH-P7600MP CD Player

1 Answer

Cant set the clock on my pioneer deh-P3000IB deck


According with the P3000IB User Guide...

zjlimited_1242.jpg

Hope helps (remember to rate this answer).

May 13, 2011 | Car Audio Receivers

1 Answer

Pioneer- ipod doesnt have bass


Hi there,

On the EQ on the ipod turn it to bass boost if not try a new cable

Feb 12, 2010 | Pioneer DEH-P7600MP CD Player

2 Answers

Wiring Diagram for Pioneer DEH-P3000IB


red -Acc power
yellow -12 memory power
black -ground
blue -amplifier remote
blue/white -power antenna
SPEAKERS
white left front +
white/black left front -
grey right front +
grey/black right front -
green left rear +
green/black left rear
purple right rear +
purple/black right rear -

Aug 29, 2009 | Car Audio Receivers

1 Answer

It sounds like the bass is up all the way


That sounds like your speakers are hooked up to the Rear channel, and you've enable the FIE (Front Image Enhancement) feature.

Press the Audio button (top right corner) until FIE is displayed, then press the down arrow (bottom, right side) to turn FIE off

See page 13 and 14 of the user's manual:
http://www.pioneerusa.com/pio/pe/vgn/images/portal/cit_11221/50136operation_manual_DEH-1500_2002124142426930.pdf

Mar 15, 2009 | Pioneer DEH-1500 CD Player

1 Answer

Big bass


hi there
you hit a button marked SW press this button again and subs will turn on its the first button located next to number 6 on your unit
hope i was able to solve your problem

Feb 24, 2009 | Pioneer DEH-P2900MP CD Receiver...

1 Answer

Pioneer deh 5800mp receiver


Bass and treble settings are adhusted only when u r in custom setting of equilizer mod.in any predifned mode u cant change the bass and treble settings.

Dec 30, 2008 | Pioneer DEH-P5800MP CD Player

2 Answers

Pioneer DEH-P3000IB problem.


I know this is an old post but just ran into the same problem with my brother in laws Pioneer Radio. Well, it turns out that the head unit has to be OFF before you try to change the subwoofer setting. THen press and use the Multi-Control knob to select SubControl and change this to REAR SP: FULL (this gives you full range sound) or REAR SP:SUB W (this is for only low, subwoofer frequencies). His radio was set to sub, which is dumb because it was installed with a 4 channel amp and 4 full range speakers. Not sure why it was setup like this in the first place but oh well...

Aug 24, 2008 | Car Audio Receivers

Not finding what you are looking for?
Kenwood KDC-MP4028 CD Player Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...