Question about Microsoft Xbox 360 Controller

1 Answer

Two broken wireless controllers to make one good?

Hey, how's it going. I have one wireless xbox 360 controller with a
broken and unresponding left joystick (the actual joystick socket is broke). It happens! I also have a second xbox 360 wireless controller with a broken and unresponding left button (L1). This one was dropped and landed on the left button. My question is how difficult would it be
to remove and migrate parts from one to the other to make one good
working controller?

Thanks for your help?

John

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 79 Answers

Not hard the controllers wireless are all the same. You need a special tool a t8 torq tamper tool go on ebay they have them cheap with that you will be able to swap parts. remember there is one hidden screw in the lower center of the controller under the serial number sticker

Posted on Jan 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My xbox 360 wireless controller will not connect to the console. Batteries are good, no metal or microwave interference, resync has no effect, another controller (new) works as it should. Help! James


Hey James,

Well, you did a lot of good troubleshooting already. Just to double check your work, visit the link below and go over the steps once more.

Click here

After that, if you are still having trouble you may just have a bad controller! I would recommend contacting Xbox support for further help. They may replace the controller free of charge or if you bought it from a store, you could return it due to it being faulty.

The support information can be accessed at the link above.

Regards,
G33k

May 11, 2011 | Microsoft Xbox 360 Controller

1 Answer

Wireless Control


if this for xbox 360 elite or just regular, your wireless controller need a good battery, Once you replace the battery. Connect the wireless controller on your xbox closely and go the sub menu of xbox 360 to check the configuration for wireless.

Jul 23, 2009 | Microsoft Xbox 360 Controller

1 Answer

Mines totally broken the thing fell in half cause the switch thin


the xbox got thrown on the ground hard
Now it Powers on like normal, Gets a good picture/looks like it's going to let me play & then it just stops & goes out. It shows 2 red flashing lights. Please help,

Jun 20, 2009 | Microsoft Xbox 360 Controller

1 Answer

My XBox 360 controller stopped working after i restared my 360.


The wireless receiver in your controller is broken

It is powered on, but cannot find the 360. It's like being blindfolded and asked to sit in a chair over..... there.

Apr 10, 2009 | Microsoft Xbox 360 Wireless Controller

1 Answer

Xbox 360 Wireless Contoller has me running to the left


mine does that too. idk if there is a way 2 fix it, but try returning it.

Jan 16, 2009 | Microsoft Xbox 360 Wireless Controller

1 Answer

Controller


you have to press the connection buttons, one on the controller and one on the xbox 360, the one on the controller is located on top by the triggers next to the cartridge insert port right by the left button, it has 3 wavy lines next to it, when you press it, the controller will light up and go in circles. After that quickly press the button on the xbox 360 located under memory unit A, to the left of the disc eject, then the xbox 360 lights will go in a circle then automatically connect. If it doesnt work at first, try it again, but quicker.

Nov 28, 2008 | Video Game Consoles & Games

1 Answer

Wireless xbox 360 controller


Hey Pete,

Xbox 360 controllers do not have that problem very often and you know what happens to me sometimes. I change the batteries and the controller still doesn't turn on. Turns out the batteries that i replaced had no juice on it. Make sure you are using the right kind of batteries too meaning don't cheap out and use the ones you get at 99c stores or anything like that. Those will work by the way they will not last more two days. Buy new batteries.

Oct 02, 2008 | Microsoft Xbox 360 Controller

1 Answer

Wired controllers for Xbox 360


Hey,

Yes, you can buy wired controllers for the xbox 360. Here is a link
http://www.gamestop.com/product.asp?product%5Fid=802112

Nov 22, 2007 | Video Game Consoles & Games

Not finding what you are looking for?
Microsoft Xbox 360 Controller Logo

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

marley mcelhinney

Level 3 Expert

490 Answers

Tre Elkins

Level 3 Expert

643 Answers

Mike Neath
Mike Neath

Level 3 Expert

315 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...