Question about NorStar Meridian M7310 Phone

1 Answer

Phone won't ring. The arrow will flash but no ring. Meridian 7310

Something is blocking the phones from ringing when a call is coming in. The arrow flashes when a call is coming in but does not ring. The ring tone is set and the volume is up but no ring. the ringer is set and while setting it the phone does ring during the test. the phone was just purchased used and has been like this since plugging in the phone.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

You can try to plug it in at a set that does ring and make sure it wokrs there. The programming should not have changed with the phone but ... anything is possible. If it rings at the other location then it will be the programming for that extension. Also check that it is not in DND do not disturb

Posted on Jan 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phone won't ring and I have checked the ringer switch


If there is a volume switch on your phone then while it is ringing (call the number from a cell or something) and as it is supposed to be ringing. Just hit the right arrow to turrn it up. Hope this helps. P.s. it has to be ringing when you are turning it up

Sep 20, 2011 | Aastra Telecom 9116 Corded Phone

1 Answer

Norstar meridian 7208 won't ring.


Does it ring when you move it to a known ringing port? Is it programmed to ring (Terminals & Sets) Appear and Ring? Do you have Automatic Set Relocation turned on so the extension number stays with the phone?

There are a lot of features to check for ringing, including the volume of the set.

Carl

Sep 10, 2011 | NorStar M7208 Corded Phone

1 Answer

Our company has purchased a Nortel Norstar Meridian M7310 phone system, that has been previously used. We didn't know, but it did not come with voicemail, so it is tough to get calls when I am not here....


Programming2.gif is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear only
press the Chng key til it says appear and ring
press next key (lower right arrow)
The display should say line 002: appear only
press the Chng key till it says appear & ring
Continue til all of your active lines say appear and ring
press the heading key(top left arrow) till the display asks for another extension number
repeat line programming for that extension
press the release key when finished

Aug 30, 2010 | NorStar Meridian M7310 Phone

1 Answer

M7208 phone help


Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you want to change the line appearance on.
Press the show key (top right arrow)
The display should say Line Access.
Press the show key (top right arrow)
The display should say Line Assignment
Press the show key (top right arrow)
The display should ask for a line number
Depending on the version of system the line numbers can be lines 001-004, 025-028, 049-052 or 001-004, 031-034, 061-064.
The easier thing for you to do is to press the list soft key then the next key (bottom right arrow).
this will tell the line order and if the line is assigned to appear & ring or not.
Press the change key to change the status of the line on your set from unassigned to appear& ring on lines 001,002,003,004,and either 005,025 or 031 for line 5.
press the Rls key when finished

Jan 28, 2010 | Nortel Meridian M7208 Corded Phone

1 Answer

On my phone system (M7310) I only want one phone to ring when calls come in. currently 2 ring. how do I turn the other off?


Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear & ring
press the Chng key till it says appear only press next key (lower right arrow)
The display should say line 002: appear & ring
repeat the procedure the same as line 001 for the remaining ringing lines

press the release key when finished

Nov 10, 2009 | NorStar Meridian M7310 Phone

1 Answer

One of the telephones ringer volume has increased substantially to almost unbearable. Which Feature item is that? Greg


While the phone is ringing, press the down directional arrow below the dialpad. You can make the phone ring by pressing feature *80.

Oct 01, 2009 | NorStar Meridian M7310 Phone

1 Answer

How to set up fax number on my 7310 all-in-one.


According to the HP manual for this unit:

1. Verify that your HP all-in-one is set to answer fax calls automatically. (Press the Auto Answer button so the light is on.)
2. Press Setup.
3. Press 5, and then press 1.This displays the Advanced Fax Setup menu and then selects Answer Ring Pattern.
4. Press the down arrow key to highlight an option, and then press OK. When the phone rings with the ring pattern assigned to your fax phone line, the HP all-in-one answers the call and receives the fax.

You can download the manual from HP here if you've misplaced yours and need more setup information.

Apr 03, 2009 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

Doesnt ring


My BT Meridian compact does not ring after it powered down in a thunder storm. The lines flash and can be answered as normal just no ringing sound

Mar 14, 2009 | NorStar M7208 Corded Phone

1 Answer

My phone, a meridian M7208, does not ring incoming calls


following a power failure, the only phone that rings is the one in reception. light still flashes but no ringing from any other phones

Feb 16, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

M7310 phone not ringing audibally


If the internal calls dont ring, then there is something with the extension. When a call is ringing the phone, press the UP VOLUME. Chances are that someone accidentally turned the ringer all the way down.

Let me know if that doesnt work.

Nov 05, 2008 | NorStar Meridian M7310 Phone

Not finding what you are looking for?
NorStar Meridian M7310 Phone Logo

1,561 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

858 Answers

kakima

Level 3 Expert

98792 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...