Question about Teac LT-1 Clock Radio

1 Answer

How do you set the wake up? So the radio turns on automatically? each morning

Hello,I have a Teac LT-1. When I had the user manual, I was able to set it so the radio came on each morning at 5:30 and stay on for thirty minutes and then turn off automatically. Somehow, I turned it off, and can't figure out how to turn it back on. Thanks for any help.

Posted by on

  • debra4health Nov 09, 2008

    I can't even figure out how to set the alarm. Were you ever able to resolve the problem? Thanks for sharing, Debra

  • marilyn384 Nov 29, 2008

    I have the same problem, too. I am looking for my manual, and if I find it, I will post the answer here. If anyone else finds the answer, it would be wonderful if you would post it here, too. Thank you,



    Marilyn

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I did not find my manual, but this worked for me. Set the clock to be a 24 hour clock by pressing and holding the Memory/Clock Adj button. The display will show 24h or 12h. Use the fast forward button to change from 12h to 24h. Press the Memory/Clock Adj button again and use the fast or reverse forward buttons to change the time to read, for example, 13:00 instead of 1:00 if the time is 1pm. Press the Memory/Clock Adj button again to set the minutes.When you are done setting the time, press and hold the Timer/Sleep button. Either a time or "0:00" will appear in the display with the word "TIMER" flashing above it. Quickly press and hold the Memory/Clock Adj button until the first digit in the time starts flashing. Set the hour that you wish the alarm to sound using the fast or reverse forward buttons, just like you do for setting the time. Press the Memory/Clock Adj button again to set the minutes, and one more time to finish. The word "TIMER" will stop flashing and go solid, and the display will return to the time of day. When the alarm sounds, you can hit Snooze which will give you 5 more minutes, or you can turn the Clock Radio off. Pressing the Timer/Sleep button again will turn off the timer (alarm) and pressing and holding it again after that will turn it back on.

Posted on Nov 29, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 83 mother wants me to set time on her Teac 180 alarm clock?


Hello Hellen Barnett

The "time / set" button is the key to success...
(observe & restore the "lock/run" status when finished)

I could not find your SPECIFIC manual...
but I take strength in the knowledge that once
TEAC has a good design they generally stay in that area.

Take a look at the TEAC CRX188R owner's manual below

Location of Controls (Pages 4 & 5)
Teac CRX188R User Manual Page 4

Teac CRX188R User Manual Page 5

Carnac the Magnificent

Apr 02, 2017 | Teac Audio Players & Recorders

1 Answer

Why? Jvc sound bar turning in by itself, no one turned it on, three mornings in a row , turned on radio automatically???


It sounds that you have accidently set up an alarm setting that is set to wake you up in the morning!

Look in the manual and see what it says about timer settings.

Aug 21, 2016 | JVC TH-BA1 Soundbar System with Wireless...

2 Answers

How do I set the alarm on this model, which I cannot find any where. Grateful & puzzled. Model 7-4806A GE Clock Radio


if I could see a good picture of it perhaps I could assist . most have a slide bar to turn the alarm on then you use the hour or minute buttons to set .

Mar 18, 2016 | Audio Players & Recorders

1 Answer

How do i set the alarm on my ihome alarm dock?


Once the time is correct, users can move on to setting the alarm itself. Many iHome systems come with dual alarms allowing couples to set different times for each person or individuals to designate a weekday and weekend alarm. Each alarm has its own time, wake-to source, and frequency. The process of setting the alarm is the same for both options, the only difference is what button, either 1 or 2, users depress when setting it.

Once ready to set an alarm, users need to push and hold the button down, waiting for the alarm time to appear on the clock's display. From there, the up and down arrows or plus and minus buttons adjust the time backwards or forwards accordingly. Once that is complete, users select the frequency of the alarm by pressing the alarm button again and then opting for 7, 5, or 2, which correlates with all week, weekdays, and weekends respectively.

The final part to set is the wake source of the alarm. Users press alarm buttons one more time, and then use the same directional buttons to choose from iPhone and iPad on some models, radio, buzzer, or playlist. If users choose playlist, they must also setup a playlist within their Apple device titled iHome.

Because frequency is part of the alarm setting process, there is no need to turn on the iHome alarm manually as one would do with a normal alarm clock. However, users can check to see if the alarm is active by looking at the screen of the clock for the earliest alarm time, displayed on its lower part.
In the mornings, when the alarm sounds, users have two options: Snooze and disarm. The disarm process turns off the alarm until the next day in its frequency chain. Users disarm the alarm by pressing the power button. On the other hand, users must manually program the snooze button. Users do this by pressing and holding the snooze button and then toggling to the desired snooze time, generally between one and 29 minutes. Once this is set, users simply press the snooze button in the mornings to delay the replay of the alarm for that amount of time.

Jul 18, 2014 | iHome Audio Players & Recorders

1 Answer

Teac model LT-1 how to set clock


To set time on TEAC CD Receiver LT1
Press Memory/Clock Adjust button until numbers flash.
First display is 24/12 for choice. Change with >>> button.
Press Memory/Clock Adjust button again and Hours digit
flashes. Set with >>> or <<<.
Press Memory/Clock Adjust button again and Minute digit
flashes. Set with >>> or <<<
In 12 hour mode "PM" will be displayed

Sep 23, 2012 | Teac LT-1 Clock Radio

1 Answer

How do I set the alarm so it will activate on weekdays. It only works for Saturday and Sunday. Thanks


Hello

Sure Alarm battery Back-Up System

This SmartSet® Clock Radio includes a Sure Alarm battery back-up circuit that can

wake you up even if the power is 'Off'at the selected wake up time. If your power

is 'Off'at the selected wake up time the clock display will be off and the radio will

not operate, but a separate mini-buzzer will turn 'On'automatically to wake you up,

even if you had selected the "Wake to Radio"option.

The Sure Alarm will sound for 30 seconds and then shut off automatically.

To stop the Sure Alarm buzzer immediately, press the RADIO ON/OFF button.

Pressing the SNOOZE button has no effect during Sure Alarm operation.

Note: In order to maximize the life of the built in lithium battery, please be sure

to set the ALARM 1 and ALARM 2 switches to the "OFF"position if the radio

will be disconnected from the AC outlet for more than a few hours. This will
prevent the Sure Alarm from turning 'On'unnecessarily.

1.) Depress and hold either the ALARM 1 or ALARM 2 setting button.

The display will change from the correct time
to the Alarm 1 or Alarm 2 wake up time.

2.) While holding the ALARM 1 or ALARM 2 setting button, depress either the

SET + or - button to move the display ahead or back to your desired wake up
time.

3.) When the desired wake up time appears on the display, release the SET + or

- buttons.

Note: Be sure that you have set the wake up time correctly by observing

the AM indicator. If the AM indicator is 'On'the wake up time is "AM". If the
AM indicator is 'Off', the wake up time is "PM".

4.) When the desired wake up time (AM or PM) appears on the display, release
the ALARM 1 or ALARM 2 setting buttons

Apr 20, 2011 | Emerson Smartset Clock Radio

1 Answer

Set alarm clock


goto http://voxrightnow.custhelp.com/app/answers/detail/a_id/12057/~/operating-the-rca-rp4803-clock-radio
or follow instruction
  1. Press the SET button until WAKE 1 / WAKE 2 icon is blinking.
  2. Press REV or FWD to set the wake time. The time decrements or increments will follow by a faster rate when you press and hold either REV or FWD.
  3. After the WAKE time is set, press SET repeatedly until no icon is blinking.

Tips:

  • The unit equips with GRADU- WAKE feature, the alarm tone volume will increase gradually to its maximum in about 30 to 45 seconds.
  • If you set the SLEEP function with low volume level before going to bed, we advise using WAKE mode to wake you up since its volume will automatically increase.

Waking by Selected Source: You may be woken up by WAKE, RADIO or CD.

  1. Select an AM or FM station.
  2. Set wake time (see above directions).
  3. Press WAKE 1 or WAKE 2 to select waking up by WAKE, RADIO or CD. Corresponding indicator will be shown next to the selected setting.
  4. Adjust the volume by turning VOL.

You can select your CD wake track by the following procedures:

  1. Make sure you have inserted a CD.
  2. While holding WAKE UP CD TRACK, press REV or FWD to select your desired CD wake up track.

Mar 18, 2011 | RCA RP4803 Clock Radio

2 Answers

How do you set the alarm and clock?


Setting Clock

1. Slide the switch /WAKE1/WAKE2/

on the top of the unit to clock position.

2. Press REV or FWD to set the clock

time. The time decrements or increments

will follow by a faster rate when you press

and hold the buttons. The ":" between

hour and minute time flashes when you

are setting the time. AM or PM icon will

also beside the time.

3. Slide the switch /WAKE1/WAKE2/

on the top of the unit to position

when finished.


Setting Wake Time

This unit allows two wake times to be set.

1. Slide the switch /WAKE1/WAKE2/

on the top of the unit to WAKE 1 or

WAKE 2 position.

2. Press REV or FWD to set the

respective wake time. The time

decrements or increments will follow

by a faster rate when you press and

hold the buttons. The ":" between

hour and minute time flashes when

you are setting the time.

3. Slide the switch /WAKE1/WAKE2/

on the top of the unit to position

when finished.

http://audiovox2.info/docs/common/RP5430/RP5430_OM.pdf

Mar 15, 2011 | RCA RP5430 Clock Radio

1 Answer

Alarm clock won't change time with daylight savings


unless it is an automatic , atomic clock none I have ever owned do the change automatically

Feb 27, 2017 | RCA Audio Players & Recorders

Not finding what you are looking for?
Teac LT-1 Clock Radio Logo

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5515 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Teac Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...