Question about Whirlpool RBS275PD Electric Single Oven

1 Answer

I have a wirlpool oven thats thirty years old model rde1330081

Does it have changeble ellements in it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 262 Answers

Yes the elements are changeable .if you look in the rear of the oven where the elements go through the liner you will see screws Turn the power off to the oven after doing so remove the screws on the elements.GENTLY pull the element towards you you will see wires on the end of the element remove them and replace with new element.(SOMETIMES YOU WILL HAVE TO REMOVE BACK PANEL TO GET TO THESE WIRE JUST MAKE SURE POWER IS OFF TO OVEN BEFORE DOING ANY REPAIRS

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need spare part element,any one out there no ?


didnt specify make and model -use your make aand model number to look up replacement part online or an appliance store in your area

Sep 13, 2016 | Ovens

1 Answer

Hi we have an electrolux EOUI000X oven the oven went bang and blew a fuse now the oven fan runs but is not heating up the oven is only just 2 years old could you diagnose tha problem thanks dan


Hi You blew an element , look inside and you will see an element that has a burned spot very easy to repair, first of all was the over working or the broiler ? witch ever one was working when it made the snap is the one that burn out , First unplug the over in the rear pull out the racks so that you can see most ovens have two phillip head screws that hold the element in place , once the scres are removed pull the ellement towards you and you will see two wires , when holding the element remove the two screws fromt he back end of the element and install the new one in the same maner , this is a very easy job here is a web page that sells oven parts and they ship very fast , good luck and email me if needed , Guy       http://www.appliancepartspros.com/

Jul 26, 2011 | Electrolux Ovens

1 Answer

How do I remove my oven door from my stove it is a frigidaire about five years old


Open the door about thirty degrees towards you or a foot or so gap and pull up on it. It should just slide right off the hinges.

May 12, 2011 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Wall oven door hinge springs do not hold the oven door closed. Oven model is PLEB3059FGD


YOu will have to replace the door hinges.The part number you will need is 318024714 should run about thirty dollars for the set.

Dec 14, 2010 | Frigidaire Ovens

1 Answer

Model No MH6150MXQ - 0 Turn table will not


Hello- The motor has a plastic gear on the shaft that turns glass tray. These can crack or slip off the shaft and not engage the slots on tray. Check to see if gear is cracked or stripped. It may just be loose. Anyway, this part is less than 10$, so replace if it's bad. Let me know if this solves the problem. Have more info if needed-  Thanks- Ed

Mar 18, 2010 | Ovens

1 Answer

Are the oven ellement retaining screws secured


If there is no slot for a screwdriver or cross point screwdriver, then, yes, it will be secured from the outside of the oven.
It will mean removing the rear panel, and possibly the top as well.
Hope this helps.

Feb 06, 2010 | Jenn-Air JJW8530C Expressions Collection...

1 Answer

My oven light does not work at all, how to replace


reach inside and unscrew the old bulb and screw in a new 1

Nov 09, 2009 | Ovens

1 Answer

2 year old elect range/oven by wirlpool will not


check your input voltage your probably losing a leg and only have 120volts instead of 240 volts that would cause a reduced heat symptom

Jul 16, 2009 | Ovens

1 Answer

Oven not heating, and tripping .Aeg Electrolux


check your heating ellement

Mar 24, 2009 | Ovens

2 Answers

Oven heating element


Hello rvready
Welcome,


You said, We have an OLD (1950-60) Frigidaire wall oven, model # RBG-94. Bottom heating element has gone out. Oven is still in good shape so we'd like to be able to find an element replacement, but have had no luck finding one.

unfortunately,
I am not able to find this part either.
Anywhere. This oven is to old for parts. But most important is that it is causing you high utility rates!
Today's appliances save you the arm and the leg that such an old oven is costing you.
You have no idea how it is sucking your money out of your pocket!
It is unfortunate, that no one told you about this years ago!
You payed for more than one oven with your utility bill if you had it since it was new. My advice is do not put good money into bad!
Shop for a new one and see your bills go down.
my wife was telling me to replace the air and furnace for 7 years and I said, it's not broken. But it was over 20 years old. She was right, cause the new one saved me $100. a month!
That means I threw away $7000. in 6 years with my old world attitude.
Yes I am old fashion and always fix it!
But after 25 years of marriage. i finally realized she is a good evaluator and I was a fool to not appreciate her gift for all these years! And out tons more money than I told you about!

Hope I saved you some bucks with my real life stories!
Don't tell your wife!!!
Huuum



Oct 17, 2008 | Ovens

Not finding what you are looking for?
Whirlpool RBS275PD Electric Single Oven Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...