Question about Sony KV-27S46 27" TV
Wont turn on Sony-KV27S46 27" TV, Chassis BA-4D, made July 1999. TV Set is dead - no picture, no sound. A relay like click is heard when the power switch is pressed. It clicks again a few seconds later when the relay(?) drops out. Every 6 seconds the red standby light flashes 3 times. Nothing else glows inside set. Looks like a common problem. I would like to fix myself but do not know where to start. I have a Sams Photofact and lots of soldering experience. I would greatly appreciate any help. Larry
Check for an open resistor on the power supply, it is actually a fusible resistor, (white) if open, then check the converter, some sets have two separate and some have it as one. it will be on a heat sink on the power supply. if shorted then check for a shorted horizontal output transistor and repair cold solder joints on the horizintal drive transformer which is the real cause of this problem
Posted on Jan 08, 2009
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 14, 2015 | Sony Televison & Video
Nov 04, 2010 | Sony Grand WEGA KF50WE610 50" Rear...
Jul 21, 2010 | Sony KP-51WS520 51" Rear Projection...
Aug 06, 2009 | Sony Televison & Video
Jul 15, 2009 | Sony FD Trinitron WEGA KV-36XBR800 36" TV
Dec 27, 2008 | Sony KV-32XBR85 TV
Nov 26, 2008 | Sony KP-48S75 48" Rear Projection...
Nov 01, 2008 | Televison & Video
523 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: