I set this up at work, it worked fine for months, then today just stopped. I can't access the router with 192.168.anything, I've tried. I brought it home to see if maybe I could do it here. but no luck. Any suggestions? The Internet light works, and if connectted by cable to a computer, the respective light works, but the computer wont connect to the internet nor the router. I'm lost.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure your router's WAN port is set to dynamic IP. If the light on the front doesn't glow/blink for the WAN port, try a different cable. If a different cable doesn't work it's probably toast. :( This problem appears to be directly linked to the relationship between the WAN port and the modem. Given that the devices can connect to the router, but not internet, it has to be the WAN. Sometimes if the modem goes out it will send too much voltage through to the router and fry the WAN. Had that happen to my parents router. If the above doesn't "fix ya" then try a different router.
Worst case, you might have to put a wireless card in your PC and bridge the modem (wired connection) to the wireless card and broadcast for your wireless devices. At least until you get a new router.
For that you need to configure your router with below method.
Also change channel type to 3 or 6 or 11 then check.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi Then save settings and restart router Then connect cable from internet service provider to WAN port of router and connect ethenet lan cable from computer to lan port of router. . Let me know if you need further assistance. Thanks for using FixYa.
You will need to check the wireless settings of the router is there any computer connected to the router ? If yes then you can open the router set up page on that computer. Router set up page is the page where you can check all the wireless settings of the router. Click here for step by step instructions
More information is needed.
Is the 'WAN' port on the Netgear router connected to anything?
How many friends will come over at the same time?
How many 'LAN' ports are on the Linksys? How many ports are "free" ?
How many 'LAN' ports are on the Netgaear? How many ports are "free" ?
How many "spare" Ethernet cables do you have?
Is your goal to provide computer-to-computer connectivity,
or are you just trying to provide Internet access for everybody?
If you are "downstairs", is the wireless signal from the "upstairs" router strong-enough to provide wireless coverage "downstairs"?
If you are "upstairs", is the wireless signal from the "downstairs" router strong-enough to provide wireless coverage "upstairs"?
Hi, I am having the same problem with the WRT54XG4 but i discovered that if you disconect the internet port of your router and leave the ethernet port conected to your computer. You can access to the router and you can upgraded.