Question about JVC DX-T9 System

Open Question

Tray error When every i press the open tray button or play it just pops up the tray error screen. ¿what happen? or when I put dvd/cd too, appear "Tray error"

Posted by on

5 Suggested Answers

SOURCE: Locked dvd tray.

If you keep the open button pressed in for about five seconds it will say unlocked on the display and be back to normal

Posted on Dec 31, 2006

SOURCE: Lite-On LVC-9016G DVD drawer does not open

My tray was also sticking but I managed to solve the problem. I can also tell you why slapping the unit worked.
The reason that it sticks (at least in my case) is that the magnet which holds the reading head upwards becomes stronger with use. Thus the reading head will not go down to its place and the tray can't slide out. When you slap the unit the magnet lets the reading head fall down and the tray opens.
I solved my problem by taking the dvd recorder apart (taking note of how I dismantled it so as to reassemble afterwards). When disassembled I put some tape (electrical tape as it is a bit thicker) over the magnet. This weakened the strength of the magnet and allowed the tray to open normally. It makes some noise when reading the dvd, but the tray always opens and I can read and burn dvd's once again with no harm done.
Adrian.

Posted on Dec 27, 2007

  • 56 Answers

SOURCE: paper tray full message and not printing

Hi, first press "Menu" button on the printer,then press cursor down" button.When You have on display "status page" Press "enter" twice. printer should print a status page.If print, then everything is okay with printer and You need just to reinstall drivers.

Posted on Dec 27, 2007

  • 1 Answer

SOURCE: DVD Tray will not open

I purchased this unit back in Mid November to make DVD's of my kids old VHS tapes. To date I have probably have made 400 DVD's. Sunday we came home from being gone all day and the unit was locked up. I tried the reset button, unplugged the unit etc to no avail. I unplugged the unit all Sunday night and looked at it again on Monday morning. I was ready to take the unit back to Best Buy and the unit ejected the DVD and has worked for 2 days (Recorded another dozen DVD's). Tonight while reading the paper a message came on my monitor that there was a problem with the disk and instructed me to push the "enter" button which shut the unit off and was suppose to recover the disc. The recorder is now locked up again. A number of 000000's flashes accross the display and the unit constantly cycles off/on. So it is trying to recover but is obviously not being successful. I am going to try the same thing tonight. I am not sure if I have a bad set of blank DVD's. They are Sony -DVD R, same ones I have been using all along. I do remember having this "Error" message when I first started this project and I had to unplug the unit to resolve but it didn't lock up and I haven't had any issues until Sunday. Seems like something in the software is screwed up. It is frustrating that there doesn't seem to be a manual way to eject the disk??!!

Posted on Jan 16, 2008

  • 1 Answer

SOURCE: Locked dvd tray.

with the unit off press and hold the stop button and the eject button.

Posted on Apr 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Artisan 730 keeps ejecting CD/DVD tray?


Possibly the the eject switch is stuck, open the case carefuly check and rectify.

Mar 25, 2015 | Epson PRINTER,ARTISAN 730

3 Answers

How do I open the dvd tray


is there not a small button on the laptop.

Feb 12, 2015 | Acer Computers & Internet

2 Answers

How do I watch a movie?


You should be able to put the DVD in the tray and should automatically recognize it and go into the movie.
What type of media are you trying to watch. PS2's cannot play blu-ray movies.

Mar 09, 2011 | Sony PlayStation 2 (PS2) Console

1 Answer

Unknown disk type


Press 'Disc Menu' and wait for 'no disc' to appear on the screen. Eject the tray by pressing the 'open / close' button on front of the recorder. Enter the following numbers very slowly on the remote control ' 0086000 ' Press ' OK ' button on your remote control. Close the tray by pressing ' open / close ' button on the front of the recorder. You can check this has worked by pressing ' 0009 OK ' on your remote after the tray has closed. A display will pop up on screen showing the Region as 0. This means you should be able to play discs from all Regions. If this doesn't work the first time! try again! Hope this helps!!

Jan 24, 2009 | Philips DVDR3380/05 DVD Recorder

1 Answer

How to make DVP5990/37 Region Free


First I recommend that you upgrade the factory firmware to the latest version. The current version is .31 and available here. Click "I accept" to accept the license agreement and start the download. Open the zip file and burn the file named DVP5990_37.bin to a CD. Put the CD in the DVD player and it will begin the upgrade and open the DVD tray. Remove the CD but leave the DVD tray in the open position. After just under 10 minutes (6-8) the DVD player will report that the update was successful and close the DVD tray. Press the setup button, go to preferences scroll down the choices (past the bottom of the screen) and select reset to default values. The player will reboot.

Next press Setup
select the Preference menu
Press 1,3,8,9,3,1 on the remote control.
Use the up/down arrows to select region "0" which means all regions.

If you ever get a disc that won't play correctly due to a region error, just use the code above to select the correct region for the disc and you will still be able to play it.

Nov 02, 2008 | Philips DVP5990 DVD Player

1 Answer

DVD Tray is locked


Push and hold down the Open/Close button until "UN-LOC" appears on the FL display (or "Disc Tray Unlocked" appears on the TV screen).

Jan 18, 2008 | Sanyo DWM-390 DVD Player

1 Answer

Cd doors don't open and Errors 1 and 4


I had the same problem with my CMT-EP707. I read on this site to try various combinations of turning power off then turning the power back on while holding down either or both of the stop play button and the eject button for the affected CD tray. What seemed to work for me was turning on the power while holding down the eject button for CD tray 2, even though the error referred to CD tray 1.

Jan 02, 2008 | Sony CMT-EP707 CD Shelf System

1 Answer

Tray won't open


What your husband is doing appears to be the right approach. Looks like the CD was not inserted properly and must've gone out of its seating and preveting the door from opening. Just pusing the CD back to position should take care of it.

Jan 02, 2007 | NAD T562 DVD Player

Not finding what you are looking for?
JVC DX-T9 System Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

69795 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you a JVC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...