Iogear gkm541r I have problem with many of its kayboard not work, I think I need the driver

this is a laptop right? if so there maybe a hotkey that switches the keyboard off try looking for some key with a keyboard on it and hold fn while pressing it

First thing try swapping out your keyboard with another; if problem stops you possibly have dirt in the keyboard-needs cleaning or possibly replacement. If problem does not stop and your keyboard is USB try a different USB port to plug in to. If problem still does not stop try a system restore back to a date before this started. If that does not help, try entering safe mode. If problem stops something is loading that is conflicting with the mouse. Enter MSconfig and disable all load entries, reboot and see if problem stops. If it does, enable each entry 1X1 until problem starts again and you found the problem. That should get you started.

I'm just encountering this exact same problem. Did you find a solution? I'm on Windows 7.

http://www.iogear.com/support/dm/driver/GBU211#display

or

http://drivers.softpedia.com/progDownload/IOGear-USB-Adapter-with-Bluetooth-wireless-technology-GBU211-Driver-10-Download-21387.html

here is the manual
http://www.iogear.com/support/manual/GBU211-GBU311%20Manual.pdf

Check out http://www.sevenforums.com/hardware-devices/156598-bluetooth-initial-configuration-will-not-launch.html

finally I found a solution that worked

Click Numlock on the keyboard to enable the number key pads.

The drivers for a 64 bit version of Vista will almost never be the same as the 32 bit version.

IOGEARs website does not list a 64 bit driver for your device.

Hi,

You can download the driver here from IOGEAR.

The direction of the GMFPSU01C will never tell you that you need to create another printer driver. Because, once you install the MFP Utility of this print server, you will have an automatic Copy1 icon of your printer once you successfully, detected the print server and once you successfully connected to the Printer.

Since, the computer is not detected the printer on the network, here are the things that you may do:

1. Make sure that the printer driver is properly installed in the computer. and make sure that the printer is working when directly connected to the computer.

2. If you can't detect the printer, disable your FireWall or any anti-virus program that's running in your computer.

3. Uninstall/reinstall the MFP Utility. If the CD is not working correctly, use the driver from the Website. Here's the link: http://iogear.com/support/dm/driver/GMFPSU01#display

Try putting the mouse and receiver on the same plane.