Question about Radio Communications

4 Answers

Pairing my headset to the PS3

When I start scanning nothing happens my PS3 just freezes like its still scanning

Posted by on

  • 4 more comments 
  • superminim Jan 16, 2009

    my milos-9 will not connect to the ps3, I bought it in spain however does that make a difference? How do i connect it to the ps3 as a wireless headset?

  • SAZZY73 Feb 05, 2009

    I BOUGHT A MADCATZ HEADSET AND THE OS3 JUST KEEPS SCANING NOTHING ELSE HAPPENS

  • toohey_lfc Feb 14, 2009

    When I scan for bluetooth devices on my PS3 it doesn't retrieve anything. It just keeps on scanning until i get fed up waiting so I turn it off.

  • Anonymous Feb 15, 2009

    i have same problem

  • nameetkoli Feb 26, 2009

    unable to pair by samsung model wep210 headset to ps3, it shows its still scanning but no results, once i kepet my ps3 scanning for one hour no responce it keeps scanning as its gone freez

  • Anonymous May 09, 2009

    i have the same problem and it really sux

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Ok people, here is how it is done- Turn off your bluetooth. When it is off, press and hold the main button (power button) until it flashes(keep holding even after it flashes). The light on the device should turn solid blue (instead of flashing) now you can let go of the power button. My device was picked up immediately... after 2 hours of trying to figure it out of course, lol. Hope it works for y'all!

~Live long and prosper ;)

Posted on Mar 04, 2009

  • csper001 Dec 03, 2010

    YOU DA MAN!!!!! Been trying for hours to pair this. Worked within seconds! THANKS

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Have you tried holding down the volume up & down buttons @ the same time. Some headsets need this 2 activate the search function? Then scan with your ps3. Hey presto, it shud find it. Well, it worked 4 me anyway. PSN id. B1GGR4Y

Posted on Feb 24, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Unable to pair by samsung model wep200 headset to ps3, it shows its still scanning but no results, once i kepet my ps3 scanning for one hour no responce it keeps scanning as its gone

Posted on Nov 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Me too, is this problem of the headsets not compatible to the ps3, or just the bluetooth on ps3 doesn't work well.(based on the controller itself were built on bluetooth 2.0)

Posted on Jun 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to use bluetooth


A Bluetooth headset has to be registered, or "paired", with your PS3 before it can be used.

  • Make sure your Bluetooth headset is fully charged before you begin.
  • Check your headset instructions for entering "pairing mode". Activate your headsets' "pairing mode" so it can be recognized by the PS3.
  • On the Cross Media Bar (or XMB) of the PS3 go to the "Settings" tab, then down into "Accessory Settings", then down into "Manage Bluetooth Devices".
  • With your headset in pairing mode, follow the onscreen instructions and let the PS3 scan for your headset. When your headset is found, follow the prompts and enter a pass key (if necessary- the default is usually 0000 for all brands). The pairing should now be complete.

Mar 08, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

I am having trouble pairing my plantronics voyager 520 to my PS3. I turn on the bluetooth headset, and am scanning for bluetooth devices on my PS3, and nothing is coming up.


Hold the power button for 6-10 seconds when ps3 is searching- light will flash red and blue on the headset-- good luck getting it to work in Black Ops though.

Dec 03, 2010 | Plantronics Hama Voyager 520 Bluetooth...

1 Answer

I got my samsung wep200 and I am unable to connect


You must put your headset in pairing mode, prior to making your PS3 search for new devices. To do it, start with your headset turned off. Then, press and hold the MFB (Multi-Function Buttons) for some 8 seconds, until the indicator light is steadily lit in blue. Now, make your PS3 search for new devices. After a little while the WEP200 should show on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros).
By the way, if your headset's user guide happens to be missing, feel free to download it from this location (if this link fails, please, let me know. I will upload it to some file sharing server for you).
Hope you are able to sort your problems out soon.
Regards, Carlos

Jul 23, 2010 | Samsung WEP200 Wireless Headset

1 Answer

My Bluetooth V2.0 with not pair or scan intp my ps3


PS3 supports Bluetooth V2.0, in fact the Playstation branded headset is V2.1. All versions of Bluetooth are backwards compatible. Are you sure that the headset is going into proper pairing mode?

See these tips:

Pairing mode:
http://www.fixya.com/support/r5009033-put_most_bluetooth_headsets_into_pairing

Pairing to PS3:
http://www.fixya.com/support/r5009279-pairing_headset_playstation_3_ps3

May 06, 2010 | Motorola Mobility Bluetooth Hands Free...

6 Answers

I cannot get my Orb bluetooth headset to work. and yes before you say it im not a dohnut i did follow the instructions as they are put out but when scanning for bluetooth devices on my ps3 it scans...


i figured it out!!! you have to do the Scanning firstly then when you are asked to hold down the P button for 5 seconds and it turns RED immediately open the microphone whilst it is still RED and it will work (hopefully) then it will be registered with your ps3! (hopefully)

Good luck :)

Nov 18, 2009 | Video Game Consoles & Games

1 Answer

I can not get my mad catz bluetooth connected to my ps3.... I also do not have the instructions but i do have the pass code


Hello,

A Bluetooth headset has to be registered, or "paired", with your PS3 before it can be used.
  • Make sure your Bluetooth headset is fully charged before you begin.
  • Check your headset instructions for entering "pairing mode". Activate your headsets' "pairing mode" so it can be recognized by the PS3.
  • On the Cross Media Bar (or XMB) of the PS3 go to the "Settings" tab, then down into "Accessory Settings", then down into "Manage Bluetooth Devices".
  • With your headset in pairing mode, follow the onscreen instructions and let the PS3 scan for your headset. When your headset is found, follow the prompts and enter a pass key (if necessary- the default is usually 0000 for all brands). The pairing should now be complete.
Hope this helped.

Nov 18, 2009 | Mad Catz Bluetooth Headset for PS3

2 Answers

How to pair the bluetooth headset to the ps3


Hi,

This is the info i got when i was looking to pair my headset with my PS3.


1. Turn your bluetooth headset on. It should flash on/off every few seconds.

2. Go to Settings > Accessory settings > Manage bluetooth devices.

3. Put the headset in "pairing mode".

4. Start to scan for the device. PS3 should pick it up. It will display the model if successful.

5. Once it's found it hit the options button. Connect the device (pairing mode) A blue icon will pop up.

6. Your headset will stop flashing meaning it has connected successfully.

7. Go back out and click on the audio device settings.

8. Input device > select "your headset". > output device > "your headset".

9. Hit the "connect bluetooth" icon. Then OK.

10. Your headset should now be successfully connected.. start talking into it to see the bar level move up and down to confirm its working.
Hope it helps.

Best Wishes,

Karlos

Jun 28, 2009 | Radio Communications

3 Answers

Connecting bluetooth headset to ps3


You have to do 2 things in order to use a bluetooth headset on your ps3. First you have to pair it with the ps3. To do this you go to your setting and register the bluetooth device. Make sure your bluetooth device is in pairing mode when you do this. On most headsets you can simply hold down the button until the light comes on a solid color. once it is in pairing mode you will have to scan for new devices. Once this is done you should see the headset on the list. Choose it and enter your pairing code. If you have not set one it will most likely be 0000. Once it is it paired you will have to change your audio output and input. Go to audio device settings and change the input and output device to your headset name. Enjoy!

Sep 25, 2007 | Video Game Consoles & Games

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

3,005 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1641 Answers

Brad Brown

Level 3 Expert

15220 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...