Giving me problems, I need help with this and I have all my information in the Virtual Servers port But i press APPLY CHANGES and then i went to Google and searched PORT SCANNER And then i went to one that i TRUST. And scanned my ip and port that i have for my Virtual Server. It says (MY IP) is not currently running on (PORT)  PLEASE HELP!

Hello,
To Recover Data from Virtual Machine, you need third party application which is Virtual Machine Data Recovery Tool. It can quickly identify the problem(s) affecting your media and apply the best suited solution to extract the files and data that you need and get your virtual machine servers back up and running.

To get more information OR Download this software this software from : http://www.softmagnat.com/virtual-machine-data-recovery.html

Bruno
Start your troubleshooting with a clean browser
Download 'ccleaner' and use it daily. Run it through a couple of times,using the factory settings and the 'Run Cleaner' control until 0 bytes are seen to be cleaned following a scan
Run the 'Registry' from the left hand toolbar but 'Save' any changes after opting to 'repair' errors.Never make changes to your Registry without saving the information.
http://www.filehippo.com/download_cclean...

On the sign-in page click Messenger > Connection Preferences - make sure there is nothing untoward in the lower 2 boxes - if incorrect make changes using the drop-box options > OK

Copy this Yahoo secure site URL
https://www.yahoo.com/
Open Yahoo Messenger > Tools > Internet Options > Connection tab > LAN settings > Uncheck everything then check 'Automatically detect settings' and 'Use a proxy server' > Advanced > Paste the address in the secure box and type 5050 in the port box > OK
Sign in.
Hope this helps.

In order to configure this, you need to know:

- The IP address of the computer or device to have the port forwarded to.

- The port numbers to be used and whether these are TCP or UDP ports

(Note: We recommend you use a computer that has a wired connection to the router.)

Setup steps:

1. Open a Web Browser on the computer. Type in http://192.168.2.1
2. In the address bar of the Web Browser type Click Login in the upper right hand corner of the page. The router does not ship with a password, so just click submit.

1. Click on Virtual Servers under Firewall in the menu on the left

1. Enter the following information
2. • In the description box type the letters X,INBOUND PORT - 0&SELECT TYPE BOTH ,PRIVATE IP ADDRESS IS - 192.168.2.15,PRIVATE PORT IS - 65535
3. 
   
4. AND DISABLE FIREWALL
5. 
   

1. Click the Apply Changes button

- First you need to know the IP address of the computer or device to have the port forwarded to.
- Open a Web Browser on the computer. Type in http://192.168.2.1
- In the address bar of the Web Browser type Click Login in the upper right hand corner of the page. - Enter your router password if there is any, if not just click submit.
- Click on Virtual Servers under Firewall in the menu on the left
- Enter the following information:

1. • Click Enabled
   • Type a general description of the application i.e.. Xbox
   • Type the port 3074 for both of the Inbound port fields
   • Select TCP, UDP, or BOTH for the Type.
   • Enter the IP address of the computer you want grant access too.
   • Type the 3074 specified by the program manufacture for both of the Private port fields.

- Click the Apply Changes button

Hi i got your issue

Try with the following steps ....

Step 1:Connect modem>>Router>>Computer

Step 2: Open the browser page and on the address bar type http://192.168.2.1

Step 3: Towards the left column below firewall click on virtual servers

Step 4: It will ask you for the password just leave it blank and hit submit

Step 5: Check whether any ports have been opened

Step 6: If not contact your x-box vendor and get the port numbers and the ip address of the x-box

Step 7: Come back to this page and enter all those numbers and click on apply changes

Step 8: I will give you an example how the numbers has to installed

Step 9: On description type -x-box ..
And on inbound port-enter the port number(as given by the x-box vendor)
And on thye it can be TCP OR UDP OR BOTH
Private is as same as that of the inbound port
Ip address is the ip address of the x-box

Step 10: Open all the port numbers and click on apply changes

Step 11: Towards the left column click on firewall and then disable it click on apply changes

Step 12: Hopefully this will work

If you any issues let me know or contact the 24/7 Belkin technical support 1800-2235546

Thanks .....
With regards....
Priya

*its simple jus get the port number for the ps3 u can get it from ps3 vendor *once u get it login to the router set up page using a computer AS * open any browser type 192.168.2.1 in address bar * on left hand side click on the virtual servers( password -- leave it blank ) * enter the port numbers only for one ip address only for example 192.168.2.10 for all the port numbers. * then apply changes * then go to ps3 assign a static ip address in ps3 for the ip address the one which u opened the ports for (ex 192.168.2.10) * it will definitely work

Hardwire your PS3 to router or connect it wirelessly by scanning from PS3....
Now hardwire your computer to any of the wired ports of the belkin router....
Goto start>run>type "cmd" >type "ipconfig" note down the default gateway address.....usually it ll be 192.168.2.1
now open any web browser and type the default gateway address in the address bar and hit enter.
In the belkin router set up page
Click FIREWALL and disable it....apply changes
click system setting and enable upnp....apply changes
click virtual servers and open the ports for PS3...and enable it...

that all...you are done with it...
you can also enable DMZ....it ll also resolves the issue....

you will need to do the following things
1 : Get the TCP & UDP Ports Required for the game
2 : The IP Address Of the PC

Step 1 : Open RSP by typing 192.168.2.1 on the address bar of internet explorer

Step 2 : On the Left Click on firewall

Step 3 : Leave the password blankand click Submit

Step 4 : Disable the Firewall and click Apply Changes

===============================

If it is Still not Working

On the left hand side under Firewall Click Virtual Servers

Enable the Ports that you need and assign the IP Address of the PC For the Ports and click Apply Changes

I fixed all i had to do is just find out my IPv4 Address
Which i found by searching CMD and then typing in IPCONFIG and press enter.
Then look for your IPv4 address and put that in the private ip address part in Virtual Servers.