Re: fuji s5700,turns on but when going to take pic...
If the camera is beyond economical repair due to moisture, it usually means the insides have been corroded beyond measure. This means that corrosion would be all over the main boards in the camera, in the lens and also in the ribbon cables. It would cost less to buy a replacement off of ebay. Sorry for the bad news.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Great camera, do you suppose that it's turning on but the selection button between the screen and viewfinder has been activated. So you are looking at the rear screen and if fact the display is in the viewfinder? The button I'm referring to is labeled EVF/LCD
that means that you forced some how the lens that goes out and in when zooming or turning of/on. so, check if the lens that goes out and in the camera is perfectly straigh compare to the rest of the camer. if it is the case try to force it with your hand to put it straight.
if that is not the case, it si more serious. the lens inside migh had moved or broken meaning you have to buy a new camera.
dont waste your time fixing it it will cost you the same as a new one.
1. Press central "Menu/OK" button.
2. Press LEFT arrow (the one with the flower/close-up icon).
3. Press DOWN arrow (display reads "SET")
4. Press RIGHT arrow.
5. Press UP arrow until you reach "OPERATION VOLUME".
6. Select preferred loudness level.
Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa ( http://picasa.google.com ).
You're probably going to have to go into manual mode (both focus and exposure) if this is possible with your comera. This will assure there is no delay (whilst the camera tries to figure out the best settings) in the time you press the shutter button and the time the shutter snaps.