Question about Sony FD Trinitron WEGA KV-32FS120 32" TV
No picture or sound,standby light on front panel flashes when t v is plugged in.
Had this problem ages ago with my sony kv-29,cost £45 to have some soldering work done on it because some soldered joints had gone dry(broke) on circuit board.I took it to a sony dealer,but should be able to be done by anyone who specialises in sony repairs.Worth doing as it is a very good tv.
Posted on Jan 08, 2009
NO PICTURE IN SCREEN
Posted on Jan 08, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Standby/Power light of the TV blinks when there is any internal malfunction in
the TV. The self-diagnostic function of the TV will cause the STANDBY light to
blink or flash when the television detects an issue. The number of times the
STANDBY light flashes corresponds to a specific issue.
examples are given below; some of the issues may be resolved without the need
1 blink / 2 blinks / 5 blinks: - This indicates that there may be a power-related problem with your set.
3 blinks: - This indicates that there may be a power-related problem with your set. The set will need to be serviced to allow a technician to determine the specific issue that needs to be repaired. If the power light flashes three times in sequence in a Lamp TV, the lamp cover is not securely attached. Reattach the lamp cover to resolve this issue.
4 blinks: - This indicates that there may be a back light or lamp power problem.
6 blinks: - This indicates that there is some kind of audio problem with your set.
7 blinks: - This indicates that there is a temperature problem with your set. Please check to make sure that the air vents on the sides and back of the set are not blocked or clogged and there is adequate ventilation around the television. We recommend that you check and clean the vents periodically to make sure the set receives adequate air flow. If the problem continues, the set will need to be serviced.
8 blinks: - This indicates that there may be a video-related problem with your set. If the flash sequence is not listed above or the light continues to flash, follow the steps below to perform a power reset:
Try the following steps to check if the issue can be resolved.
Turn off the television.
Unplug the television power cord from the electrical outlet.
Let the television remain without power for 60 seconds.
Plug the power cord back into the electrical outlet.
the television is plugged into a power strip or surge protector, remove it from
the power strip or surge protector and plug it directly into the wall outlet.
If the issue is resolved, the problem is with the power strip or surge
protector and not the television.
the issue continues to occur, service may be required.
for using Fixya.
Feb 04, 2011 | Sony FD Trinitron WEGA KV-32FS100 32" TV
Dec 16, 2010 | Sony FD Trinitron WEGA KV-32FS120 32" TV
Nov 22, 2010 | Sony KV-32S65 32" TV
Nov 21, 2009 | Sony FD Trinitron WEGA KV-27FV300 27" TV
Aug 06, 2009 | Sony KP-53HS10 TV
Jul 15, 2009 | Sony FD Trinitron WEGA KV-36XBR800 36" TV
Jun 02, 2009 | Sony FD Trinitron WEGA KV-36HS500 36" TV
Sep 18, 2008 | Sony KV-24FV12 24" TV
Feb 08, 2008 | Sony FD Trinitron WEGA KV-32HS510 32" TV
116 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: