- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Don't see what kind of tv you have. Look on the remote to see if there is an input or source button. If it is there you must have a remote that works. Sometimes depending on the remote you can take the remote apart and clean and dry with rubbing alcohol and try again
we the same problem, our tv went blue with a blue pad lock in the upper left had corner.. we couldnt figure out how to get it off.. we even went to go and price tvs today... after looking for the tv manual and not being able to locate it, we decided to google jensen tvs and came up with this site... so thanks whom ever you are who said to hold down the display for 5 seconds and our tv was back!! thanks to whom ever u are with the last 2 suggestions!!!
did you check remote like battry, loose nothing is deposited near battry contact etc.
if it is getting on from front board and not from remote then fault is due to remote.
but if does not start from front also then problem is inside tv.
like power supply or horizontal section failure.
please do not forget to check plug & socket.
your system control section has failed due to sudden power failure.
1please check power to system cotrol.
2check tunning &aft ckt in system.
3check memory ic & its section
4check system ic & its section
On some sets you can use the menu button to enter the menu and navigate to the page which shows what input is currently selected and change it there. If your set does not have that option, then you will need the remote to do it. I have found that on some universal remotes, the TV/VCR button switches the inputs on the TV when the remote is in the TV mode. If that button does not work on your remote for your set, and you have tried all possible codes for JVC TVs, then the only way to switch inputs is to invest a few dollars more and get an original remote from JVC or have the set repaired so that the input button on the TV functions again.