Question about Electrolux ICON Designer E30SO75ESS Oven

3 Answers

Electrolux Wall oven E30EW75ESS

I am getting an error on my Oven. I checked out the manual, but the error codes aren't listed. The Error Code is F23 Can anyone help? or does anyone know where there is a list of error codes for my oven or Electrolux in General?

Posted by on

  • 8 more comments 
  • denise2 Feb 25, 2008

    Having a similar problem but the error is F21. I called Electrolux Customer Assistance, & their computers are down for the next 24 hours. The beep was intermittent & it could be used intermittently. Now, it beeps for longs periods of time & then stops & begins again. I can't leave the house because someone will think it's a fire alarm!

  • Anonymous Mar 20, 2008

    F23 Error: Same problem on two year old oven. Tried reboot by turning off power at electrical panel. That did not fix it

  • Anonymous Mar 31, 2008

    Had the same F23 error reading. Reset the breaker, left off for a minute then oven was back to normal.

  • DDWIsconsin Jun 07, 2008

    I am having the same problem - code F23 Oven is 1 1/2 MONTHS OLD!

  • nickkovacs Aug 07, 2008

    3-year old Electrolux Wall Oven with F23 error showing. Rebooted electrical fuse and all was fine afterwards. I too found it disconcerting that error codes are not listed somewhere - even checked the website and there was a lot of sales info but no error codes.

  • Anonymous Aug 15, 2008

    Our broiler element on the bottom oven went out. Then the one on the top oven went out. We replaced both broiler elements, but they still don't work. We've flipped the breaker and that didn't help. I read somewhere to check the fuse, but we have no idea where that is. Can you help us locate the fuse.

  • Anonymous Oct 30, 2008

    F23 Error. Tried turning off power at circuit breaker, waited 1 minute, turned power back on. seems to have solved the problem.. F23 Error seems to occur after power surges or storm outages.

  • madt Nov 01, 2008

    I just had the same problem, after a power interruption.

    Turning off the breaker for a min. then turning back on seems to have solved the problem.


  • Anonymous Nov 28, 2008




    /* Style Definitions */
    {mso-style-name:"Table Normal";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    font-family:"Times New Roman";

    Thank you, thank you, thank you !!!!! I’d just placed my 12 lb stuffed turkey in
    the oven for our T-day, which we have on Friday, when the error code F 23 lit
    up. My first inclination was to turn off
    the circuit breaker and see if it would reset, but my son looked up the error
    message online and found your site, before I did it. It was good to know exactly what the problem
    was. This oven looks beautiful, and has
    a lot of nice features, but is sensitive to power surges, does weird things and
    in general is a real pain, except when it’s actually working. We’ve already replaced it once, under
    warrantee. What a hassle they gave me,
    trying to lose my paperwork, ignore my phonecalls, etc. In the inimitable words of Elmer Fudd, ‘They
    don’t know me too well, do they?’ Let me
    add a word of caution. Do not line the
    bottom of this oven with tin foil, to keep the bottom of the oven clean. It will MELT to the bottom of the oven, then
    vaporize. AND there is no mention of
    this anywhere in the manual (what a surprise), except a caution that fire can
    result from grease collecting on the foil (duh). The manual is almost useless when it comes to
    error messages. My original Electrolux went
    into lockdown, then shifted into self-clean, with 2 glass pans of banana cake
    inside. Sometimes, just a plain old oven
    is best….. Thanks again.

  • Anonymous Mar 12, 2014

    Error code F01 Electrolux oven



3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Same F23. Resetting the beaker seems to fixed it. Thanks to all

Posted on Jun 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After self cleaning my electolux oven won't heat

Posted on Jan 31, 2010

  • debra954
    debra954 Apr 18, 2013

    Every time I use the self cleaning mode the heat is to high on it a it flips the interior saftey switch , you have to pull the oven out and on the top right is a switch you can reset it every time you use self cleaning. I used to have the repair guy reset it every time at $100. each time until I started watching him take 2 minutes, pull the oven out and rest it. I'd like to dump mine in the back lane but I'm afraid no one would take it I purchased a Hamilton beach counter top toaster oven and microwave at least these appliance work and don't break down



I had the same problem. I called Electrolux and they said it is a miscommunication between the panel and the timer. You have to turn off the power (throw the breaker) to the oven and leave it off for one minute. When you turn the power back on the oven should reset itself. If you can't turn the oven on then a service call is needed. My oven came on and I was able to use it after that.

Posted on Sep 27, 2007

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Errorcode f23? WHAT IS WRONG.

The F-code usually relate to the gate closing or locking.

[PDF]SERVICE DATA SHEET 318127067 (1010) Rev. C
1) if the oven controller displays an F15 error code and the ESEC controller ... F23 The controller failed to communicate with the convection fan and oven lights

Aug 17, 2015 | Ovens

1 Answer

Is there a sight to find frigidaire built in oven error codes

Good Afternoon Friend, this is Z. I am happy to assist you!

I understand you are seeking a site that provides a listing of error codes on your Frigidaire oven. This information is very rare to find. Is your oven receiving an error code? If so, may I have the error code and with this information I'll be more than happy to help you narrow down the possibilities of the code. Thank you!

Aug 02, 2014 | Frigidaire Ovens

1 Answer

Oven error code 133 3af3

I had this error after a maintenance man move the oven to install new cabinets. It was difficult to see but one of the power wires has slipped out of the terminal attached to the oven. After attaching and re-crimping the terminal to the power wire the oven functioned normaly. I suggest anyone with this error code check the integrity of all three power wires.

Mar 29, 2013 | GE Profile JTP56 Electric Double Oven

1 Answer

I was cleaning my self cleaning whirlpool accubake oven and a F1 and E7 code appeared. I have just bought my house and the prior owner did not leave any manuals. Help please

Most Whirlpool appliance manuals are available from Whirlpool: . You will need the model number from the oven. This should be located behind the oven storage drawer on the rim. It will usually be on the left for a range and on the right for a wall oven. On rare models the plaque with the model number will be behind the door. If you add a comment with the model number, I'll try to post a direct link to the manual.

Are you sure about the error code? F1 and E7 aren't in my code books. I have an F7 and E1 code that indicates a short between the door switch or latch switch and the chassis or ground. (For double ovens, there are two of the switches for each door. The code doesn't specify which oven has a bad switch.) The F5 E7 error is a door latch that will not unlock. An F3 E7 error indicates that the warming drawer sensor has shorted out.

For the F3 E7 error, simply replace the sensor. For the other two errors, the solution depends on the door lock state. You start by unplugging the oven and checking all the wires and their connectors. See for the complete set of steps. If the wires/connectors are okay, you probably need to replace one of the door switches if the oven door was locked when the error occurred. If it wasn't locked, then you can check the voltage to the various switches and replace any that are bad. If it isn't a switch, then it is the control that has failed and must be replaced.

I hope this helps.

Cindy Wells

Jul 02, 2011 | Ovens

1 Answer

We cleaned my kenmore elite oven. now it won't work. when i try and turn it on i get an F23 error. do you know how to get the oven/stove working again?

Error code F 23 indicates the control detected a problem with the communication link or can be generated as a result of irregularities in the power supply or usage.

  • The error code F23 can often be resolved by removing power to the appliance for a minute and then restoring the power.
  • By unplugging the appliance it allows the control to receive a fresh supply of power. This in turn will clear the controls memory of any irregularities it may have received from the power supply. Once refreshed the error should no longer be displayed.
  1. Unplug the unit or turn the circuit breaker off for 60 seconds.
  2. Restore the power to the appliance by plugging it back in or turning the circuit breaker back on.
  3. Check to see if the error code is still displayed on the range.
  4. Run the appliance in the cycle that initially caused the error or attempt to turn on broiler.
If the error code is displayed, then service is needed. The unit should be inspected by a qualified appliance repair technician.

Should you choose to use Sears, the number to schedule a repair tech is: Sears Repair Department 1-800-469-4663.

Nov 23, 2010 | Kenmore Ovens

1 Answer

We have an Gaggenau eb 290 oven and the error code F23 shows up - what does this mean? how can we fix it?

F23-relay electronics not selecting. There is either a fault with the pcb or a loss of continuity within the ribbon cable. Unfortunately, I think you are going to need an expert to look at this to confirm.
Sorry I cannot be of more assistance but some faults do require a physical check from a professional and cannot always be sorted out from a distance.
All the best.

May 13, 2010 | Gaggenau EB290 Electric Single Oven

1 Answer

Kenmore Elite slide in range model # C790-440732 keeps displaying error code F23 and oven will not work except on broil

I have the same problem with my Kenmore F23 code will not bake but the broil works?? What the heck?

Feb 07, 2010 | Kenmore Ovens

2 Answers

Wall oven error code

Having the same problem.
Has anyone found a solution to this problem?
Thank you

Sep 03, 2008 | Bosch HBL 745 Stainless Steel Electric...

2 Answers

F10 code

actually F-10 was not listed on the error code list,

do you see any other malfunctions in the display???

Mar 12, 2008 | Kenmore 41389 Electric Double Oven

2 Answers

Thermador Built-in oven model cm301

Same issue w/our Thermador CM301. F23 and F24 codes - BSH acts like they have never heard of the problem! Awful service. This should be reported to the Consumer Board.

Feb 19, 2008 | Thermador SC302T Electric Double Oven

Not finding what you are looking for?
Electrolux ICON  Designer E30SO75ESS Oven Logo

Related Topics:

4,506 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Ovens Experts


Level 3 Expert

417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mack Baxter

Level 3 Expert

383 Answers

Are you an Electrolux Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides