I have a sony trinitron wega tv model number KV-32FS120 and I was wondering if it is digital ready or do I need to get a converter box

You need a digital-to-analog converter box to get over the air channels with this TV. The tv only has an NTSC (analog) tuner.

I hope this helps.

Cindy Wells

you have to check you timinig on/off setting.

You will need a digital receiver box to have digital on this television.

This is a Standard Televisions.

Hi, If you have an outside antenna you will need a converter box as this tv has an NTSC tuner which is analog.

The Sony KV-32S120 has an analog tuner. If you use it with an antenna, you'll need a digital converter box. If you're a cable tv subscriber, the cable company will do the conversion and you won't need anything. Here's what Sony says about it...

http://esupport.sony.com/perl/news-item.pl?news_id=256&mdl=KV32FS120

Good question, Mike. I wondered about my fs210 model, too, and I found the answer at a Sony tech-support site.

1. Go to: http://esupport.sony.com/US/perl/select-system.pl?DIRECTOR=DOCS
2. Enter your TV's model number, which, in this case, is: kv-32fs100 (and then click on Continue).
3. At the resulting page, under "Support by Type" in the left margin, click on "News & Alerts."
4. At the next page, click on: 04/02/2008: Critical: Is my Sony® television ready for the Digital TV (DTV) transition?
5. Your TV and mine are analog, but scroll down the page mentioned in #4, above, to see all of your options.

Consumers can determine whether any Sony TV is digital, just by entering the model number and following the steps listed above. ~ Kind regards, Gilda M. (replied 1/23/09)

probably is only adjustment inside the tv or you may need to replace the flyback

Hiii...
I'm not certainly sure how many time the led blinking ?

I hope hear from tou soon...

Thank's

[Vrya]
[email protected]

I have a Zenith universal remote that i want to program to a sony 27 inch Trinitron, what are the codes?