Question about Onkyo TX-SR502 Receiver

1 Answer

My Onkyo tx sr502 quit producing sound?

My system worked fine till the other day. Now it won't produce any sound not even a test tone..I unhooked the wires and reset the system and still nothing.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have the same problem.It's definitely the pre-amplifier board (board with speaker terminals).I did not quite nail the exact component yet but I replaced with a working one and got back sound output.

Posted on Apr 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you use an Onkyo RC-771M remote control to operate Onkyo receiver TX-SR502 ?


Unfortunately, the RC-771M remote doesn't control the TX-SR502. It will only work with these Onkyo models: TX-NR1008 and TX-NR808. The RC-567M is the one for the TX-SR502; replacement remotes that are exact replacements are still available from various places including Amazon.com .

Since the TX-SR502 was released in ~2004, that replacement remote probably won't control other devices that were released in 2004 or later. Onkyo changed its IR code programming before the TX-NR1008 was released in ~2010 and the RC-771M can't communicate with the older receiver. The manuals for the receivers listed above are still available from Onkyo on the product page under the Downloads tab.

I wish that I had better news for you.

Cindy Wells

Jan 31, 2016 | Onkyo TX-SR502 Receiver

1 Answer

The kids played with the remote now i have no sound no test tone but i have picture


try and reset the remote controller to its default settings. See page 50 on the manual.

Jun 24, 2011 | Onkyo TX-SR502 Receiver

1 Answer

When connecting optical inputs there is no audio output


You have to assign each digital input.

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Onkyo-TX-SR502-Receivers-manual/id/365ag217/t/2/

Search the document for "assign".

Mar 27, 2011 | Onkyo TX-SR502 Receiver

1 Answer

I have an audio problem with my TX-SR502.


If your remote also controls the Cable Box you might want to look at its audio settings. Maybe you muted it.

BTW: it would be a good idea to also run video and analog audio from the cable box directly to the TV if it has speakers so you can watch and listen independent of the Onkyo.

Mar 11, 2010 | Onkyo TX-SR502 Receiver

2 Answers

My Onkyo TX-SR502 suddenly no sound output. Why?


Same issue on a friend's receiver. I have checked and no signals from preamp pcb to main amp board, which is idling just fine, all channels. The day he brought in we checked it and it played just fine. I then took apart the faceplate to clean the display window and after that had it working for a day and a half while working on other stuff. He comes back a month later to pick up and now nothing. I have decided this is not going to go any further and just thought I'd share my findings. I think it's time we all move on.

Feb 22, 2010 | Onkyo TX-SR502 Receiver

1 Answer

My TX-SR502 AV receiver has no output sound in any mode but CD. Thsi has been a progressivly deterioration from sometimes sound to finally no sound.


sounds like the receiver input mode may be in the wrong setting. or check the 'direct' button. turn it off

Nov 03, 2009 | Onkyo TX-SR502 Receiver

1 Answer

Onkyo TX-SR502 AV receiver


this could be the pre amp transistor or the power amp that needs replacing
the pre amp transistor is cheap but the power amp is not
if you did not crank it , then it is probably just the transistor that needs replacing

electech

Oct 31, 2008 | Onkyo TX-SR602 Receiver

1 Answer

Onkyo receiver question


One of the speaker maybe are in bad conditions and that burn out the audio amplifier IC you need to change it or send the device to a repair center.Good luck

Apr 28, 2008 | Onkyo TX-SR502 Receiver

2 Answers

Onkyo TX-SR502 - o Sound!


pls make it reset at factory level ,but pls note that you have to keep it in aauto mode

Mar 12, 2007 | Onkyo TX-SR502 Receiver

Not finding what you are looking for?
Onkyo TX-SR502 Receiver Logo

Related Topics:

867 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio & Video Receivers Experts

D. E. Hev

Level 3 Expert

1059 Answers

gbob59

Level 3 Expert

2963 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you an Onkyo Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...