Question about Radio Shack Pro-95 Handheld Scanner

1 Answer

Program prblems I have progrmmed my pro-95 for local (DelawareCo. Indiana) 800 frequencies. as it scans i recieve talk group codes in the form of severe static that i have not progammed into the scanner and dont know were they are comming from. I've tried locking these talk code out but they still interfear with my scanner. any help or ideas? thank you Jon

Posted by on

  • Rick Byrd
    Rick Byrd May 11, 2010

    reword the question maybe ? trying to understand , all i can think of is you may be describing packets or birdies , not a clue .

  • Anonymous Mar 25, 2014

    how to program scanner

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Your scanner has an attenuater.it lets you program your scanner to reduce scanners sensitivity .check to see if its on or off.

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need help with local scanning codes.(northern Indiana and southern MICHIGAN)


For a comprehensive database of active frequencies (they're not codes) in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Jan 16, 2011 | Radio Shack Pro-95 Handheld Scanner

1 Answer

800 MHz frequency Mode problem


You have to program it TRUNKING mode when you enter the control channel frequencies. It is decoding okay as the MO shows motorola control channel and +DG means digital decoded and an OPEN group. You need to press the 'trunk' button everytime a talkgroup comes up that you want it to remember for future 'closed' group (-DG) talk groups. I suggest you go to 'RadioReference DOT com" and there are many forums there for your radio, as well as one or two YAHOO GROUPS specifically for your scanner. 73's

Jul 03, 2010 | Radio Shack Pro-2096 Base Scanner

1 Answer

Where can I find police frequencies for Shelbyville Indiana?


Register for RadioReference.com and you can go to to the database for Indiana, then your county, and then Shelbyville.

Oct 21, 2009 | Radio Shack Pro-95 Handheld Scanner

3 Answers

I get all channels locked out. How do I unlock the channels.


You are pressing the "scan" button in the upper left hand position and getting all channels locked out? Correct?
If you haven't programmed any frequencies the channels will stay locked out. Get your local frequencies by doing a search for police scanner frequencies. Once you have gotten the information for your area press the "PGM" button on the lower right hand side of the key pad. Input your 1st frequency ###.#### then press "ENTER". Press "PGM"key again and enter your 2nd frequency then "ENTER" again. Repeat as often as you wish to enter more frequencies.
When you are done, (you can stop any time) press the "SCAN" button in the upper left hand position and you are in business. You are supposed to be able to choose which memory position you wish to use but I haven't tried to figure that one out.
If you need the manual for the radio go to radioshack site and do a search for PRO95 and it will come up in PDF format.
Hope this helps. I have owned the pro 95 for maybe 6 or 7 years and after doing a little programming yesterday the thing is much more to my liking. It scanns quicker and scans the channels I wish to listen to.

Jul 18, 2009 | Radio Shack Pro-95 Handheld Scanner

1 Answer

All channels locked on my radio shack pro-95 scanner


You are pressing the "scan" button in the upper left hand position and getting all channels locked out? Correct?
If you haven't programmed any frequencies the channels will stay locked out. Get your local frequencies by doing a search for police scanner frequencies. Once you have gotten the information for your area press the "PGM" button on the lower right hand side of the key pad. Input your 1st frequency ###.#### then press "ENTER". Press "PGM"key again and enter your 2nd frequency then "ENTER" again. Repeat as often as you wish to enter more frequencies.
Make sure you are entering your frequencies in empty channels unless you want to over write one that you don't want to use any longer. Press "PGM" until you get to an empty channel.
When you are done, (you can stop any time) press the "SCAN" button in the upper left hand position and you are in business. You are supposed to be able to choose which memory position you wish to use but I haven't tried to figure that one out.
If you need the manual for the radio go to radioshack site and do a search for PRO95 and it will come up in PDF format.
Hope this helps. I have owned the pro 95 for maybe 6 or 7 years and after doing a little programming yesterday the thing is much more to my liking. It scanns quicker and scans the channels I wish to listen to.

Jun 08, 2009 | Radio Shack Pro-95 Handheld Scanner

2 Answers

Unlocking channels


first press the manual button so you can go through the channels one by one. Then look for a button that has L/O(lock out) push this once for every channel you have a frequency programmed for it, the channel will probably not unlock if there is no frequecy programmed to it.

per roupe50 above

Dec 25, 2008 | Radio Shack Pro-95 Handheld Scanner

1 Answer

Trunking frequencies


Did you initialize your scanner? If you did, then you also deleted your trunking banks (1-9). These are the banks that store the channels that were inputted by you. The scanner will display "All channels locked out," when all of these banks are empty. You may have to put the frequencies in again. I suggest using win97. There is a 30day trial. This is the only program that I know of that will work with this scanner.

The pre-programmed channels should still be there. If you press and hold the scan button for a couple of seconds you should see the signal stalker running.

Good luck.

May 02, 2008 | Radio Shack Pro-97 Handheld Scanner

1 Answer

To stop beeping sounds


Good day Gloria, Here is a parts list, http://support.radioshack.com/support_electronics/doc68/68646.htm refrence part number 12392288 COVER ASSY BATTERY, you can go to your local Radioshack and they can order this. Tell them that it is an RSU order, ask for a manager if they don't know what your talking about. That is a special wharehoues that they have for parts. Newly hired associated usually don't have a clue that it exists. Or call 1800-843-7422(1-800-the-shac) to order, they may redirect your call to a local store. Follow this link for the manual, http://support.radioshack.com/manuals/ome20-525.pdf After skimming the manual my self I couldn't find much on the beep issue. It is possible that that beep is coming from the transmission you are recieving, does it that on all frequency's, or just certain ones? Keep in mind that that could also be a weatherband alert tone. I'm not sure, well I hope this helps in someways, If all else fails read pg 83 of the manual to reset the unit. Good Luck

Jul 25, 2007 | Radio Shack Pro-95 Handheld Scanner

Not finding what you are looking for?
Radio Shack Pro-95 Handheld Scanner Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Radio Scanners Experts

Iron
Iron

Level 3 Expert

3018 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

473 Answers

Are you a Radio Shack Radio Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...