Question about E-Machines eMachines Desktop PC

1 Answer

Sytem recovery not fully completed

Someone didn't complete sytem recovery and when I turned my computer on afterwards it only went to the menu to start a system recovery and when I clicked on it, the next screen was showing where a system recovery had already been started it was about 10-15% done so I clicked to finish the recovery, after it finiished I restarted it and it still won't go any farther than the screen to click on start system recovery, so how can I fix this problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 233 Answers

Do you have the OEM Windows CD with Key Code numbers? If yes and there is nothing on the hard drive you want to save you could try a clean install. Go to set-up and make CD-ROM drive the first boot device and install a new OS. Sometimes with Windows this is the easiest thing to do. I see this recovery/restore stuff leaves a lot to be desired. In other words, it doesn't seem to work half the time.

Posted on Jan 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset the Compaq Presario 1200


Step 1:
which operating system ??

Back up to your external hard drive all of the items on the computer's hard drive that you would like to keep. The hard drive will be completely erased during the recovery process. Open the "Start" menu and then click "Shut Down" to turn off the computer. Allow the computer to completely shut down. Press the power button to turn on the computer and then press the "F11" button when "Press <F11> for recovery" is displayed on the bottom of the screen. Select "Recovery Manager" from the utility screen. Click "Advanced Options" and then select "System recovery." Click "Next" to proceed. Follow the on-screen instructions to complete the recovery process.

Feb 04, 2013 | Computers & Internet

1 Answer

Factory reset on presario cq58


Back up to your external hard drive all of the items on the computer's hard drive that you would like to keep. The hard drive will be completely erased during the recovery process. Open the "Start" menu and then click "Shut Down" to turn off the computer. Allow the computer to completely shut down. Press the power button to turn on the computer and then press the "F11" button when "Press <F11> for recovery" is displayed on the bottom of the screen. Select "Recovery Manager" from the utility screen. Click "Advanced Options" and then select "System recovery." Click "Next" to proceed. Follow the on-screen instructions to complete the recovery process.

Feb 02, 2013 | Computers & Internet

1 Answer

Factory rest on a presario cq58


Back up to your external hard drive all of the items on the computer's hard drive that you would like to keep. The hard drive will be completely erased during the recovery process. Open the "Start" menu and then click "Shut Down" to turn off the computer. Allow the computer to completely shut down. Press the power button to turn on the computer and then press the "F11" button when "Press <F11> for recovery" is displayed on the bottom of the screen. Select "Recovery Manager" from the utility screen. Click "Advanced Options" and then select "System recovery." Click "Next" to proceed. Follow the on-screen instructions to complete the recovery process.

Feb 02, 2013 | HP Compaq Presario V2000 Notebook

1 Answer

Is pushing the power button the only way to turn the radio off in a 2001 Impala? I'm use to cars turning completely off once the key is out. Also just recently, my impala did that security thing where...


My girlfriend just had the same thing happen in her 01 Impala. New radio and 150 dollar radio wire harness. If you dont fix it, you'll keep draining the battery till it's broken too.

Here is the security link. http://vatspasslockpasskeysecurityhelp.yolasite.com/

Oct 03, 2011 | 2001 Chevrolet Impala

1 Answer

When trying to do a Sytem recovery, I get an Error Message.


Recovering the system without using Windows
  1. Disconnect all peripherals and internal non preinstalled devices from the PC, except the monitor, keyboard, and mouse.
  2. Turn on the computer.
  3. When the initial blue HP screen appears, press the F10 key repeatedly until a recovery menu appears. The progress indicator that first appears does not indicate that a recovery is taking place. The progress indicator represents the time before the recovery process is started.
  4. When the Recovery screen appears, click Next, and then click Yes to perform a normal, non-destructive recovery.
  5. To perform a destructive recovery, click Advanced, and then click Yes.
  6. After the System Recovery is complete, and the computer starts successfully, update the computer software as follows:
this link is to order disk (from HP) if the 6 step do not work http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&dlc=en&cc=us&lang=en&product=1843604

Jun 20, 2009 | HP Pavilion a1253w Notebook

2 Answers

THE GAME COULD NOT BE STARTED(80020148)


Recovery menu is located by doing this process...Turn off your psp completely. Then hold the R button while the psp is off. Keep holding the R button and turn on your psp. Then it brings you to the recovery menu

Jun 01, 2009 | Sony PSP (Piano Black)

1 Answer

LiquidVideo monitor will not come on at bootup.


Blown capacitors internal to the monitor they can be replaced by soldering.
let me know what you want to do

Mar 22, 2009 | Computers & Internet

1 Answer

Computer Screen Went completely blank and wont turn on


You might want to plug in external monitor to make sure your screen did not burn out before doing anything else.Good luck and have a good day.

Jan 30, 2009 | Toshiba Satellite A135-S2276 Notebook

2 Answers

Acer Aspire 4530-5889 malfunctions when I install sprint wireless


You have the wrong driver installed, it never is a hardware problem

Jan 25, 2009 | Acer Aspire 4530-5889 Notebook PC

1 Answer

E250 Please free 6MB!!!


solution #1 : try HARD resetting it by holding the power button for 15 seconds. if not solution #2 : install and use this tool to repair your sansa. Its called the Sansa Connect Recovery Tool. You get on the sandisk website, you have a manual also . go to : http://www.sandisk.com/Retail/Default.aspx?CatID=1532

Jul 14, 2007 | SanDisk Sansa e250 MP3 Player

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18386 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...