My dishwasher is not emptying for some reason. It just keeps going in it current cycle. I have cancelled the programme by pressing and holding the on/off switch as told in the instructions. However, is there anyway I can get rid of the water out of the bottom so that I can maybe check for a blockage or is there anyway I can start a programme to just empty the dishwasher rather than start a programme again.
Comments:
May 27, 2007
- I just realised, Ive posted this under the wrong appliance. It is not a built in Zanussi Aquapulse de6544 its a free standing one. Will this make a difference??
-   my dishwasher start light comes on but i cant press any of the programme button to start machine!! so machine wont run!! please can anyone help with advice of what this could be pleeeeaassee????x-   hunnybunnyx
find the power source (usually at the circuit breaker panel)-then turn the breaker for the dishwasher off and return to on after 10 minutes and try restarting.
Zanussi Aquapulse dishwasher - is filled with water inside, is not washing and the lights keep flashing on and off - has anyone any idea what may be wrong with it?
Was this helpful?
Yes
No
Popular Solutions for Zanussi 24 in. DE6544 Built-in
my dishlex 200 is stuck on the eco cycle. Tried resetting by pressing both start/program buttons,...
(More)
my dishlex 200 is stuck on the eco cycle. Tried resetting by pressing both start/program buttons, nothing. any ideas
Dishwasher,zanussi DW 905, not using rinse aid, and it shows. Adjusting dose control makes no...
(More)
Dishwasher,zanussi DW 905, not using rinse aid, and it shows. Adjusting dose control makes no difference. ( The system would not recognise DW 905, so the product model no. listed below was used to post the problem).
I have exactly the same problem on my Zanussi DE6544 as one previously posted by eimusi on 6 Aug 09...
(More)
I have exactly the same problem on my Zanussi DE6544 as one previously posted by eimusi on 6 Aug 09 ( which was not answered) The power light is on but no other function buttons produce any response. I have already replaced the door catch including the micro-switch, but this did not solve the problem Any ideas please Thanks
I have exactly the same problem on my Zanussi DE6544 as one previously posted by eimusi on 6 Aug 09...
(More)
I have exactly the same problem on my Zanussi DE6544 as one previously posted by eimusi on 6 Aug 09 ( which was not answered) The power light is on but no other function buttons produce any response. I have already replaced the door catch including the micro-switch, but this did not solve the problem Any ideas please Thanks