Re: unlocking child lock on the sharp microwave model...
The Sharp Microwave/Convection oven I have says to touch the Custom Help button, the number "1", then touch the Start Button. To turn off the child lock, press the Stop button.
Or just unplug it, wait 1 minute, and plug in.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
" 1. CHILD LOCK
The Child Lock prevents unwanted oven operation
such as by small children. The oven can be set so
that the control panel is deactivated or locked. To
set, touch Custom Help, the number 1 and Start/
Touch On. Should a pad be touched, LOCK .
.. ON will appear in the display.
To cancel, touch Custom Help and Stop/Clear. "
Reset the clock. Press "Clock" and the correct time, using
the number pads. Press "AM/PM" if applicable, and press "Start" or
"Clock" to confirm.
Press "Timer On/Off" to reset the timer if nothing on the
touch pad will operate. Use the number pads to select a new timed
amount, if desired, and press "Timer On/Off" to start. Press again to
Press and hold "Clear/Off" for three seconds if the timer
will not function or is blinking when you touch the pads. This will
release the "Child Lock" feature. Make a new touch pad selection.
Disconnect power to the microwave if following Steps 1
through 3 does not resolve the blinking timer. Wait a few minutes, and
then restore power to reset the microwave.
However if the problem persist the display board main control board is faulty
The Child Lock prevents unwanted oven operation such as by small children.
The oven can be set so that the control panel is
deactivated or locked. To set, touch CLOCK, the
number 1 pad and then touch the START pad
and hold for 3 seconds. Should a pad be touched,
will appear in the display.
To cancel, touch CLOCK, the number 1 and
Press and hold the Clear/Off button for about 3 seconds again. This toggles the Child Lock.
I hope this helps.
Cindy Wells (I used the model given above to check if the toggle command was the same or different from the lock command. If your microwave is a different model, try pressing the CANCEL button for about 3 seconds.)