Question about Power Acoustik PADVD340TV In-Dash DVD/MP3/CD/CDR/CDRW Player with built-in TV Tuner Car Video Player

1 Answer

When my headlights come on my cd/dvd player screen turns blue

I am unbale to use my unit when i turn my headlights off, how to i bypass this? I have a 8" touch screen power acoustic with build in dvd/cd/ipod. HELP!!

Posted by on

  • Anonymous Apr 26, 2009

    when I turn my headlighs on the screen goes blue.....How can I fix this?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

First of all your system is wired incorrectly. The person who wired it up is using either a power or remote signal from a light switch. That's NOT good. To correct find proper remote wire or you can use a power source that turns off when you turn ignition off and remove it from the Head light switch wires. Easy to find use a test light and check for power wire when ignition is on and No power when ignition is off. Good Luck contact if you need more help.Thanks for using FIX YA

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DVD Bypass Codes w/ NO SWITCH


1- put dvd inside the video player
2- wait for blue screen to pop up and you should hear music begin playing
3-press stop twice on your remote
4-enter the code 26604

Dec 19, 2012 | Dual Xdvd8181 Cd/dvd/mp3/wma Motorized 7"...

3 Answers

Bypass code for the dual 8181 cd player


For the Anti-Theft Passcode if you forgot yours - Turn to player on. Make sure the screen is out. Press and HOLD the MUTE button. While holding the MUTE button, press and HOLD the POWER button. (Should be holding them both down at this time.) After about 12 seconds a new passcode screen should come up. Release the MUTE and POWER buttons. Type in 122164. Press OK. Your passcode is now reset to 0000.

For The E Brake Passcode - Put in a DVD. Wait until you hear the sounds of the DVD. Press STOP twice on your remote. Press 22604 on the remote. Press OK/ENTER on the remote.

Nov 09, 2008 | Dual XDVD8181 Car Video Player

1 Answer

Dvd player for my car


Could someone tell me how to connect automatic antenna wire for car and it raise up when turn the radio or turn the stereo on ?
i had connect the blue wire to antenna put is not working?

Best regards
David

Aug 23, 2008 | Car Video Players

2 Answers

Screen motor stuck


This problem happened to me. You need to disconnect the unit from the battery. Let it sit. Then hook it up. You might have to turn it off an on a couple times, then bingo! it will open again!

My screen just turned off... I get sound for about 3 seconds when I first start the car, then it shuts off.... any ideas??

Jun 09, 2008 | Pioneer AVIC-D2 In-dash Car Audio Stereo...

10 Answers

My phase linear uv7i can't plays dvd's or cd's and the screen is totally blue


caution it´s unlawful to operate a vehicle while video is dispayed in thr drivers viewing area
engage emergency brake sequence to enjoy video???? help help please

Jan 26, 2008 | Phase Linear UDV9010 Car DVD Player

5 Answers

E- brake bypass


Thanks for everyone's help. The bcar screen actually is the backup camera screen which is activated by the orange wire and when I turned on the lights, it got activated. I disconnected the orange wire and everything is fine. When I get a backup camera I'll connect that wire to the backup lights so that it will come on whenever I put the car in reverse. You are right that their manual is not very clear at all. I called their tech support and they couldn't help me trouble shoot the problem either. The unit is functioning perfect now but my next beef is that you can't change the XO vison default screen when a cd is playing. It would have been nice if you can scroll some jpeg shots of anything else besides looking at the xovision logo. I guess I can't have it all for $340 so, I'll stop whinning.

Jan 26, 2008 | XO Vision XO-1400 Car DVD Player

1 Answer

Bypass switch


This is the way to do it without engaging the parking brake sequence, thus you're inputting the code blindly.
1) Insert the DVD and you'll get the blue screen.
(If you have more than one tv, the unit itself will have the blue screen but the additional tv's you have plugged in will NOT, they will show the dvd menu. Thus you will be able to see the hidden menu on the additional screens after inputting the code, but not on the main unit because of its blue screen.)
2) On the main remote, push stop twice and then 1, 2, 6, 4
3) Push the joystick on the unit SOUTH twice and then click it once.
4) Press SYS SETUP on the main remote twice to save your settings

Nov 11, 2007 | Jensen VM9510 Car DVD Player

2 Answers

Not pioneer but kenwood indash dvd player what easy way


Run your parking brake ground throught a manual switch and switch it off before you turn off your car everytime. Goodluck.

Nov 08, 2007 | Pioneer AVIC-N2 Car DVD Player

1 Answer

JENSON vm9312 Video Bypass


check this out man, go to fm/am mode. with the remote hit the setup botton. then enter 543210 and be sure it beeps on every diget. then hit the hammer/screwdriver icon and turn the parking brake "on"

Oct 09, 2007 | Audiovox Jensen In-Dash DVD/CD Receiver w/...

Not finding what you are looking for?
Car Video Players Logo

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Video Players Experts

yadayada
yadayada

Level 3 Expert

61127 Answers

Jose Velazquez
Jose Velazquez

Level 2 Expert

227 Answers

Josemuri

Level 1 Expert

32 Answers

Are you a Power Acoustik Car Video Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...