Question about PC Desktops

1 Answer

Software Install Problem

After installing the program Ulead DVD MovieFactory 6 the process says to reboot and then XP will not “nomal boot”. I have to go into safe mode and restore to a point before installation. When XP then comes up it has a window that says “The application failed to initialize properly (0xc0000135).

Posted by on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Hi
1st you install a windows installer software in your pc then install your software
i am sure it is easy way to install your software


thank you

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't delete any of the d drive even after restoring factory settings


Which operating system ?


some operating systems have part of there operating system stored in partitions which are protected other operating systems like Vista have partitions which have there recovery back up and also are protected



Sometimes there's no better way to repair a damaged Windows XP install than to start from scratch and reinstall the whole thing. It's a drastic move, but it is almost guaranteed to work. (Only serious hardware issues or incorrectly installed files can cause errors in this case.) If all other options have been exhausted, and your computer still won't function correctly, fear not: After a reinstall it should be running as good as new.

Locate an XP install disk, preferably the one that came with the computer, and any other software packages and drivers. Most of the time these will come packaged with the computer at the time of purchase. To save your data, copy information in your "My Documents" folder and any other important data you might have stored on the hard drive to a flash drive, CD or an external hard drive. Insert the XP install disk into the computer's CD drive and reboot the computer. The computer should automatically boot from the disk, loading the blue Windows XP Setup screen. On some computers, you may need to press a button when prompted to boot from the disk. After the Windows XP Setup has finished loading files, press "Enter" as prompted on the screen to set up Windows XP, and then accept the Licensing Agreement on the next screen by pressing "F8." Navigate the partition menu to find the partition on which Windows XP had previously been installed (likely, there will only be one) and press "D" to delete it. Verify that you want to delete the partition on the screens that follow. Set up a new partition, press "C," set the desired for the partition and press "Enter" to create it. The new partition will now be listed on the previous partition menu. Select the newly partitioned space, and press "Enter" to set up Windows XP on it. The Windows XP Setup program will format the new partition and continue with the graphical user interface portion of the installation process after the computer reboots. Navigate through the set-up menus that follow. The setup program will reboot the computer and load Windows after it has finished installing files. Reinstall any drivers and software that may previously have been installed on the computer by inserting their disks and going through their installation processes. Download Windows updates from Microsoft's website. (See Link Below.)

http://www.microsoft.com/windows/downloads/windowsupdate/default.mspx

Mar 04, 2013 | Acer Aspire M3201 Phenom X3 8650 PC...

1 Answer

Is this computer able to dual boot win 7 and xp


Which version of xp are you trying to install 32 or 64 bit ?

Your ability to install a second operating system on your Windows 7 system hinges on one thing: partitions. If your computer has only one partition, you can't dual-boot your system without erasing all information on your computer. Two hard drives, or two partitions, enables you to dual boot. Check this information first, before proceeding.

Click "Start" and type "disk management" into the search bar. Click on "Create and format hard disk partitions" in the list of programs to open "Disk Management." Look at the list of partitions and available drives. The information here will be different on every computer. "C" is your primary hard drive and active operating system partition, and this drive contains your Windows 7 installation. You can't install Windows XP here without formatting the system. Check for secondary drives and partitions in Disk Management. Your system may have a "D" or "E" drive. Some computer manufacturers create a hidden partition with recovery software: don't remove this partition. If you have a secondary partition called "D" with more than 2GB of free space, you can install Windows XP here. b> Installing XP b> Insert the Windows XP Setup disc into your CD or DVD drive and close any windows that appear. Shut down your computer with the disc in the drive. Turn the computer on and look for a message saying "press any key to book from CD." Press any key on your keyboard when this message appears. Most computers are configured to look to the CD or DVD drive first, before booting to the operating system. If your system doesn't recognize the disc, you will have to enter your BIOS and change the boot order. Look to your manual for information on changing the boot order. Press "Enter" on the "Welcome to Setup" screen to load the Windows XP setup program. Read the license agreement and press "F8" to accept. Windows will detect that an operating system is already installed on your primary partition and present a list of other partitions to install XP. Use the arrow keys to select your secondary partition ("D") and press "Enter" to confirm that you want to install XP here. Then choose what to do with the partition: leave the file system intact or format the partition using FAT32 or NTFS. Windows XP supports both file systems, but requires NTFS on partitions larger than 32GB. You don't need to format the drive to install XP. Follow the prompts on screen to enter your personal information, serial number, and date and time. The setup program copies files to your PC and reboots -- don't press a key to boot to the CD. When you have to operating systems installed, a DOS screen appears asking you to choose an OS; press the down arrow key to highlight Windows XP and press enter to complete the setup. You will have to choose this every time to boot into XP, otherwise your computer will boot to Windows 7 by default. Hope this helps.

b>

Jan 06, 2013 | HEWLETT-PACKARD Pavilion Desktop with AMD...

1 Answer

What is GNU grub?


The Grand Unified Bootloader (GRUB for short) is a program developed by the GNU software foundation. This program allows your Windows machine to load a number of different operating systems by presenting the user with a choice when the machine boots. This allows you, for example, to have both Linux and Windows XP installed on the same machine. If you find that you need to restore your XP system to a previous state and want to remove GRUB from your Windows XP, the process can be done in just a few minutes.

Ensure that your computer can boot from the CD/DVD drive. Start your computer and watch the startup screen. It will flash the key combination you need to press to enter BIOS. Enter this key combination and go into the system BIOS. Look under "Boot Options" or "Boot Order". Select "Boot from CD/DVD Drive" and make sure that it is listed as the first in the boot order. Save your changes before you exit the BIOS. Open the CD/DVD drive and insert your Windows XP install DVD. Reboot your system. Press "R" for "Recovery Console" when the "Welcome to Setup" screen appears. Enter the administrator password. At the prompt, type the following command: fixmbr Allow the XP system to recover the boot sector. When finished, it will return you to the command prompt. Type:exit Reboot your XP system. Hope this helps.

Dec 30, 2012 | PC Desktops

2 Answers

Hello. I'm going to do a manual reinstall of windows xp on my Dell Vostro 200. I wanted to know at what point should I install my virus protection. Should I install the virus protection after installing...


you should install the driver for the network first ..so to be able to install the antivirus ..cause most of them need internet connection for a complete and correct install...and after that the first thing is to install the protection cause during the installing of any program the computer communicate with the net and you are in danger ..so ...in principle you should install the protection first ..but this is not possible unless you have a on board lan card that installs itself from windows..
after you make the internet communication ..first thing is to protect yourself..

Oct 01, 2010 | Dell Vostro 200 PC Desktop

1 Answer

Forrmat error


It is incompatible of system hardware and software. follow this steps bro for windows XP operaing system. 1.check your system hardware requirements so that it will fit to the operating system that you'll use.(for CPU 2GHz Processor X86 X32 16bit or higher, 2G available Hard disk Space to secure the installations.512Mb Video Graphics.2GHz memory RAM X86 X32 16bit or higher. 2.reboot your system hardware. 3.press delete button to configure boot hardware configurations. 4.switch to DVD or CD drive depend on what type of ROM you've use to run the installations. 5.insert the CD or DVD operating system installer. 6.hardware will proceed into installations process and your done.

Aug 03, 2010 | PC Desktops

1 Answer

Installed a new dvd burner for Hp computer. Running Windows XP. Installed Nero 8 Software. Door doesn't always open when button is pushed or after burning a dvd. Computer also has another cd/dvd drive....


it has to do with a new hardware installation process....check IDE cable that they are correctly connected and try to check system setup so that the CMOS identifies both, primary & secondary devices....if not, u need to install a driver for the newly installed one....

Oct 05, 2009 | PC Desktops

2 Answers

HOW DO YOU INSTALL A SECOND OS ON A SLAVE DRIVE. I AM RUNNING WINDOWS XP HOME EDITION. I WANT TO INSTALL WINDOWS 98 SECOND EDITION ON A SLAVE DRIVE DISC. SOME PROGRAMS I HAVE WILL NOT WORK ON XP.


You cannot install 98 directly on your system slave drive, but there is a way to install it.

1) disconnect your primary drive
2) make your slave drive as primary.
3) install 98
4) Connect your actual primary drive again and start your system

XP records your mac id of your motherboard and 98 does not records, the other way is, you can install both the OPS on your one primary drive by creating different partitions, you will need to full format your drive first.

1) Full format your primary drive.
2) Create partitions.
3) Install 98.
4) Install XP in different drive of your same hard disk

You will be able to see both your OPS when you start your system.

Sep 18, 2009 | PC Desktops

2 Answers

Lost restore disk,want to install oem windows xp. computer doesnt read disk


I assume you're saying that the pc is not booting from the DVD/CD? If that's the case, you
need to go to the BIOS setup, where you need to change the device boot order. It's now
probably set to start running from the hard drive, reason why your DVD/CD is not booting.
To go to the BIOS setup, press the F2 or delete, or whatever key the first POST messages
instruct you to use to go into SETUP mode. Different BIOS manufacturers use different
keys, so you have to be quick and interrupt the boot process using the correct key. If you
fail to determine what key it is, reboot once again, until you see/read what key does the
job.
Next, once you're into the setup screens, look for one set of options called Boot Options
or Boot Order. Read the instructions to learn what keys to use to change the values.
Ensure that the first device accessed is the CD/DVD drive, then whatever else next, etc.
Once that's done, save your settings following the prompts, load your DVD/CD and reboot
again.
That should read the disc and start the installation.
Good luck!

Aug 21, 2009 | Dell OptiPlex 170L PC Desktop

1 Answer

I have a Toshiba M70 laptop. I want to revert to the factory settings and re-install Window XP. The Product recovery DVD ROM does not run any program but just has a large file that Windows does not...


you should be able to boot to that disk and begin the reinstall process. just put the disk in, reboot, and watch the boot process to give you a prompt similar to "press any key to boot from CD..."
That should start you install.

Jul 11, 2008 | Toshiba PC Desktops

1 Answer

Downgrading to xp


Hi,

You did this right:
1.Boot from XP disk
2.Deleted partitions
3.Installed XP on the new partition
4.Installs but then wont go through the rest of the process?

Thanks,
Cam

Oct 17, 2007 | Microsoft Windows Vista Business DVD...

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...