Quinny Buzz front swivel wheel won't lock.

In normal use, the front wheel needs to swivel freely - then this stroller's drive is easy and manageable with one hand (we know from extensive use with 2 kids and shopping on board).

The front wheel normally can not collide with the car. If the wheel assembly / lock is not correctly inserted, it can lock / unlock uncontrolled: try to disengage and mount the front wheel unit again.

Unsufficient tire pressure can also detoriate the drive.

According to the manual:

To lock it into the fixed position, rotate the swivel lock until 2 straight arrows appear in the display.

You should find the manual here. www.karlisles.com.au/baby_repairs_spares/instruction_manuals.html

hi, this is a very common problem, you could try this first
http://www.youtube.com/watch?v=GUY6QO4w54Q

another option is to replace the front wheel unit (have you seen the new all terrain set )

http://www.kiddicare.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&catalogId=10751&langId=-1&productId=102143&source=froogle&cm_mmc=Froogle-_-Shopping%20Sites-_-CPC-_-Froogle

Hi,

The best thing to do is to remove the front wheel (depress the black buttons either side of the front axle and pull!) then completely clean the wheel assembly in warm water and a SMALL amount of gentle detergent, then dry completely, apply a small amount of vaseline or similar, then replace. This should help.

Hi, apply the brake.
Go round to front of buggy.
Hold the 2 large grey buttons on side of frame.
1 pushes down 1 pushes forwards do this & pull buggy down towards you, this will fold it as long as the brake is on.

Hi you can buy new & used very cheaply on ebay

The Buzz you bought was fitted with a safety strap. If you stand at your buggy as though pushing it, on the left side of the handle just below where the top rails turns through 90 degrees towards the buggy, there should be a plastic O of a piece of tight bungee elastic that pulls out and snaps over a pin on the chassis when in the folded position. If this is not there then it has been broken off. I suggest you speak with Dorel UK 01842 763 281 (Mon ? Fri, 8:30 am to 4:30 pm). They are the sole supplier of parts/repair for Quinny in the UK

melt some candle wax into the hole and put a drawing pin in it so its level and it spins easily without getting stuck

Hi, you can download the manual from the quinny website, but as a quick guide, the best I found was - first stand with your foot against the front wheel (so it doesnt move forward) then press the grey buttons on either side of the chassis and at the same time draw the frame downwards towards your foot, please remember you can only fold down with the seat in place if the seat is facing forward (ie baby facing outwards) it wont fold down with the seat facing mum, there are also demos on you tube, hope ive helped and not been too complicated :)