Question about ID Tech Barcode Scanners
Cant write 1st track
out of warranty, need repair svc in NYC area
Tips for a great answer:
Aug 28, 2011 | Barcode Scanners
May 29, 2011 | Barcode Scanners
May 16, 2011 | Barcode Scanners
That's a lot of questions! Well, the speed at which a CD/DVD-Writer
writes to a CD-RW depends not only on the media and the drive, but also
on the table of media types that is built into the firmware of the
writer. The drive tries to recognise the blank media inserted, and
matches it with the list in its table to decide the speed. It also
reads the speed certified by the media manufacturer, and if these don't
match, the writer decides to use a safer, lower speed.
Another reason could be that the writer does not support the intermediate speed of 12x-for example, it may support lOx, with the next supported speed being 16x.
Your motherboard supports IDE as well as SATA hard drives of the highest capacities available. You cannot add more RAM running at a different frequency, but you can certainly replace your present RAM with 533 MHz DDR2. It supports any Intel processor with the LGA775 socket interface barring dual-core processors.
Feb 27, 2011 | Barcode Scanners
Nov 12, 2010 | Barcode Scanners
Oct 15, 2010 | Barcode Scanners
Sep 07, 2010 | Barcode Scanners
Aug 21, 2010 | Barcode Scanners
Apr 07, 2010 | Metrologic Instruments MS1690 Handheld
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: