Question about American Standard Kitchen Faucet 6310 020 White Easy Touch Pull-Out Kitchen...

1 Answer

How do you change the cartrige for easy touch american standart k

Had a leak around the base of the fixture. American standard sent me a new cartridge, o- ring, and main body piece that appears to have a gasket on the bottom. They did not send instructions, thanks.

Posted by on

  • 3 more comments 
  • 554775584 Jan 09, 2009

    Thanks for your help. On this faucet I can not locate the screw that removes the handle.

  • 554775584 Jan 09, 2009

    There is a pea sized medallion half- red half blue. I pulled that out but could not see the screw. I assumed that this is where it would be hidden. Also , if the screw is there, is it to be removed in the off position? Thanks

  • 554775584 Jan 09, 2009

    Will try today, thanks

  • 554775584 Jan 09, 2009

    Will try today, thanks

  • Anonymous Feb 08, 2009

    FAUCET LEAKS FROM BAjSE OF UNIT

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,605 Answers

Unscrew a alen screw on the underside of the handle.
unscrew the cap that is holding the main body of the fixture.
pull up the fixture.
install in reverse order.

Posted on Jan 06, 2009

  • Frank
    Frank Jan 09, 2009

    do you see any plastic cap or any thing that is about the size of pencil.

  • Frank
    Frank Jan 09, 2009

    you need a allen screw driver, insert the driver and trun counterclock, loosen it, and pull the handle up. then you can get to the locing cap under nearth.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Base of faucet leaks- cannot remove set screw at handle American Standard Elite kitchen faucet series 4453


if you are having trouble removing the set screw make sure you are using the correct size allen wrench and confirm that it is a allen screw and not a trox screw. After doing this try tighten the screw slightly before loosening it. This should break it loose.

Feb 25, 2011 | American Standard Kitchen Faucet 6310 020...

1 Answer

I just installed an American Standard easy touch faucet 6310F. The pressure is very low. Anybody know what the problem may be?


At the base of the handle there is a flow regulating check valve. Shut off water supply and unscrew handle and look for debris. Many times the washers break down on the shutoffs under the sink and release "crumbs", these usually block aerators and sometimes the cartridges on certain faucets. Hope this was helpful.

Feb 16, 2011 | American Standard Kitchen Faucet 6310 020...

2 Answers

Kitchen faucet single handle pull-out. The base of


I have the same problem with an American Standard Reliant Kitchen Faucet that wont swivel anymore. I called American Standard and they are sending me the replacement parts to fix it free of charge, I have had mine 6-7 years and they said it was under warranty. Call 800-442-1902. Good Luck

Jan 09, 2010 | American Standard Kitchen Faucet 6310 020...

1 Answer

I have an american standard pullout disc faucet which is leaking. I replaced the disk. Now it is leaking more than befoe from the base. What should I do? Is it the o seal at the bottom? chuck


Chuck,
Definitely change the O ring, and ensure the disc is installed properly, as well as ensure there is no debris on the disc. It sounds like the O ring was torn during the first procedure. Good Luck.
Steve

Oct 11, 2009 | American Standard Kitchen Faucet 6310 020...

1 Answer

American Standard Easy Touch 6310 kitchen faucet leaks at base


you must remove the faucet form the sink. under the plate in the middle is 2 screws. remove the screws to remove the body.

Jul 15, 2009 | American Standard Kitchen Faucet 6310 020...

1 Answer

Hi folks, seems stupid, but I'm changing the cartridge on my american standard kitchen faucet. If I line up the holes on the botton of the cartridge with the holes in the fixture, I don't have the ability...


Most likely you need to adjust the hot limit safety stop which restricts handle swing to limit the high temp of the water and avoid scalding... check out this link to the install manual for your faucet. Also includes detailed diagram of cartridge alignment just in case you need it.

http://www.americanstandard-us.com/Assets/pdfs/as/install/Install_1859.pdf

Hope this helps, Tripp

Dec 13, 2008 | American Standard Kitchen Faucet 6310 020...

Not finding what you are looking for?
American Standard Kitchen Faucet 6310 020 White Easy Touch Pull-Out Kitchen... Logo

Related Topics:

686 people viewed this question

Ask a Question

Usually answered in minutes!

Top American Standard Faucets Experts

Roscoe007

Level 2 Expert

101 Answers

john h

Level 3 Expert

7170 Answers

Rich Florenzen

Level 2 Expert

333 Answers

Are you an American Standard Faucet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...