Question about Extended Systems ExtendNet SX Print Server
My ESI-2811 switched from the 10BaseT setting to the 10Base2 setting and I cannot communicate with it. Does anyone know how to switch it back to the 10BaseT? Does anyone know how to configure it? Does anyone have a manual? Thanks for any input.
Use a crossover cable to connect laptop directly. Does your print server have a static IP address and do you know what it is? If yes, set a static IP on your laptop that is in the same subnet and with the same mask, then you should be able to ping it. If the print server is obtaining an IP by DHCP, you will have to set up and run a DHCP server on the laptop (or connect it with a straight-thru cable to an existing router that offers this service).
Posted on Feb 18, 2011
Tips for a great answer:
Sep 03, 2013 | Extended Systems Pocket Print Server
Feb 20, 2013 | Extended Systems ExtendNet MPX Print...
Feb 14, 2011 | Extended Systems ExtendNet 100X Print...
Feb 11, 2011 | Troy ExtendNet 100x Print Server
Dec 22, 2010 | Troy ExtendNet 100s Print Server
Jun 21, 2010 | Print Servers
Oct 31, 2007 | Troy ExtendNet SX Print Server
220 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: