Question about Cyberhome CH-DVD 300 DVD Player

1 Answer

At setup, a buttom was pushed and the picture became scrambled

Can not clearled view the setup functions due to the clariety and it seems to be acting as it is in fast forword. I do not have a manual for this, The product is a DVD player Cyberhome, CH-DVD300. Any type of help would be appriciated.

Posted by on

  • deltonbradle Jan 06, 2009

    It got me closer than I was, but it didnt change the problem. I can see the program screen in the background but cant see what function it is asking to set. If anyone knows where a manual can be found please advise. Thank you for your help, Del B

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 716 Answers

Press And Hold The On Off Switch For 30 Seconds Or So This Should Reset The Device Then Try It Again. If Thats Unsuccessful Unplug The Unit And Press And Hold On Off Switch For 30 Seconds Again This Should Reset To Factory Presets If The First Didn't Work.

Posted on Jan 06, 2009

  • Michael Fisher
    Michael Fisher Jan 06, 2009

    Here You Go
    http://download.cyberhome-dvd-help.com/u...


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the picture to come on can't see setup on my screen


The screen's backlight function is not working. The player is inexpensive and not worth the cost of repair. Sorry.

Nov 26, 2014 | Protron PDV-288 7" LCD Portable DVD Player

1 Answer

Can record on DVD disc will not play on DVD player


Make sure the materials you're trying to record onto the DVD
is not Copyrighted. Try to record a normal TV program onto your
VHS, transfer it to your DVD and then play it. See if that will
work. A VHS movie is usually Copyrighted and Protected by
Macrovision. The picture output can be displayed on a TV set
for viewing but is scrambled black to a DVD Recorder.

Jul 16, 2011 | JVC DR-MV100B DVD Recorder/VCR

1 Answer

Remote control doesn't work


The only thing that comes to mind is somehow the remote became unprogrammed. This happens with some factory remotes, if you reset the code for the remote it may start working again.

There are other times (both of these Ive had experience with) when the remote will just stop working due to a defect.

Post back for any further help, thank you for stopping by Fixya!

Jun 21, 2009 | Samsung DVD-V5500 DVD Player/VCR

1 Answer

How to reset (manually) factory defaults?


Unplug It And Hold Down The On/Off For 30 Seconds Then Release And Plug It Back In. This Should Reset It If Not Let Me Know.
Thanks For Using Fixya.com

Jan 17, 2009 | Protron PD-DVR100 DVD Recorder

2 Answers

Setup Menu will not display on TV screen


Ok, on the back of the unit, there is a single yellow composite output. There may also be a Red, green,blue.Component. Take 1 RCA cable and plug it into that yellow output, and route it into your TV input, also a yellow composite. Make sure that whatever input you put that into on the tv, that you change the TV input to that to view your player. when and if you get a picture, you should be able to get to the menu through the GOVID remote.

Later once that Path is working, you can upgrade it to the Red,. green, blue, if your TV has the inputs. You did not give a model for the TV or I could tell you what it has.

If you need any more clarification, please reply.

Best Regards,

Charles


Jan 05, 2009 | GoVideo Go Video DVD/VCR Combo

2 Answers

Menu scrambled


Try resetting the unit. On the front panel of the unit (not the remote) hold down the channel up and down buttons for 5-7 seconds without a disc inside. This is a factory reset.

I did this this morning and so far so good.

Mar 22, 2008 | Samsung DVD-R135

1 Answer

SONY DVP NS5OP is LOCKED


probably you locked it mistakenly, what you should do leave the player in standby, press RETURN, ENTER and then POWER buttom again. watch a nice movies.

Feb 07, 2008 | Sony DVP-NS50P DVD Player

1 Answer

Scrambly TV


take a quick peek in the manual and find out where to disable the progressive scan features. may be a button on the back, or you may have to go through the on screen menu to find it. take the disc out and see if you can view what's on screen. or since you said you had a couple of movies that did work properly, put one of those in, start the movie, go into the dvd player setup menu and disable the progressive scan settings

Aug 13, 2007 | Sungale DVD-2026 DVD Player

1 Answer

DVD player


unplug it and plug it back in and press the progressive button to turn it off, should work. Yeah that blue screen sucks, i would have thought you can get to the menu no matter what but that's sanyo for you, well most other brands also...

Jul 21, 2007 | Sanyo DVW-5000 DVD Player/VCR

Not finding what you are looking for?
Cyberhome CH-DVD 300 DVD Player Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyberhome DVD & Blu-Ray Players Experts

zappal

Level 1 Expert

48 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you a Cyberhome DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...