Question about RCA D61W20 61" Rear Projection Television

1 Answer

Convergence board swap questions....

I have a 60 inch rear projection tv made by RCA and my convergence is messed up. My convergence board is a PTK195AP........I found a PTK 195 and I was wondering if it would be compatable with my tv?? The model # on my tv is(P56812BL). This is my first rear projection tv and this is my first issue with it so far. I am pretty familiar with comp parts and resoldering connections and other things of that nature but I would rather replace the whole unit rather than just piece it back together.

Posted by on

  • Corbin Hill Jan 08, 2009

    it was actually the STK chip on the power board. I changed that out and now it works like new.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

You can try to change it out and go to convergence adjustment mode on service mode to setup the template.
But I rather replace couple trans and leaky diode on your old convergence amp board to save my time

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace a convergence power supply on an rca 52 inch projection tv


The convergence power supply is the small narrow board which is held in place with a couple of screws. I am attaching a pic of the board yours may be slightly different 8_9_2012_4_22_22_pm.jpg

Aug 09, 2012 | RCA P52930BL 52" Rear Projection...

1 Answer

I have a 60 inch rca rear projection tv and it looks like the screen is bowed can i fix this myself or will i have to pay someone to do it


Ur tv have a problems known as a convergence picture problems it is dead.The tv convergence board it is dead and must have to repair like replacing 2 STK convegence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence pictures problems.Yes,u can fix it and do the works by ur self.But u have to have all the requirement tools,have the skills and the know how to do the work on a circuit board and can do basic soldering work like take out ICS chips and replaces ICS chips on a soldering circuit board and also can take out some small dead components parts and replaces it with doing a soldering works.U can do that?Yes?Tries websites like Tvrpairworld.com,Tvrepairkits.com to buy a whole complete convergence kit that belong to ur DLP tv make and mode about $70-$75 also the kit will have a DVD tutoring disc.As i said u have all tools and the skills to work on a cucuit board and changes ICS and resistors u can do the job ur self.Or tvs shops will cost u like $300-350 for parts and labors.

Aug 30, 2011 | Sony KP-51WS500 51" Rear Projection...

1 Answer

I have a 60 inch RCA tv rear projection digital. the picture is like seeing 3 of everything. I have being able to fix this in the past by using the convergence option on the setup menu. but now the...


what it is the tvs like this are mento be serviced every 3 years or so the convergence settings are in the back only user ones are in the settings dont try this yourself though i broke mine lol it will cost 120 pounds tops to fix dont worry its worth it if this has helped please give me thumbs up because people are just taking answers and not voting

Jan 15, 2011 | RCA P60921 60" Rear Projection Television

1 Answer

I need a convergence kit for a rca 52 inch rear projection tv


what type of problem with convergence? no convergence at all? pitcure bowing? this in the setup menu do you have the convergence option? a convergence ki in a standad porojection has stk ic/s this model does not .you might have the fl231 fuse problem.. generally its board replacement. then the problem becomes alighnment.

Aug 23, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

My 60 inch Maganvox tv is blurry and the letters at the bottom are blurry. Can;t hardlt make out the picture now.


Replace STK convergence chips there are two next to the heat sink.Unsolder old and solder in the new.

May 21, 2010 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

RCA projection is having color shadows and blurred picture.


Hi, this is failed convergence and it is due to a faulty convergence board chip set. simply replacing the convergence board in this set Will fix your issues.

May 21, 2009 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

Convergence problem with old rca 46 in rear projection TV


you will need to have a shop re converge it or order a new convergence board.

Nov 17, 2008 | RCA P46924 46" Rear Projection Television

1 Answer

RCA P60921 Rear Projection TV


converge power supply small pcb about 3 inch by 7 inch with stk-730-xxx chip on it ..replace the chip

Oct 29, 2008 | RCA P60921 60" Rear Projection Television

1 Answer

RCA Projection TV Alignment


you would have to swap out the convergence board itself and you would need to order the part either from a delaer or through a tv repair shop.all you have to give them is the make and model of the tv and they will tell you what you need from there as far as which board etc

Sep 03, 2008 | RCA D61W20 61" Rear Projection Television

Not finding what you are looking for?
RCA D61W20 61" Rear Projection Television Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...