Question about RCA D56W136D 56 in. TV/DVD Combo

2 Answers

RCA D56W136DBYX1 Manufacture Part # for Signal board

Well, I need to replace signal board on RCA D56W136DBYX1, but the RCA parts is usually 6 digit number which is not written down on the board itself.

Please help to find what is signal board part # for this TV.
Also chassis # is ITC222

Thank you

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

The rca # is264110

Posted on Jun 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,030 Answers

264110

Posted on Mar 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get any channels with my coby tv


This COBY only has an analog tuner. Thus unless you are close to one of the remaining low-power stations, you need a digital-to-analog converter for OTA TV signals. For digital TV, you should use antennaweb.org or tvfool.com to identify the antenna and direction for the digital signals that you may be able to receive. Antennaweb assumes an outdoor antenna is conservative in the channel list it provides. Digital signal is either enough to register with the tuner or No Signal. An amplifier may be needed is the signal is split to several TVs.

If you have cable, check the type of signal coming in to the TV. If the signal has been switched to digital, you need a set top box.

I hope this helps.

Cindy Wells

Nov 24, 2010 | Coby TVDVD1350 13 in. TV/DVD Combo

1 Answer

What antenna do you recommend wit the RCA 20F510TD


This tv has an analog tuner so you will need a digital-to-analog tuner set-top box (assuming you live in an area where most stations have been converted to digital TV broadcast). Whichever tuner you use, the recommended antenna will depend on where you live and how many tall objects are between you and the transmitters. Go to antennaweb.org or tvfool.com and type in your address. Antennaweb assumes an external antenna but is still very conservative in the channels it will identify as watchable in your area. Tvfool.com lists the channels by direction and the antenna type (by color) you will need to receive them. The color rating is based on how far the stations signal travels to reach your location. An amplifier can help you receive stations that are marginal to your location. (Digital signals are sufficient for the TV to tune them in or you get "no signal" messages.)

I hope this helps.

Cindy Wells
(I'm in a rural area with an external antenna with a signal splitter/amplifier. Antennaweb suggests I will only get the stations ~10 miles away. In fact I get the stations from there as well as the ones ~30 miles away.)

Sep 11, 2010 | RCA 20F510TD 20 in. TV/DVD Combo

1 Answer

Blue Screen


Hello, If you are using this combo with cable and the channels just coming through, you will need to replace the tuner(mounts vertically on the main board and it's located directly behind the cable/antenna connector). If you are trying to use this TV with a set of rabbit ears, the free signal channels turnes digital last year and that is why you get nothing. The tuner as an assembly is still available from a couple of sources: Partstore.com and Union Electronics(johnl@ued.net)

Apr 23, 2010 | RCA T19064 19 in. Combo

1 Answer

Connecting my TV and DVD player to a digital set top box


There are 4 different types of cables and they have to do with the quality and resolution of what they carry.
1) Coaxial or an RCA to RCA, 'Yellow colored connectors' - Composite video - Lowest quality of video you can get. Mostly what people hook up from their VCR's. '240 to 480 lines of interlaced resolution.

2) S-VHS cable - 4 pins - Carry Chroma 'Color' over the one set of two pins and Luminance 'B&W' signal over the other 2 pins. This is a higher resolution than the Composite video cable - 480 to 512 'still interlaced resolution' or ' i ' .

3) Component cables - RCA ends but there are 3 of them. Red colored 'for the Red video signal', Green colored connector 'for the Green video signal with Vertical sync laid on top of it,' and then Blue colored 'for the 'yep you guessed it' the Blue video signal with the horizontal carrier laid on top of the signal'.
This is the higher resolution of 720 ' i ' interlaced or even when selected by your piece of output equipment up to 1080p 'Progressive' resolution if your equipment can output this highest resolution.

4) HDMI - is a cable that not only carries the component but does it digitally along with audio and an ID bit that the Transmitting equipment 'STB' in this case should communicate with your 32" LCD HD-TV so that it will put out the maximum signal 'probably 1080P' that your TV will handle.
I would try to obtain an HDMI cable and use this to connect your STB to your LCD for the best connection between your two units.
Blessings,
A/V Media Guy

Nov 22, 2009 | Combination Televisions

1 Answer

Local channel went digital, lost signal.


You need a digital to analog convertor box to recieve the digital signal.

All UHF+VHF signals will be digital starting in June.

Thanks for using FixYa - a FixYa rating is appreciated.

Feb 20, 2009 | Combination Televisions

1 Answer

How do I get sounds when I use the red green blue rca hook ups?


The red, blue and green RCA hook up is just video. You must also use the red and white pair of RCA jacks for the audio. You can usually find the audio red and white jacks right below the video red, blue and green RCA jacks. Get yourself an audio RCA cord with the red and white connectors and run that from your video device audio output to the audio input of the TV that corresponds with the video input of the TV. An example would be if the red, blue and green are on the "Video 1" input of your TV you will find the red and white audio input for "Video 1" right below or right next to the video inputs.

The red, blue and green video jacks are called "component video" and they only have a video signal for high definition video, so you must also run a separate audio line for it. The same holds true for the yellow video RCA connector, that one is called "composite video" and it also has only a video signal with no audio.

I hope this helps, if so a "FixYa!" rating would be very much appreciated.

If you need more help just post your concerns right here onthis thread.

Dave

Nov 28, 2008 | Initial DTV-171 17 in. TV/DVD Combo

1 Answer

Digital compatable


You need a converter box or just get basic cable,, no its not digital,, its standard,,, thanks

Oct 05, 2008 | RCA T25062 25 in. Combo

1 Answer

61 in big screen


Yes you can. I would suggest that you contact the manufacture for the exact replacement part and then have a qualified technicial replace the screen. Now if the mirror is also cracked you will have to get that from the manufacture also.

Oct 01, 2007 | RCA D61W136D 61 in. TV/DVD Combo

1 Answer

TV won't turn on, timer LED flashing


If the TV goes in standby, then it is in protection mode.

Ensure also that the fault is not coming from a faulty receiver box sending
bad signal, check if you get same problem on DVD with no receiver box
connected.

Try first leaving the TV power cord unplugged for some times, let say one hour or so.

The flashing light indicates a diagnostic state called protection.
When the TV goes on protection there are only two possible causes.

1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or abroken contact, identified an internal fault and kicked in , starting the flashing light.

If you are in situation one, then the TV will reset just unplugging power cord for one or two hours,sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

If under warranty contact the manufacturer ringing the number on the user manual

If you want to repair at your own expenses, just locate any good qualified repairer.

If you want to DIY you find parts here,

All: Appliance parts, electronics parts & more from PartStore.com

Encompass Parts Distribution

LCD/Plasma Electronic Replacement Parts: Plasma & LCD TVs, Appliances |


On LCD Pay particular attention at inverter and power board, power board can be inspected looking for bulged or leaking capacitors, then tested with a multimeter. The inverter is more difficult to test , there is need to read voltages, should be done by a tech. Also the LCD controller board can cause same problem

On Plasma, test Sustain (Ysus/Zsus) / Buffer boards , cables to plasma, digital board and power board.

On Rear Projection : check lamp, lamp ballast, power board, and convergence.

On CRT TVs, check ballast , flyback transformer, CRT, Tuner, Convergence.

Dec 19, 2006 | RCA T25061GY 25 in. Combo

Not finding what you are looking for?
RCA D56W136D 56 in. TV/DVD Combo Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Combination Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you a RCA Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...