Question about Rotary Tools

1 Answer

Liftmaster Garage Door Opener Problem

Hello Door Tech: Can you go to the Sears Garage Door Opener Form and see if you can diagnose the problem I am having? The post is about the opener only humming when you try to use it I added a post to someone else's post. Thanks, John PS: I could not find Garage Door Openers in the Product Categories.

Posted by on

  • downundertek Jan 11, 2009

    Thanks for the advice on replacing the capacitor even though this did not fix my problem. I removed the GDO motor & head assembly and took it to my local GDO service center and the technician quickly found the circuit board was burnt out. There was a portion of the board that was dark brown (burned area) compared to the rest of it. It was a very old GDO unit (unknown age) so I purchased a new unit and I installed it yesterday. The new one has the safety reversing sensors at the bottom of the door which I am glad to have. Thanks for your help.



×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 98 Answers

The Capacitor is a 53-64 MFD 220 VAC. A bad capacitor will cause what you are experiencing.

Posted on Jan 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

--where do you get brushes for craftsman rotarytool mod 572360530


1-800 - sears - parts or sears /parts .com
they have everything that is sold in a sears store
there prices are even good on tools and bits for these

Sep 04, 2014 | Rotary Tools

1 Answer

I need a new chuck.


Lowes, home depot and Sears sell them. Also, dremel.com sells parts.

Jun 24, 2014 | Dremel Variable - Speed Multipro Rotary...

1 Answer

Model sears


What is the problem?

May 15, 2014 | Craftsman Rotary Tools

1 Answer

How do I get to the brushes in my Craftsman 2.0A Multi-Tool?


Call Sears parts at 1-888-204-3725 describe your tool and ask for a users manual and a parts explosion map.

Oct 20, 2013 | Rotary Tools

1 Answer

I was using my friends Craftsman Rotary tool to shave down a metal door jamb and it got hot so i shut it off. Turned it back on for a second, and has not worked since. It's been 3 days. Is there a way...


You probably burned up the brushes.You can take it to Sears and have them send it in to have them replaced, but in the long run it will be cheaper and a lot faster to buy a new one. Rotary tools are not made to take a lot of stress. Besides your friend will see how much of a nice guy you are and how honest you are and won't be afraid to lend you tools in the future.

Jun 12, 2011 | Craftsman Rotary Tools

1 Answer

Chamberlain CG40 CDM 1/2 hp motor does not rotate


Here is the manual:
The fault it's reading is 'Motor overload'
http://www.chamberlain-diy.com/doityourself/pdfdocs/114A3215.pdf

The motor could be stuck, check for free travel on chain drive and make sure nothing is stuck on door...

Sep 20, 2009 | Rotary Tools

1 Answer

Manual for Sears Craftsman Home Sharpener 19071


my bet is you need to replace the belts, I posted the belt info. http://www.bobvila.com/BBS/Craftsman_Sharpener_drive_belts__out_of_stock_sure-Tools-1-F909.html#2827

part number 100XL037 1/5 pitch (XL) timing belt

you will need 2 of them, price was $4.21 a belt

very easy to change out 1 on a scale of 10 for difficulty. you have to know how to operate a screwdriver.

shipping was $6.68

phone is 951-677-7424 www.surfrainbow.com in California

Aug 24, 2009 | Craftsman Rotary Tools

1 Answer

Dremel model 395 went dead after a total of 25hrs use over 3years


Hello I am a woodworker also so I admire your project for your deaughter.

Your dremel 395 had a two year warranty. I would recommend that you get a new one or even a newly reconditioned one as the cost of the repair will be over 60 dollars. let me know what u decide to do......happy woodworking either way.

May 27, 2009 | Dremel 395 Variable Speed Multipro Rotary...

Not finding what you are looking for?
Rotary Tools Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rotary Tools Experts

Mike

Level 3 Expert

4331 Answers

Jay Finke
Jay Finke

Level 3 Expert

1222 Answers

Brad Brown

Level 3 Expert

13536 Answers

Are you a Rotary Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...