VIDEO DECODER PROBLEMS - Computers & Internet

If your Openview decoder is flashing a red light, it usually indicates that there is a problem with the device. Here are some things you can try to resolve the issue:
1?Check your cables: Make sure that all the cables are securely connected to the decoder and the TV. If any of the cables are loose, this can cause problems.
2?Restart the decoder: Unplug the decoder from the power outlet, wait for 30 seconds, and then plug it back in. This will often reset the device and resolve the issue.
3?Check for signal problems: If the red light persists, check the signal strength on your decoder. Navigate to the signal strength option on your Openview menu, and if the signal strength is low, this could be the issue. Try adjusting the dish or antenna position or contact your service provider for assistance.
4?Contact Openview support: If none of the above solutions works, contact Openview support for further assistance. They may need to remotely diagnose your decoder or offer a replacement if it is faulty.
I hope this helps resolve the issue with your Openview decoder.

Power fluctuations
https://www.askmefast.com/MY_DSTV_DSD_3U_DECODER_IS_DISPLAYING_ONLY_ORANGE_STEADY_LIGHT-qna9330642.html

Or it might be dad service, or downloading new software

[Responded] Poor service / Decoder software removed ' DStv ...

www.hellopeter.com > dstv-multichoice > reviews > po...

Mar 14, 2018 - However, the problem escalated now whereby my DSD 3U DSTV decoder suddenly switched off and only display an amber light in the middle ...

Gotv decoder showing a yellow / Orange light constantly

myofflinestash.com > index.php > gotv-decoder-showi...

Solid Red This means that the decoder is in StandBy Mode, this is similar to a computer being put in sleep mode. · Solid Amber This state of the decoder means ...

Quick Guide - DStv

cdn.dstv.com > selfservice > documentation

PDF The moment you connect your DStv HD Decoder, is the moment your TV viewing experience will become ... Solid AMBER = decoder is downloading software.
..

Was it working before? Are you using it as aTV or Video (Video = when a decoder or DVD player is connected)

Have you Tried looking on google you youtube for files or a patch maybe?

If this problems,the tv is causing this by itself,not by somebody or something hitting the LCD screen panel by causing the damaging the LCD screen panel itself.If this problems is causing by the tv itself,the T-CON decoder board is dead.This T-CON decoder board sit wright at the middle bottom of the tv LCD screen panel.Replace this T-CON decoder will solved this problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish T-CON decoder board for the replacement.

Try the Free Decoder addon K-Lite Codec Pack 5.51 posted on FileHippo.com. If not.... the Video Card may have a Driver Update and that should include the Decoder Software for TV or Cable.

well you can download the vlc program which can easily play the all format videos........this program u can download it from here

http://www.videolan.org/vlc/download-windows.html

Step 1: Unplug any cables that are connected loadTOCNode(3, 'moreinformation'); a. Unplug any cables that are connected to the video outputs of the computer. b. Try to read the disc again. c. If you still experience problems with the disc, go to step 2.
Step 2: Update the DVD driver loadTOCNode(3, 'moreinformation'); a. Contact the manufacturer of the DVD Drive to obtain an updated driver for the DVD drive, and then follow the manufacturer’s instructions to install the driver. b. Try to read the disc again. c. If you still experience problems with the disc, go to step 3.
Step 3: Obtain a hardware-based DVD decoder or software-based DVD decoder loadTOCNode(3, 'moreinformation'); a. Contact the manufacturer of the DVD Drive to obtain a hardware-based DVD decoder or software-based DVD decoder, and then follow the manufacturer’s instructions to install the decoder.

Note Many video adapters help decode DVD discs. However, the video adapter may not fully decode a DVD movie. b. Try to read the disc again. c. If you still experience problems with the disc, make sure that the sound card in the computer is compatible with the DVD drive.

Note Hardware and software decoders usually need a sound card to play back DVD movies. d. Try to read the disc again. e. If you still experience problems with the disc, contact the manufacturer to obtain a new disc. .
Remove Duplicate Drives loadTOCNode(2, 'moreinformation'); Remove any duplicate CD-ROM or DVD drives being loaded by Windows. To do this: 1. Click Start, point to Settings, and then click Control Panel. 2. Double-click System. 3. On the Device Manager tab, click View Devices By Type. 4. Double-click the CDROM or DVD branch to expand it. 5. Note the properties for each device listed in the branch. To do this: a. Click a device, and then click Properties. b. Click each tab in the device properties dialog box, and then record the device information and settings. c. Click OK. 6. Click OK, and then close Control Panel. 7. Restart Windows in Safe mode. To do this, use the appropriate method for your version of Microsoft Windows.

To work around this issue, open Control Panel, and then follow these steps to configure the DMA/PIO settings for a controller: 1. Click Start, click Run, type devmgmt.msc, and then click OK. 2. Expand IDE ATA/ATAPI Controllers. 3. Right-click the controller that you want to configure DMA/PIO settings for, and then click Properties. 4. Click the Advanced Settings tab. 5. In the Transfer Mode box, click either PIO Only or DMA if available

Troubleshoot DVD problems loadTOCNode(2, 'moreinformation');
Step 1: Unplug any cables that are connected loadTOCNode(3, 'moreinformation'); a. Unplug any cables that are connected to the video outputs of the computer. b. Try to read the disc again. c. If you still experience problems with the disc, go to step 2.
Step 2: Update the DVD driver loadTOCNode(3, 'moreinformation'); a. Contact the manufacturer of the DVD Drive to obtain an updated driver for the DVD drive, and then follow the manufacturer’s instructions to install the driver. b. Try to read the disc again. c. If you still experience problems with the disc, go to step 3.
Step 3: Obtain a hardware-based DVD decoder or software-based DVD decoder loadTOCNode(3, 'moreinformation'); a. Contact the manufacturer of the DVD Drive to obtain a hardware-based DVD decoder or software-based DVD decoder, and then follow the manufacturer’s instructions to install the decoder.

Note Many video adapters help decode DVD discs. However, the video adapter may not fully decode a DVD movie. b. Try to read the disc again. c. If you still experience problems with the disc, make sure that the sound card in the computer is compatible with the DVD drive.

Note Hardware and software decoders usually need a sound card to play back DVD movies. d. Try to read the disc again. e. If you still experience problems with the disc, contact the manufacturer to obtain a new disc

Your video card should have a DVD decoder built into it. If you are actually asking about DVD software however, you can try using Windows Media Player.