Question about Disney Princess Alarm Clock Radio

Open Question

My daughter received the Disney princess alarm clock P300ACR for Christmas. When I set the clock, the minute advances every 11 seconds. Is this an internal mechanical failure or is it something I can fix on my own?

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: Disney Princess Alarm Clock Radio

I can not get the radion to work or the projection light to work. No instruction manual.

Posted on Nov 16, 2008

  • 93 Answers

SOURCE: disney mix stick software

You don't need the disk that came with the Mix Stick. It's just a plug in that interfaces with Windows Media Player and it completely optional. Without the software you can still use the Sync function in Windows Media Player to synchronize songs to the player.

Posted on Dec 02, 2008

  • 9 Answers

SOURCE: Disney 13' Princess tv

You've tried all the codes for your TV, but you still cannot get the remote control to operate your TV.

  1. Turn on your TV.
  2. On the remote control, press TV once.
  3. Then press and hold SETUP until the TV key blinks twice, then release the SETUP key.
  4. Using the number pad, enter 9-9-1. The TV key will blink twice.
  5. Aim the remote control at the TV and slowly alternate between pressing Power and TV. Stop when the TV turns off after pressing the POWER key. This means that a working code has been found.
  6. Press the SETUP key once to lock in the code. The TV key will blink twice.
Hope this helps

Posted on Jan 16, 2009

  • 3 Answers

SOURCE: Disney princess dvd player will not play any dvd!

We had the same issue. Try clicking <play>1234<play> and it should unlockk the dvd in the machine. Seems to work on my daughters. It's a parental control of come sort. HTH.

Posted on Feb 01, 2009

stonephoenix
  • 563 Answers

SOURCE: replace remote for disney princes p1310atv tv?

Look on the back of the TV or in the back of the manual and you'll see the name of the company that manufactured and/or distributed the TV, or you may find a telephone number listed in the manual. You must contact the manufacturer to find a replacement remote for that TV. Universal remotes don't work because that set is actually made by a small company that doesn't communicate with universal remote makers.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further.

Posted on Jul 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Set this Princess international electronic P17010 wind chime alarm clock?


Download (PDF) here is a link to the manual. been trying for ages to find them and finally happened on them. hope this helps.

Feb 27, 2015 | Princess International Electronic Wind...

1 Answer

I just got a Memorex Digital CD Alarm Clock with no manul the modle number is MC 7101. I'm not able to set the clock or alarm. I just need the instructions.


To set the clock:
1. With the power off, press the TIME button; the time will blink.

2. Press the MINUTE button to set the present minute and the HOUR button to set the present hour.
Make sure to set the correct AM/PM setting.

3 Press the TIME button (or wait approx. 15 seconds) and the time will be set.

To set or reset alarm time:
1. With the power off, press the desired ALARM, Press and hold the desired ALARM 1 or ALARM 2 button; the alarm time will blink. The Alarm 1 or Alarm 2 time and settings will appear.
Press the MINUTE button to set the alarm.

2. Press and hold the desired ALARM 1 or ALARM 2button; the alarm time will blink.
Press the MINUTE button to set the alarm minute and the HOUR button to set the alarm hour. Make sure
to set AM/PM setting. Press the ALARM 1 or ALARM 2button again (or wait approx. 15 seconds).

3. Repeatedly press the ALARM 1 or ALARM 2 button to select alarm off, alarm on, for buzzer, radio or CD.

If you needed the manual it could be downloaded:
http://www.retrevo.com/support/Memorex-MC7101-Clock-Radios-manual/id/1081dj880/t/2/

Thanks.
gylacz

Aug 01, 2011 | Memorex MC7101 Clock Radio

1 Answer

Can't set alarm


Push the center botton on the back until you see WAKE I and then by holding it dwon push the bottons on either the right ir left of that button to set the alarm.... same process for WAKE 2...just have to push the center botton again

Jan 05, 2009 | RCA Alarm Clock w/CD Player, AM/FM Stereo...

1 Answer

Is there any way to turn the sound on and leave it on all night?


just set the alarm and don't turn it off. if that doesn't work then it probably won't work.

Dec 08, 2008 | Timex 4056 Clock Radio

1 Answer

Disney Princess Alarm Clock Radio


I can not get the radion to work or the projection light to work. No instruction manual.

Sep 18, 2008 | Disney Princess Alarm Clock Radio

3 Answers

Sharper Image Projection US Atomic Alarm Clock (model number OQ311)


try looking up the manual on the model number you might find it online. I have the maual for this model.

Jun 10, 2008 | Audio Players & Recorders

1 Answer

How to set alarm and ring with radio?


Hi gidgid.
This is direct from manual mailed to me from Oregon Scientific re my own contrast problem.
1. Press [ALARM] to switch to display the alarm setting.
2. Select ALARM 1 or ALARM 2 using [ALARM].
3. Press and hold [ALARM] for two seconds.
4. Use VOLUME [ + ] / [ - ] to enter the hours.
5. Press [ALARM].
6. Use VOLUME [ + ] / [ - ] to enter the minutes.
7. Press [ALARM].
8. Use VOLUME [ + ] / [ - ] to select ALARM or RADIO. If
ALARM is selected, a two-minute crescendo alarm will be
emitted at the set time when the alarm is active. If RADIO is
chosen, the radio will be turned on for two hours at the set time
instead.
9. If RADIO is chosen, use [STATION] to choose the radio
station and press [AM / FM] to select AM or FM.
10. Press [ALARM].
11.Use VOLUME [ + ] / [ - ] to set the volume of the wake up radio.
12. Press [ALARM] to exit.
Note: If there is no battery for the radio, there is no operation for
step 9 ~ 11.
sleepy head

Jan 13, 2008 | Oregon Scientific RRM112 Clock Radio

3 Answers

Centrios Atomic Desk Clock/Temperature


Here is how you adjust the time zone:
1.) push MODE till "AL" appears after the minute.
2.) tap "SET" (tap means push but do not hold) and time zone will advance.

3.) THE TRICK: The Time Zone can only be set in the Alarm Mode. Make sure you so not push and hold "SET" until the hour flashes as you would to set the alarm time. You just go into Alarm Mode and tap "SET" to advance the Time Zone by one zone per tap. When the Time Zone is where you want it, tap MODE to return to the clock and set the correct time.

Nov 08, 2007 | Audio Players & Recorders

4 Answers

Changing time on RCA CD clock radio


UNPLUG!!! Wait 15 seconds. Plug in again, CLOCK will flash 12am.
Press "set" button ONCE.
Press Double Back Arrows |<< to go backward from Midnight
or
Press Double Forward Arrows |>> to go forward from Midnight

(Either press-hold the Double Arrows for quick minute-scroll or repeat-press Double Arrow for a slower minute-by-minute change.)

Sep 20, 2007 | RCA Radio Alarm Clock

Not finding what you are looking for?
Disney Princess Alarm Clock Radio Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Disney Audio Players & Recorders Experts

Blake

Level 2 Expert

136 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

69814 Answers

Are you a Disney Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...